The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Stereoselective conjugate addition of benzyl phenylsulfonyl carbanions to enoates derived from d-mannitol

The conjugate addition of benzylic phenylsulfonyl carbanions (2a'-d') to enoates derived from d-(+)-mannitol (E- or Z-1a-c) was studied using THF and THF/HMPA as solvent. Under kinetic conditions (-78 degrees C), enoate E-1a,b led to a mixture of syn-(R,S) and anti-(S,S) adducts (55/45), and syn-(R,S) adducts were the main product obtained ( approximately 90/10) from enoate Z-1a. Under thermodynamic conditions (-78 degrees C to room temperature) syn-(R,S) adducts were also preferentially formed ( approximately 90/10), despite the geometry at the double bond in the acceptor. Enoate 1c (E/Z = 57/43), bearing an additional benzyl group at the alpha-position, also reacted with carbanions 2'a,b, under thermodynamic conditions, leading to syn-adducts in excellent de (control at the three newly generated stereogenic centers). The adducts were quantitatively transformed into the corresponding beta-gamma-disubstituted gamma-butyrolactones and alpha,beta,gamma-trisubstituted gamma-butyrolactones. (1)H NMR studies (NOE and J-coupling) of these lactones allowed us to determine their configuration at the newly generated chiral centers. The reduction of the C-S bond in adducts syn-(R,S) with Na/Hg, followed by treatment of the resulting products in aqueous acid media, led to enantioenriched beta-benzyl-gamma-hydroxymethyl-gamma-butyrolactones. The conformational equilibrium of enoates E- and Z-1b was evaluated by theoretical calculations (ab initio, MP2/6-31G), and a mechanistic rationale was proposed to explain the observed stereoselectivities.     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.     

Methylation of Chitosan with Iodomethane: Effect of Reaction Conditions on Chemoselectivity and Degree of Substitution

N,N,N‐trimethylchitosan (TMC) was prepared by reacting purified chitosan with iodomethane, in the presence of sodium hydroxide, water and sodium iodide, at room temperature. The reaction medium was N‐methyl‐2‐pyrrolidone. Different samples of TMC were obtained by adding to the reaction medium a fixed volume (5.5 mL) of aqueous NaOH solutions at different concentrations (15, 20, 30 and 40 wt.‐%) and carrying out the reactions for 9 or 24 h. The features observed in the ¹H and ¹³C NMR spectra of these chitosan derivatives, in respect of the chemical shift, number and relative intensity of the signals, depended strongly on the excess of NaOH and H₃CI added to the reaction medium, but when the lowest excess was employed, the characteristics of the derivative were not affected by the reaction time to the same extent. The average degree of quaternization of these N‐methylated derivatives of chitosan ranged from 10.5% to 44.8%, according to the reaction conditions. Increasing the excess of NaOH, in reactions carried out for 9 h, resulted in TMC samples with progressively higher content of trimethylated sites however, the reaction yields were correspondingly lower and O‐alkylation was favored in these cases.

¹H NMR spectrum of sample [A_X]^24h dissolved in D₂O (C_p = 10 g/L).     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

Structure and magnetism of VnBz(n+1) sandwich clusters

Results on structural, energetic, electronic, and magnetic properties of linear sandwich VnBzn+1 clusters obtained using high-accuracy density functional computations are presented and analyzed. Energetically close-lying configurations and states of different spin-multiplicities are identified. The computed characteristics are in good agreement with the available experimental data. The computations predict that the most stable forms of the clusters in the size range n >/= 4 are chiral. This feature, combined with the magnetism of these systems, makes them of potential importance as building blocks of nanosystems with coupled optical and magnetic functionalities.     

Modification of the luminescence properties of an Europium(III) Tris(β-diketonate) Complex by Inclusion in γ-cyclodextrin and 2,3,6-trimethyl-γ-cyclodextrin

A 1:1 inclusion compound between octakis(2,3,6-tri-O-methyl)-γ-cyclodextrin (TRIMEG) and the chelate complex Eu(NTA)₃·2H₂O (NTA=1-(2-naphthoyl)-3,3,3-trifluoroacetonate) was prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and photoluminescence spectroscopy. The results were compared with those obtained for the corresponding native γ-CD adduct. Excitation and emission spectra were measured, and the lifetimes were determined for the Eu³⁺ first excited state (⁵D₀). The results indicate the presence of only one low-symmetry environment for the Eu³⁺ cations in the inclusion compounds. Encapsulation of the Europium complex in the two CDs increases the quantum efficiency of the ligand-to-metal energy transfer pathway, but the efficiency of the Eu³⁺ sensitization was significantly higher with TRIMEG as the host molecule. This may be related with the observation that the two hosts appear to have different influences on the Eu³⁺ coordination environments for the guest molecule.     

Quantitative vs. qualitative approaches to the electronic structure of solids

The usefulness of qualitative and quantitative theoretical approaches in solid state chemistry is discussed by considering three different types of problems: (a) the distribution of boron and carbon atoms in MB₂C₂ (M=Ca, La, etc.) phases, (b) the band structure and Fermi surface of low-dimensional transition metal oxides and bronzes, and (c) the correlation between the crystal and electronic structure of the ternary nitride Ca₂AuN.     

SOME PRELIMINARY INFORMATION ON SYNDIOTACTIC POLYSTYRENE CATALYSTS

Syndiotactic specific polymerization of styrene has been investigated by ~(13)C NMR analysis and isotopic laelling methods. The value of the activation energy involved in the steric control has been determined. Some information of the number of the active sites and on the life of the catalysts is reported.     

Electron transfer in proteins: nonorthogonal projections onto donor-acceptor subspace of the Hilbert space

We develop nonorthogonal projectors, called L?wdin projectors, to construct an effective donor-acceptor system composed of localized donor (D) and acceptor (A) states of a long-distance electron transfer problem. When these states have a nonvanishing overlap with the bridge states these projectors are non-Hermitian and there are various possible effective two-level systems that can be built. We show how these can be constructed directly from the Schr?dinger or Dyson equation projected onto the D-A subspace of the Hilbert space and explore these equations to determine the connection between Hamiltonian and Green function partitioning. We illustrate the use of these effective two-level systems in estimating the electron transfer rate in the context of a simple electron transfer model.