High-throughput capillary electrophoretic method for determination of total aminothiols in plasma and urine.

Increased interest in the analysis of aminothiols in body fluids during the last years results in a request for high-throughput analytical methods for their determination. We report here a novel, high-throughput method for the determination of total concentrations of biogenous aminothiols - homocysteine, cysteine, glutathione, cysteinylglycine, gamma-glutamylcysteine, and of penicilamine, mercaptopropionylglycine, and cysteamine, three compounds used to treat disorders of aminothiol metabolism in plasma and urine. Samples were reduced with tris(carboxyethyl)phosphine and labeled with 5-(bromomethyl)fluorescein. Capillary electrophoretic separations were performed in 60 mmol/L borate - 15 mmol/L sodium dodecyl sulfate - 2-amino-2-methyl-1-propanol, pH 10.0, with laser-induced fluorescence detection. Analysis time was less than 2 min. The assay is linear (r > 0.999) up to 500 micromol/L. Reproducibilities of migration times (coefficient of variation, CV) were < 0.5%. Interassay repeatabilities (CV, n = 10) were 5.08% and 6.09% for 5 micromol/L addition of homocysteine and 0.60% and 3.78% for 100 micromol/L addition of cysteine in plasma and urine, respectively. Recovery values were within 94-106% and sensitivity was better than 0.19 micromol/L for all analyzed compounds. Results agreed well with a standard high-performance liquid chromatography (HPLC) method. The diagnostic usefulness of the method has been proven on 79 samples of cystinuric patients and 12 samples of homocystinuric patients. We report here a novel method for the determination of aminothiols in body fluids by capillary electrophoresis (CE). Determination is fast and sensitive enough for diagnostic purposes.     

Iminodiacetic acid functionalised monolithic silica chelating ion exchanger for rapid determination of alkaline earth metal ions in high ionic strength samples

Iminodiacetic acid has been covalently bonded to a bare silica monolith to produce the first reported high-performance monolithic chelating ion exchange column. Using the new column, separation and determination of traces of alkaline earth metal ions (low ppm) in high ionic strength samples (up to 2 M NaCl and KCl brines), could be achieved in under 40 s. At an eluent flow rate of 4 mL min(-1) retention time precision was < 1.2% (n = 9) for Mg(II) and Ca(II), with detector linearity (n = 5) over the range 2-10 mg L(-1) of between R2 = 0.985 and R2 = 0.995. In 1 M KCl and NaCl brine samples, detection limits of 0.2 mg L(-1) were possible.     

Direct continuous supercritical fluid extraction as a novel method of wine analysis. Comparison with conventional indirect extraction and implications for wine variety identification

Direct supercritical fluid extraction (SFE) of wines with carbon dioxide was compared to SFE of the sorbent used for solid-phase extraction of the same wine samples (SPE-SFE). Compared to SPE-SFE, the direct SFE results in amore specific and representative gas chromatographic fingerprint of the wine sample. The multivariate statistical processing of the direct SFE-GC data provides a clear-cut and sharp discrimination among the individual wine varieties while the discrimination based on the SPE-SFE-GC data is relatively poor. This finding reflects the adverse effects of additional analyte-sorbent interactions and sorption/desorption steps involved in SPE-SFE.     

The layered structure of poly­[[di‐μ‐chloro‐bis­[chloro(2‐ethyl­tetrazole‐κN4)copper(II)]]‐di‐μ‐2‐ethyl­tetrazole‐κ2N1:N4]

In the polymeric title complex, [CuCl₂(C₃H₆N₄)₂]_n, there are two ligands in the asymmetric unit. The Cu atom adopts an elongated octahedral geometry, with two 2‐ethyl­tetrazole ligands [Cu—N = 2.0037 (16) and 2.0136 (16) Å] and two Cl atoms [Cu—Cl = 2.2595 (6) and 2.2796 (6) Å] in equatorial positions. A Cl atom and a symmetry‐related 2‐ethyl­tetrazole mol­ecule [Cu—Cl = 2.8845 (8) Å and Cu—N = 2.851 (2) Å] lie in the axial positions of the octahedron. One of the two 2‐­ethyltetrazole ligands of the asymmetric unit exhibits bidentate binding to two Cu atoms through two N atoms of the tetrazole ring, whereas the other ligand is coordinated in a monodentate fashion via one tetrazole N atom. The Cu‐atom octahedra form dimer entities by sharing edges with equatorial and axial Cl atoms. The dimers are linked together through the 2‐ethyl­tetrazole ligands to form one‐dimensional polymeric zigzag chains extending along the b axis. The chains are connected into infinite layers parallel to the (10) plane via the 2‐ethyl­tetrazole ligands.     

Segmentation of Heteropolymer Sequences Specifying Subsequences with Different Composition and Statistical Properties

We have studied the segmentation of two‐letter AB heterosequences composed of subsequences with different composition and distribution of A and B monomer units along the chain. Our approach is based on the segmentation function S(k) introduced in the present work and on the Jensen–Shannon divergence measure determined with respect to the probabilities of the lengths of uniform blocks of A and B monomer units. It is shown that the function S(k) is extremely sensitive to the sequence statistics. Even visual analysis of S(k) allows judgment on some features of sequence statistics. In particular, function S(k) is constant for random copolymers, it is an oscillating function for random block copolymers and shows monotonic growth up to some constant value for proteinlike copolymers. However, due to significant fluctuations observed for short sequences, the function S(k) can be effectively used only for segmentation of a heterosequence composed of very long subsequences. On the other hand, we find that the Jensen–Shannon divergence measure does not allow one to judge the type of statistics, but is extremely efficient for segmentation of a heterosequence. Therefore, the two introduced functions, being mutually complementary, provide an effective approach for recognizing and segmentation of heterosequences. As an example, the methods developed are applied for concatenating sequences of different proteins.

