Kinetics and equilibrium of multicomponent adsorption on chiraly templated surfaces

In this contribution we propose a simple model of adsorption of a binary (racemic) mixture on a chiraly templated surface. As an example, the adsorption of a liquid mixture of enantiomers on a chiral stationary phase (CSP) is considered. In particular, we study the effect of the lateral interactions in the adsorbed phase on the kinetic and equilibrium isotherms of the enantiomers. Additionally, we investigate the influence of the composition of the surface on the performance of the CSP in the presence of the lateral interactions. To that end, the adsorption of the mixture is modeled by using Monte Carlo simulations as well as by applying an analytical approach involving rate equations coupled with the Mean Field Approximation (MFA). The predictions of the theory are found to be in good agreement with the results of the simulations.     

Lupane-type pentacyclic triterpenes in Langmuir monolayers: a synchrotron radiation scattering study

Lupane-type pentacyclic triterpenes (lupeol, betulin, and betulinic acid) are natural products isolated from various plant sources. The terpenes exhibit a vast spectrum of biological activity and are applied in therapies for different diseases, among which the anticancer, anti-HIV, antihypercholesteremic, and antiinflammatory are the most promising. These chemicals possess amphiphilic structure and were proved to interact strongly with biomembranes, which can be the key stage in their mechanism of action. In our studies, we applied Langmuir monolayers as versatile models of biomembranes. It turned out that the three investigated terpenes are capable of stable monolayer formation; however, these monolayers differ profoundly regarding their physicochemical characteristics. In our research, we applied the Langmuir technique (surface pressure-mean molecular area (π-A) isotherm registration) coupled with Brewster angle microscopy (BAM), but the main focus was on the synchrotron radiation scattering method, grazing incidence X-ray diffraction (GIXD), which provides information on the amphiphilic molecule ordering in the angstr?m scale. It was proved that all the investigated terpenes form crystalline phases in their monolayers. In the case of lupeol, only the closely packed upright phase was observed, whereas for betulin and betulinic acid, the phase situation was more complex. Betulinic acid molecules can be organized in an upright phase, which is crystalline, and in a tilted phase, which is amorphous. The betulin film is a conglomerate of an upright crystalline monolayer phase, tilted amorphous monolayer phase, and a crystalline tilted bilayer. In our paper, we discuss the factors leading to the formation of the observed phases and the implications of our results to the therapeutic applications of the native lupane-type triterpenes.     

Influence of substituents on positron annihilation in styrene copolymers

Results of angular correlation of annihilation radiation (ACAR) and positron annihilation lifetime (PAL) measurements are presented for five styrene copolymers: poly(co-styrene-phenylmaleimide) and its three derivatives with chlorine as well as for one with the OH group substituted at the benzene ring. It occurs that the chlorine substituted at three different positions at the benzene ring poly(co-styrene-o (or-m,-p)-chlorophenylmaleimide) inhibits the formation of the positronium to different extent. The greatest effect is observed in case of the chlorine atom substituted at the benzene ring at the ortho-position towards the nitrogen atom. The two long lifetimes (₃ and ₄) observed in the lifetime spectra are connected with the bimodal distributions of the free volume radius in the samples.     

Influence of hydrostatic pressure on the phase transition in Ni(NH3)6I2: EPR studies

Electron paramagnetic resonance techniques are used to determine the phase transition temperature T_c of Ni(NH₃)₆I₂ as a function of hydrostatic pressure. The hydrostatic pressure causes T_c to increase and the value of the pressure coefficient dT_c/dp is (10 ± 2) K/GPa. T_c and dT_c/dp for hexammine halides is calculated on the basis of the “rigid-sphere model” and good agreement with the experimental data is obtained.     

Estimation of the breakthrough volume of selected steroids for C‐18 solid‐phase extraction sorbent using retention data from micro‐thin layer chromatography

SPE method is a very popular technique, and is commonly used for the prepurification, concentration, and isolation of different organic compounds from variable matrices. In this work, the optimization of SPE process was carried out. The breakthrough volume of solid sorbents based on octadecylsilane was determined and three methods were compared: (1) calculation one – the breakthrough volume was calculated using retention factor k determined with micro‐TLC method, frontal analysis – (2) breakthrough volume was determined as volume of whole elution peak, and (3) breakthrough volume was determined as the center of peak gravity. For calculation method, the k values of key estrogens and progestogens were derived from the micro‐TLC experiment reported previously. By combining these three methods, we can point the start of elution, the maximum concentration of analyte in eluate, and the whole eluent volume, which is necessary to achieve an appropriate selectivity and high extraction recovery. Proposed calculation method allows to estimate the beginning of the steroid peak, when the analyte appears in the eluate flowing from the sorbent. Such observation advances the SPE optimization protocol that was described before and was based on the correlation between raw k_SPE and k_micro‐TLC data.     

