New phosphonic analogs of aspartic and glutamic acid by aminoalkylation of trivalent phosphorus chlorides with ethyl acetyloacetate or ethyl levulinate and benzyl carbamate

Preparation of the phosphonic analogs of -methylaspartic (4 a–d), glutamic (7 a–b) and -methylpyroglutamic (5 a–b) acids by aminoalkylation of trivalent phosphorus chlorides with ethyl esters of oxoalkyloacids and benzyl carbamate is described. The phosphonic analogs of pyroglutamic acid (8 a–b) was obtained by the cyclization of the corresponding esters (9 a–b). The stability of the phosphonic analogs of pyroglutamic acid in acidic and alkaline media was also studied.

---

Die Herstellung von neuen Phosphonanalogen der Asparagin- und Glutaminsäure in der Reaktion von trivalenten Phosphorchloriden mit Ethyl-acetyloacetat oder Ethyl-lävulinat bzw. Benzylcarbaminat

Zusammenfassung Es wurde die Darstellung der Phosphonanalogen der -Methylasparaginsäure (4 a–d), Glutamin- (7 a–b) und -Methylpyroglutaminsäure (5 a–b) in der Reaktion der trivalenten Phosphorchloride und der Oxoalkansäureethylester sowie des Benzylcarbaminats beschrieben. In der Ringschlußreaktion der Ester (9 a–b) erhält man Phosphonanaloge der Pyroglutaminsäure. Die Stabilität der Analogen der Pyroglutaminsäure wurde in sauren und alkalischen Medien geprüft.

     

Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

The effect of increasing the average column pressure (ACP) on the heterogeneous adsorption of insulin variants on a C18-bonded silica was studied in isocratic reversed-phase HPLC. Adsorption isotherm data of lispro and porcine insulin obtained for values of the ACP ranging from 57 to 237 bar were fitted to the Langmuir-Freundlich and the Tóth equation. The resulting isotherm parameters, including the equilibrium adsorption constant and the heterogeneity index, were next used for the calculation of distribution functions characterizing the energy of interactions between the adsorbed insulin molecules and the stationary phase. It was observed that increasing the pressure by 180 bar causes a broadening of the distribution functions and a shift of the position of their maximum toward lower interaction energies. These findings suggest that, under high pressures, the insulin molecules interact with the stationary phase in a more diversified way than under low pressures. Additionally, the most probable value of the energy of the insulin-surface interactions becomes lower when the ACP increases. The pressure-induced changes in the interaction of insulin variants with the hydrophobic surface are attributed to a possible conformational flexibility of the molecular structure of this protein.     

Modified electrodes based on lipidic cubic phases

The lipidic cubic phase can be characterized as a curved bilayer forming a three-dimensional, crystallographical, well-ordered structure that is interwoven by aqueous channels. It provides a stable, well-organized environment in which diffusion of both water-soluble and lipid-soluble compounds can take place. Cubic phases based on monoacylglycerols form readily and attract our interest due to their ability to incorporate and stabilize proteins. Their lyotropic and thermotropic phase behaviour has been thoroughly investigated. At hydration over 20%, lipidic cubic phases Ia3d and Pn3m are formed. The latter is stable in the presence of excess water, which is important when the cubic phase is considered as an electrode-modifying material. Due to high viscosity, the cubic phases can be simply smeared over solid substrates such as electrodes and used to host enzymes and synthetic catalysts, leading to new types of catalytically active modified electrodes as shown for the determination of cholesterol, CO(2), or oxygen. The efficiency of transport of small hydrophilic molecules within the film can be determined by voltametry using two types of electrodes: a normal-size electrode working in the linear diffusion regime, and an ultramicroelectrode working under spherical diffusion conditions. This allows determining both the concentration and diffusion coefficient of the electrochemically active probe in the cubic phase. The monoolein-based cubic phase matrices are useful for immobilizing enzymes on the electrode surface (e.g., laccases from Trametes sp. and Rhus vernicifera were employed for monitoring dioxygen). The electronic contact between the electrode and the enzyme was maintained using suitable electroactive probes.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Incorporation of Na(+),K(+)-ATP-ase into the thiolipid biomimetic assemblies via the fusion of proteoliposomes

