Determination of total carbon and total organic carbon from volatile air pollutants. Part I

Summary A new method of collection of representative air samples for the determination of TC and TOC from volatile air pollutants has been developed. The organic substances undergo combustion and only the carbon dioxide produced is concentrated on molecular sieve 5 A at ambient temperature. The CO₂ is subsequently liberated by thermal desorption at ca. 380°C in a stream of purified gas. Atmospheric CO₂ must be removed first and this can be done (at the sample flow rate of 700 ml/min) by a layer of Ascarite heated at 90° C. Organic compounds passing through the layer are then combusted by a dynamic method utilizing Körbl catalyst and the CO₂ formed is concentrated on a molecular sieve 5 A, followed by thermal desorption and final determination. Organic acids are also retained by the first CO₂ absorber. A diffusion cell for preparation of the mixtures of purified air with vapours of organic compounds is described.

---

Zusammenfassung Eine neue Anreicherungsmethode zur Gewinnung representativer Luftproben zur Bestimmung des Gesamtkohlenstoffgehaltes und des Gehaltes an organischem Kohlenstoff (TOC) aus flüchtigen Luftverunreinigungen wurde entwickelt. Während der Probenahme werden die flüchtigen Verunreinigungen verbrannt und nur das entstandene Kohlendioxid bei Zimmertemperatur am Molekularsieb 5A angereichert. Anschließend wird CO₂ bei ca. 380° C im gereinigten Gasstrom thermisch desorbiert. Bei der TOC-Bestimmung muß atmosphärisches CO₂ vorangehend aus dem Luftstrom entfernt werden und wird an einer auf 90° C erwärmten Ascariteschicht gebunden. Die durchfließenden organischen Verbindungen werden dann im dynamischen System am Körblkatalysator oxydiert, das entstandene CO₂ am Molekularsieb 5A angereichert, thermisch desorbiert und einer Endbestimmung zugeführt. Organische Säuren werden gleichfalls durch den ersten CO₂-Absorber gebunden. Eine Diffusionszelle zur Herstellung von Gemischen gereinigter Luft mit Dämpfen organischer Verbindungen wurde beschrieben.

     

Thermal behavior of selected ferroelectric liquid crystals

Thermal properties of three ferroelectric liquid crystals, namely: 3-octyloxy-6-[2-fluor-4-(fluoroctyloxy)phenyl]-pyridine (FFP), 3-(3-fluor-nonyl)-6[4-heptyloxyphenyl]-pyridine (FNHPh-P), 4-[(S,S)-2,3-epoxyhexyloxy]phenyl 4-(decyloxy)benzoate (EHPhDB) were studied using heat flux differential scanning calorimetry method. All the transitions expected in this compounds, except the SmC^*-SmA^* and SmC^*-S₃ transitions, were detected in the DSC curves. The temperatures of the phase transitions and the enthalpy changes associated with them were determined. The transition from the liquid crystalline to the crystalline state showed significant hysteresis for all three compounds studied. The following transitions: SmA^*-Is, SmG^*-SmC^* for FNHPh-P, N^*-Is for EHPhDB, N^*-Is and SmC^*-N^* for FFP also showed a small hysteresis basing on which first-order character of all the above transitions was implied. All three substances studied in this work are characterized by a complex polymorphism in the solid state.The author is grateful to Dr. Stanislaw Wróbel for his stimulating interest, valuable discussions and supplying the samples. This work has been done in the framework of the KBN grant 2 P302 139 07.     

1,4-dioxane as a solvent in spectroscopy and photochemistry

Commercially available 1,4-dioxane, even of spectroscopic grade, contains various impurities that arise mostly from reaction of the solvent with oxygen. Aspects relevant to the spectroscopy and photochemistry of the dioxane/oxygen system are discussed. Methods of purification and storage of the solvent are presented.     

Controlled Rate Thermal Analysis of Hydrated Borates

Quasi-isothermal-isobaric analysis was applied as a main method for investigation of thermal decomposition of borates. The structural mechanism of the dehydration and dehydroxylation of selected borates is considered. It has been found that they consist of two independent stages: formation of gaseous water molecules localized into the structural framework and their release. The internal pressure of gaseous water molecules is the factor influencing the course of these processes. The strengths of the chemical bonds of the components and the freedom of their displacement also determine thermal stability of hydrated borates. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

The effect of increasing the average column pressure (ACP) on the heterogeneous adsorption of insulin variants on a C18-bonded silica was studied in isocratic reversed-phase HPLC. Adsorption isotherm data of lispro and porcine insulin obtained for values of the ACP ranging from 57 to 237 bar were fitted to the Langmuir-Freundlich and the Tóth equation. The resulting isotherm parameters, including the equilibrium adsorption constant and the heterogeneity index, were next used for the calculation of distribution functions characterizing the energy of interactions between the adsorbed insulin molecules and the stationary phase. It was observed that increasing the pressure by 180 bar causes a broadening of the distribution functions and a shift of the position of their maximum toward lower interaction energies. These findings suggest that, under high pressures, the insulin molecules interact with the stationary phase in a more diversified way than under low pressures. Additionally, the most probable value of the energy of the insulin-surface interactions becomes lower when the ACP increases. The pressure-induced changes in the interaction of insulin variants with the hydrophobic surface are attributed to a possible conformational flexibility of the molecular structure of this protein.     

Modified electrodes based on lipidic cubic phases

The lipidic cubic phase can be characterized as a curved bilayer forming a three-dimensional, crystallographical, well-ordered structure that is interwoven by aqueous channels. It provides a stable, well-organized environment in which diffusion of both water-soluble and lipid-soluble compounds can take place. Cubic phases based on monoacylglycerols form readily and attract our interest due to their ability to incorporate and stabilize proteins. Their lyotropic and thermotropic phase behaviour has been thoroughly investigated. At hydration over 20%, lipidic cubic phases Ia3d and Pn3m are formed. The latter is stable in the presence of excess water, which is important when the cubic phase is considered as an electrode-modifying material. Due to high viscosity, the cubic phases can be simply smeared over solid substrates such as electrodes and used to host enzymes and synthetic catalysts, leading to new types of catalytically active modified electrodes as shown for the determination of cholesterol, CO(2), or oxygen. The efficiency of transport of small hydrophilic molecules within the film can be determined by voltametry using two types of electrodes: a normal-size electrode working in the linear diffusion regime, and an ultramicroelectrode working under spherical diffusion conditions. This allows determining both the concentration and diffusion coefficient of the electrochemically active probe in the cubic phase. The monoolein-based cubic phase matrices are useful for immobilizing enzymes on the electrode surface (e.g., laccases from Trametes sp. and Rhus vernicifera were employed for monitoring dioxygen). The electronic contact between the electrode and the enzyme was maintained using suitable electroactive probes.     

Micropatterning chemical oscillations: waves, autofocusing, and symmetry breaking

Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.     

Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.