Two-photon absorption properties of two-dimensional π-conjugated chromophores: combined experimental and theoretical study

The two-photon absorption (TPA) properties of four TPEB [tetrakis(phenylethynyl)benzene] derivatives (TD, para, ortho, and meta) with different donor/acceptor substitution patterns have been investigated experimentally by the femtosecond open-aperture Z-scan method and theoretically by the time-dependent density-functional theory (TDDFT) method. The four compounds show relatively large TPA cross sections, and the all-donor substituted species (TD) displays the largest TPA cross-section σ(2) = 520 ± 30 GM. On the basis of the calculated electronic structure, TD shows no TPA band in the lower energy region of the spectrum because the transition density is concentrated on particular transitions due to the high symmetry of the molecular structure. The centrosymmetric donor-acceptor TPEB para shows excitations resulting from transitions centered on D-π-D and A-π-A moieties, as well as transition between the D-π-D and A-π-A moieties; this accounts for the broad nature of the TPA bands for this compound. Calculations for two noncentrosymmetric TPEBs (ortho and meta) reveal that the diminished TPA intensities of higher-energy bands result from destructive interference between the dipolar and three-state terms. The molecular orbitals (MOs) of the TPEBs are derivable with linear combinations of the MOs of the two crossing BPEB [bis(phenylethynyl)benzene] derivatives. Overall, the characteristics of the experimental spectra are well-described based on the theoretical analysis.     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Viscoelastic properties and morphology of dicyanate ester/epoxy co-polymers modified with polysiloxane and butadiene–acrylonitrile rubbers

Dynamic mechanical analysis was conducted on specimens prepared from cyanate ester (CE) and epoxy (EP) resins cured together at various mass compositions. Increase of amount of epoxy resin in composition was shown to have a disadvantageous effect on glass transition temperature (T _g). It was shown that post-curing procedure was needed to produce a polymer matrix with a single glass transition relaxation, but increase in post-cure temperature up to 250 °C resulted in slight reduction in T _g for epoxy/cyanate copolymers. TG results proved that the presence of epoxy resin reduces thermal stability of the cyanate/epoxy materials. The neat CE and EP/CE systems containing 30 wt% of epoxy resin were modified using epoxy-terminated butadiene–acrylonitrile rubber (ETBN) and polysiloxane core–shell elastomer (PS). The scanning electron microscopy (SEM) results showed the existence of second phase of ETBN and PS modifiers. Only in the case of EP/CE composition modified with ETBN, well-dispersed second phase domains were observed. Analysis of SEM images for other CE- and EP/CE-modified systems revealed the formation of spherical aggregates.     

pH gradient high-performance liquid chromatography: theory and applications

pH gradient high-performance liquid chromatography (HPLC) is a method of reversed-phase high-performance liquid chromatography suitable for ionogenic substances. It consists in programmed increase during the chromatographic process of the eluting strength of eluent with respect to the analytes separated. On the analogy of the conventional organic modifier gradient reversed-phase HPLC, in the pH gradient approach the eluting strength of the mobile phase increases due to its changing pH: increasing in case of acids or decreasing in case of bases. At the same time the content of organic modifier remains constant. A theory of the pH gradient HPLC has been elaborated. The resulting mathematical model is easily manageable. Its ability to predict changes in retention and separation of analytes following the changes in chromatographic conditions is demonstrated. The pH gradient method is uniquely suitable to determine pKa values of analytes. An equation is presented allowing to calculate pKa values basing on appropriate retention data. The effects on pKa are discussed of the concentration of methanol in the mobile phase. The RP HPLC-derived pKa data correlate to the reference pKa values (w(w)pKa) but are not identical. That may be explained by the effects on the chromatographically determined pKa of the specific interactions of analytes with stationary phases. The proposed pH gradient RP HPLC procedure offers a fast and convenient means to get comparable acidity parameters for larger series of compounds, like drug candidates, also when the analytes are available only in minute amounts and/or as complex mixtures.