The black lipid membranes (BLMs) are artificial membrane systems that have been widely used in the study of different biological processes. In this paper the planar bilayer lipid membranes have been used to study the behavior of thiolipid molecules-dipalmitoyl-phosphatidyl-ethanolamine-mercaptopropionamide (DPPE-MPA) and cholesteryl 3-mercaptopropionate (Chs-MPA)-as compared to classical BLM made of natural lipids. We present our experiments on black thiolipid bilayer (BTM) formation from a thiolipid solution and basic results of pump currents generated by sodium-potassium pump-Na(+),K(+)-ATP-ase-introduced to such bilayer systems via proteoliposome adsorption with subsequent fusion. Our results imply that no substantial difference exists between BLMs formed from classical lipids and those made from thiolipids used in this study. The same thiolipid molecules were subsequently used for the formation of covalently bound, tethered bilayer lipid membranes (t-BLMs) on polycrystalline gold electrodes. Similarly, as in the case of BLMs, we took advantage of proteoliposome adsorption/fusion to obtain a t-BLM system with reconstituted enzyme. The vesicle fusion on hydrophobic or hydrophilic substrates is one of the main ways to obtain a bilayer system with incorporated biological species. In this paper we present also our preliminary results of electrochemical experiments using rapid solution exchange technique on such t-BLMs systems and their comparison with painted solid supported membranes (SSMs) and BLMs. We have also followed the process of vesicles fusion onto thiolipid monolayer by means of in situ atomic force microscopy in tapping mode (TM-AFM). On the basis of these experiments, we conclude that DPPE-MPA and Chs-MPA molecules used in our experiments preserve lipid properties, allowing for at least partial reconstitution of Na(+),K(+)-ATP-ase into such t-BLMs. On the other hand, the relatively compact organization on polycrystalline gold and the hydrophobic nature of the first monolayer of tethered thiolipids slows down the proteoliposome fusion onto such monolayers and consequently hinders the protein insertion. However, this effect can be overcome by mechanical stimulus that facilitates proteoliposome delamination onto the self-assembled monolayer.     

Intrinsic and extrinsic factors in anion electron-stimulated desorption: D- from deuterated hydrocarbons condensed on Kr and water ice films

The results of D(-) ion desorption induced by 3-20 eV electrons incident on condensed CD(4), C(2)D(6), C(3)D(8), C(2)D(4), and C(2)D(2) are presented. These compounds were deposited in submonolayer amounts on the surfaces of multilayer solid films of Kr and nonporous and porous amorphous ice. While desorption of the D(-) anions proceeds via well-known processes, i.e., dissociative electron attachment (DEA) and dipolar dissociation, significant perturbations of these processes due to presence of the different film substrates are observed. We have shown that it is possible to distinguish between the character and nature of these perturbations. The presence of the nonporous ice perturbs the D(-) desorption intensity by affecting the intrinsic properties of the intermediate anion states through which dissociation proceeds. On the other hand, the presence of the porous ice introduces extrinsic effects, which can affect electron energy losses prior to their interaction with the hydrocarbon molecule and/or the energies and intensities of the fragment species after dissociation. Simple mechanisms responsible for the observed variations in the intensities of desorbed anionic signals are proposed and discussed. Electron transfer from transient anion states to electron states of the substrate film or nearby hydrocarbon molecules appear as the most efficient mechanism to reduce the magnitude of the DEA process.     

Kinetics and equilibrium of multicomponent adsorption on chiraly templated surfaces

In this contribution we propose a simple model of adsorption of a binary (racemic) mixture on a chiraly templated surface. As an example, the adsorption of a liquid mixture of enantiomers on a chiral stationary phase (CSP) is considered. In particular, we study the effect of the lateral interactions in the adsorbed phase on the kinetic and equilibrium isotherms of the enantiomers. Additionally, we investigate the influence of the composition of the surface on the performance of the CSP in the presence of the lateral interactions. To that end, the adsorption of the mixture is modeled by using Monte Carlo simulations as well as by applying an analytical approach involving rate equations coupled with the Mean Field Approximation (MFA). The predictions of the theory are found to be in good agreement with the results of the simulations.     

Fine tuning the structure of the Cu2+ complex with the prion protein chicken repeat by proline isomerization

The interaction between the single hexarepeat unit of chicken prion protein [ChPrP(54-59)] and Cu(II) was investigated by NMR, finding different coordination modes for the trans/trans and cis/trans isomers.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.