Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Relevance of Reflection in Static and Dynamic Light Scattering Experiments

Using a monodisperse PMMA dispersion, it was shown that light reflection at the sample cuvette walls may greatly influence the results of both static (SLS) and dynamic (DLS) light scattering experiments. Considering SLS, this reflection phenomenon mostly causes an overestimation of the scattered intensity at high scattering angles, which may give rise to the emergence of an additional, artificial peak in the lower region of the particle size distribution. On the other hand, the influcence of reflection on DLS measurements was shown to be particularly important in the upper region of the particle size distribution. The experimentally observed phenomena were explained from the basic principles of both particle sizing methods. Finally, it was shown that the disturbing effect of reflection could be avoided by modifying either the hardware or the software of the static and dynamic light scattering technique.     

Current trends in muonium chemistry

As “rapporteur” for the papers submitted to this conference in the general area of muonium chemistry, I briefly review the major developments since μSR86, and attempt to show how the papers presented at μSR90 relate to each other and work published in the intervening years. Some topics are discussed in more detail than others, reflecting my own interests and views on what is of current importance. Nevertheless, I try to cover all current research in muonium chemistry. The major areas are: early events following muon thermalization, including subsequent loss of muon polarization (the “missing fraction”); molecular structure and dynamics, primarily of muonium-substituted free radicals: and reaction kinetics.     

Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

A Network Simulation of High-congestion Road-traffic Flows in Cities with Marine Container Terminals

Port cities where marine cargo terminals are located are generally near urban areas characterized by high-congestion road traffic. Changes in cargo traffic volumes into a marine terminal, or in the surrounding traffic arteries, which carry this traffic, can significantly affect the terminal's operations. Conversely, activity at the terminal can have an impact on the traffic levels and congestion for a considerable distance from the terminal. This paper demonstrates a methodology useful for studying the impact of road traffic flows on marine container terminals located in highly congested areas. This model was developed at the request of the Virginia Center for World Trade and was used to answer three planning questions in the port of Hampton Roads, Virginia, USA-what would be the impact of: opening a new section of interstate highway, a projected doubling of container traffic at one terminal, and a daily unit train in the vicinity of another terminal. The problem was made more challenging by limited data-collection funds. None the less, the model was deemed valid by a panel of traffic experts and officials from several major state and private agencies involved in marine traffic management. The model results were subsequently a factor in two major decisions related to terminal management.     

Bases,spanning sets,and the axiom of choice

Two theorems are proved: First that the statement “there exists a field F such that for every vector space over F, every generating set contains a basis” implies the axiom of choice. This generalizes theorems of Halpern, Blass, and Keremedis. Secondly, we prove that the assertion that every vector space over ?₂ has a basis implies that every well‐ordered collection of two‐element sets has a choice function. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)