Segmentation function S(k, l, x) as a function of parameter k and starting number x of “window” for a sequence composed of elastin and ribonuclease sequences.     

Kissinger equation versus glass transition phenomenology

The applicability of the Kissinger equation for the evaluation of apparent activation energy corresponding to glass transition kinetics is examined. Theoretically simulated data based on the generally accepted Tool–Narayanaswamy–Moynihan model were used to represent relevant cases of structural relaxation behavior. The values of the apparent activation energy determined by the Kissinger equation were, despite the linearity of the dependencies, in major disagreement with the original values of ?h ^* used for the simulation of the source data. Furthermore, a large dependence of the ?h _Kis ^* evaluation (performed using the Kissinger equation) on the thermal history of the glass was found. The latter represents an unacceptable systematic error in the methodology, implying the incorrectness of the Kissinger equation usage for the evaluation of “glass transition activation energy”. This study addresses the currently widespread (incorrect) usage of the Kissinger equation for the above-mentioned purpose.     

H-quadrupolar coupling-based analysis of stereochemical and regiochemical memory in the Pd-catalysed allylic alkylation of iso-cinnamyl type substrates employing the chiral monophosphine ligands ‘MOP’ and ‘MAP’

The reaction of iso-cinnamyl acetate with NaC(Me)(CO₂Me)₂, catalysed by Pd-‘MOP’ (MOP=2-methoxy-2′-diphenylphosphino-1,1′-binaphthalene) is known to proceed with a regiochemical memory effect that results in the predominant generation of the branched alkylation product. The analogous reaction employing ‘MAP’ as ligand (MAP=2-N,N-dimethylamino-2′-diphenylphosphino-1,1′-binaphthalene) proceeds with ‘normal’ regioselectivity to generate predominantly the linear isomer of product. A ²H-NMR based analysis, employing quadrupolar coupling in a chiral liquid crystal matrix, has been developed to facilitate the simultaneous study of the regiochemical and stereochemical outcome of the reaction of both enantiomers of iso-cinnamyl ester substrates in ²H-labelled but racemic samples. The analysis allows the comparison of relative rates of two competing isomerisation processes occurring in the π-allyl intermediates in the Pd-catalysed reaction, one of which facilitates asymmetric induction, the other resulting in loss of regiochemical memory. It is demonstrated that the two processes are partially coupled and that this then limits the attainment of high global enantiomeric excess in the branched product to reactions that proceed with low regiochemical retention. A key factor for the observation of high regiochemical memory is found to be the nucleophilicity of the malonate anion and the electrophilicity of the Pd-π-allyl intermediate with reduction in the reactivity of either partner resulting in the onset of substantial loss of memory.     

Mixed valence in YBaFe(2)O(5)

YBaFe(2)O(5) has been synthesized by heating a nanoscale citrate precursor in a carefully controlled reducing environment. Successful synthesis of a single-phase sample can only be achieved in a narrow window of oxygen partial pressures and temperatures. YBaFe(2)O(5) adopts an oxygen-deficient perovskite-type structure, which contains double layers of corner sharing FeO(5) square pyramids separated by Y(3+) ions. At T(N) congruent with 430 K, tetragonal (P4/mmm) and paramagnetic YBaFe(2)O(5) orders antiferromagnetically (AFM) experiencing a slight orthorhombic distortion (Pmmm). Around this temperature, it can be characterized as a class-III mixed valence (MV) compound, where all iron atoms exist as equivalent MV Fe(2.5+) ions. The magnetic structure is characterized by AFM Fe-O-Fe superexchange coupling within the double layers and a ferromagnetic Fe-Fe direct-exchange coupling between neighboring double layers. Upon cooling below approximately 335 K, a premonitory charge ordering (2Fe(2.5+) --> Fe(2.5+delta) + Fe(2.5)(-delta)) into a class-II MV phase takes place. This transition is detected by differential scanning calorimetry, but powder diffraction techniques fail to detect any volume change or a long-range structural order. At approximately 308 K, a complete charge ordering (2Fe(2.5+) --> Fe(2+) + Fe(3+)) into a class-I MV compound takes place. This charge localization triggers a number of changes in the crystal, magnetic, and electronic structure of YBaFe(2)O(5). The magnetic structure rearranges to a G-type AFM structure, where both the Fe-O-Fe superexchange and the Fe-Fe direct-exchange couplings are antiferromagnetic. The crystal structure rearranges (Pmma) to accommodate alternating chains of Fe(2+) and Fe(3+) running along b and an unexpectedly large cooperative Jahn-Teller distortion about the high-spin Fe(2+) ions. This order of charges does not fulfill the Anderson condition, and it rather corresponds to an ordering of doubly occupied Fe(2+) d(xz) orbitals. Comparisons with YBaMn(2)O(5) and YBaCo(2)O(5) are made to highlight the impact of changing the d-electron count.