Integrated optical temporal Fourier transformer based on a chirped Bragg grating waveguide

We experimentally demonstrate the first integrated temporal Fourier transformer based on a linearly chirped Bragg grating waveguide written in silica glass with a femtosecond laser. The operation is based on mapping the energy spectrum of the input optical signal to the output temporal waveform by making use of first-order chromatic dispersion. The device operates in reflection, has a bandwidth of 10 nm, and can be used for incident temporal waveforms as long as 20 ps. Experimental results, obtained through both temporal oscilloscope traces and Fourier transform spectral interferometry, display a successful Fourier transformation of in-phase and out-of-phase pairs of input optical pulses, and demonstrate the correct functionality of the device for both amplitude and phase of the temporal output.     

Linear calibration procedure for the phase-to-height relationship in phase measurement profilometry

Calibration of the relationship between height and phase is of uttermost importance to perform accurate 3D measurements in phase measurement profilometry. This work reports a different approach to this problem by first looking at the analytical expression for this relationship and determining the regime spanned by the fringe analysis method. The conclusions thus ascertained, amply justify confronting the analytical expression with a simple normalization procedure of the experimental data, with a remarkable matching between both results. In light of this, a linear calibration procedure with just one plane is proposed and verified experimentally.     

Power extraction using flow-induced vibration of a circular cylinder placed near another fixed cylinder

We conducted an experiment in a towing tank to investigate the performance of an energy extraction system using the flow-induced vibration of a circular cylinder. This experiment tested three different cases involving the following arrangements of cylinder(s) of identical diameter: the upstream fixed–downstream movable arrangement (case F); the upstream movable–downstream fixed arrangement (case R); and a movable isolated cylinder (case I). In cases F and R, the separation distance (ratio of the distance between the centers of the two cylinders to their diameters) is fixed at 1.30. Measurement results show that while cases F and I generate vortex-induced vibration (VIV) resonance responses, case R yields wake-induced vibration (WIV) at reduced velocity over 9.0, which is significantly larger than that of the VIV response, leading to the induction of higher electronic power in a generator. Accordingly, primary energy conversion efficiency is higher in the case involving WIV.     

New insights into the extraction of uranium(VI) by an N,N-dialkylamide

This paper presents the methodology developed in order to thoroughly characterise a solvent extraction system containing high solute concentrations. The chemical system selected is N,N-(2-ethylhexyl)isobutyramide (DEHiBA) diluted in one alkane with increasing concentration of uranium(VI). Combining experiments with theoretical calculations allowed a deeper understanding of the extraction mechanism. A thermodynamic study was performed by the classical van't Hoff method and also by direct calorimetry to provide the enthalpies of extraction and specific heats. Dedicated methods like vapour pressure osmometry and electrospray ionisation mass spectrometry analysis provide information about the stoichiometry of the extracted species. Spectroscopic investigations with ultraviolet–visible and Fourier transform infrared probed the uranium coordination. Finally, a combination of molecular dynamics simulations, and small and wide-angle X-ray scattering experiments investigated the organisation in the organic phase beyond the molecular scale. It was shown that the high concentrations of uranium extracted have no influence on the stoichiometry of the complexes and the coordination of uranium in the inner sphere. The thermodynamic properties related to the extraction process and obtained with a fine consideration of the activity coefficients showed to be the same as those found with trace concentration. However, an unexpected organisation beyond the molecular scale was observed with an important role of nitrates as bridging ligands which could explain some physico-chemical properties. This approach could be applied to other chemical systems (other N,N-dialkylamides or other cations) to identify the origin of the different affinities between ligands and the difference of selectivity between cations.     

Determination of cobalt marker in cow ruminal fluid by EDXRF and SRTXRF

This article describes a comparison of conventional energy‐dispersive X‐ray fluorescence (EDXRF) and synchrotron radiation total‐reflection X‐ray fluorescence (SRTXRF) for Co determination in ruminal fluid from Holstein cow. This element is used as marker for animal nutrition studies. For EDXRF, 200 µl of the sample were dried on 6.35 µm Mylar film at 60 °C. The excitation was carried out using an X‐ray tube with Mo target and Zr filter operated at 30 kV/20 mA. For SRTXRF, 10 µl of the sample were pipetted on a Lucite carrier and dried at 60 °C. In both the techniques, Ga was used as internal standard and the acquisition time was 200 s. The trueness of both techniques was evaluated through the standard addition method, the recoveries obtained by SRTXRF and EDXRF were 76 and 99%, and the limits of detection, 13 and 240 µg l^?1, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

The hoard of Beçin—non-destructive analysis of the silver coins

We report the results of an analytical investigation on 416 silver-copper coins stemming from the Ottoman Empire (end of 16th and beginning of 17th centuries), using synchrotron micro X-ray fluorescence analysis (SRXRF). In the past, analyses had already been conducted with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy with energy dispersive X-ray spectrometry (SEM/EDX) and proton induced X-ray emission spectroscopy (PIXE). With this combination of techniques it was possible to confirm the fineness of the coinage as well as to study the provenance of the alloy used for the coins.     

Probing quantum-vacuum geometrical effects with cold atoms

The lateral Casimir-Polder force between an atom and a corrugated surface should allow one to study experimentally nontrivial geometrical effects in the electromagnetic quantum vacuum. Here, we derive the theoretical expression of this force in the scattering approach. We show that large corrections to the "proximity force approximation" could be measured using present-day technology with a Bose-Einstein condensate used as a vacuum field sensor.     

A contribution to the global formulation of the higher-order Poincaré-Cartan form

The global formulation of the higher-order Poincaré-Cartan form for Lagrangian field theories in the calculus of variations is re-examined in terms of the theory of lifts of tensor fields on a manifold to its higher-order prolongated jet bundles.Partially supported by CNPq, Brazil, Proc. MA 30.1115/79.     

Differential Simplicity in Polynomial Rings and Algebraic Independence of Power Series

Let k be a field of characteristic zero, f(X,Y), g(X,Y)k[X,Y],g(X,Y) (X,Y) and d:=g(X,Y)/X + f(X,Y)/Y. A connection is establishedbetween the d-simplicity of the local ring k[X,Y]_(X,Y) and thetranscendency of the solution in tk[[t]] of the algebraic differentialequation g(t,y(t))·(/t)y(t)+f(t,y(t)). This connectionis used to obtain some interesting results in the theory ofthe formal power series and to construct new examples of differentiallysimple rings.