On-chip generation of microbubbles as a practical technology for manufacturing contrast agents for ultrasonic imaging

This paper presents a new manufacturing method to generate monodisperse microbubble contrast agents with polydispersity index (sigma) values of <2% through microfluidic flow-focusing. Micron-sized lipid shell-based perfluorocarbon (PFC) gas microbubbles for use as ultrasound contrast agents were produced using this method. The poly(dimethylsiloxane) (PDMS)-based devices feature expanding nozzle geometry with a 7 microm orifice width, and are robust enough for consistent production of microbubbles with runtimes lasting several hours. With high-speed imaging, we characterized relationships between channel geometry, liquid flow rate Q, and gas pressure P in controlling bubble sizes. By a simple optimization of the channel geometry and Q and P, bubbles with a mean diameter of <5 microm can be obtained, ideal for various ultrasonic imaging applications. This method demonstrates the potential of microfluidics as an efficient means for custom-designing ultrasound contrast agents with precise size distributions, different gas compositions and new shell materials for stabilization, and for future targeted imaging and therapeutic applications.     

High-throughput screening of enzyme inhibition using an inhibitor gradient generated in a microchannel

A new rapid microfluidic method for measuring enzyme inhibition is presented. The assay relies upon the creation of a uniform concentration of substrate and a microfluidically generated concentration gradient of inhibitor using a single microchannel and a single initial inhibitor concentration. The IC(50) values of two enzyme inhibitors were determined using the new technique and validated using a conventional microtiter plate assay. Using both experimental and computational simulation techniques, the assay was shown to be sensitive to inhibitor potency and the distribution of inhibitor in the system. The method has the potential to be more accurate than conventional methods because of the comparatively large amount of data that may be collected. Recommendations for use of the assay are provided, including its use for high-throughput screening in drug discovery and general use in measurement of enzyme inhibition.     

Effect of capillary condensation on friction force and adhesion

Friction force measurements have been conducted with a colloid probe on mica and silica (both hydrophilic and hydrophobized) after long (24 h) exposure to high-humidity air. Adhesion and friction measurements have also been performed on cellulose substrates. The long exposure to high humidity led to a large hysteresis between loading and unloading in the friction measurements with separation occurring at large negative applied loads. The large hysteresis in the friction-load relationship is attributed to a contact area hysteresis of the capillary condensate which built up during loading and did not evaporate during the unloading regime. The magnitude of the friction force varied dramatically between substrates and was lowest on the mica substrate and highest on the hydrophilic silica substrate, with the hydrophobized silica and cellulose being intermediate. The adhesion due to capillary forces on cellulose was small compared to that on the other substrates, due to the greater roughness of these surfaces.     

Osmotically induced morphological changes of extruded dioctadecyldimethylammonium chloride (DODAC) dispersions

Extruded vesicles, which are often used as models for living cells, can change their morphology when they are diluted into a hyperosmotic medium. Different morphological changes were observed with extruded dioctadecyldimethylammonium chloride (DODAC) vesicles after dilution with a nonionic (sucrose) and ionic (CaCl2) osmotic agent above and below the gel-to-liquid crystalline transition temperature. By means of turbidimetry, dynamic light scattering, and cryo-transmission electron microscopy, it was seen that the vesicles only deflated when they were in the gel state, whereas in the liquid crystalline state, an ionic osmotic agent could induce twinning of the vesicles, reminiscent to endocytosis. The latter could occur as a result of the combined effects of reduced repulsion, local dehydration, and reduced bending rigidity induced by the ionic agent.     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Forward and backward pericyclic photochemical reactions have intermediates in common, yet cyclobutenes break the rules.

Photochemical pericyclic reactions are believed to proceed via a so-called pericyclic minimum on the lowest excited potential surface (S(1)), which is common to both the forward and backward reactions. Such a common intermediate has never been directly detected. The photointerconversion of 1,3-butadiene and cyclobutene is the prevailing prototype for such reactions, yet only diene ring closure proceeds with the stereospecificity that the Woodward-Hoffmann rules predict. This contrast seems to exclude a common intermediate. Using ultrafast spectroscopy, we show that the excited states of two cyclobutene/diene isomeric pairs are linked by not one, but by two common minima, p* and ct*. Starting from the diene side (cyclohepta-1,3-diene and cycloocta-1,3-diene), electrocyclic ring closure passes via the pericyclic minimum p*, whereas ct* is mainly responsible for cis-trans isomerization. Starting from the corresponding cyclobutenes (bicyclo[3.2.0]heptene-6 and bicyclo[4.2.0]octene-7), the forbidden isomer is formed from ct*. The path branches at the first (S(2)/S(1)) conical intersection towards p* and ct*. The fact that the energetically unfavorable ct* path can compete is ascribed to a dynamic effect: the momentum in C=C twist direction, acquired--such as in other olefins--in the Franck-Condon region of the cyclobutenes.     

Transitions in structure in oil-in-water emulsions as studied by diffusing wave spectroscopy

Transitions in structure of sodium caseinate stabilized emulsions were studied using conventional rheometry as well as diffusing wave spectroscopy (DWS). Structural differences were induced by different amounts of stabilizer, and transitions in structure were induced by acidification. Special attention was given to the sol-gel transition. In this study the criterion of the sol-gel transition being frequency independent was verified for emulsions using DWS. It was shown that this sol-gel transition did not correspond to the so-called ergodic-nonergodic transition. Differences, as a function of the pH, were found for emulsions containing different amounts of stabilizer. The emulsion droplets in an emulsion without extra stabilizer formed a continuous network upon acidification, while the droplets in emulsions with an excess of stabilizer formed a network of oil droplets at neutral pH. Upon acidification of the latter one, the initial network of oil droplets fell apart, and eventually a network of sodium caseinate, in which the oil droplets were embedded, was formed. This caused the appearance of two sol-gel transitions. The breaking of the initial network as well as the network formation of sodium caseinate in time was observed by DWS.     

The molecular structure of N-fluorobis(trifluoromethanesulfonyl)imide, NF(SO(2)CF(3))(2), as studied in the gas phase by electron diffraction restrained by ab initio calculations

The structure of N-fluorobis(trifluoromethylsulfonyl)imide, prepared by a relatively safe and easy method, has been determined by gas-phase electron diffraction (GED), employing the SARACEN method, with flexible restraints based on the MP2/6-311G* structure, and by X-ray crystallography at 150 K. The strongly electron-withdrawing CF(3) and SO(2)CF(3) groups make the C-S and N-S distances long, averaging 187.7(3) and 171.7(3) pm, respectively, in the gas phase. The gas consists of two conformers, one (75%) with a CF(3) group on each side of the SNS plane, one anti-periplanar and one syn-periplanar to the further N-S bond (ap, sp), and the other with both CF(3) groups on the same side, i.e. denoted ap, ap. These conformers have very different SNS angles, 126.9(9) degrees and 117.1(17) degrees respectively. In the crystal all molecules have the ap, sp conformation, with parameters similar to those found for this conformer in the gas phase.     

Synthesis of TiO(2)-PMMA nanocomposite: using methacrylic acid as a coupling agent

Inorganic-polymer nanocomposites are of significant interest for emerging materials due to their improved properties and unique combination of properties. Methacrylic acid (MA), a functionalization agent that can chemically link TiO2 nanomaterials (n-TiO2) and polymer matrix, was used to modify the surface of n-TiO2 using a Ti-carboxylic coordination bond. Then, the double bond in MA was copolymerized with methyl methacrylate (MMA) to form a n-TiO2-PMMA nanocomposite. The resulting n-TiO2-PMMA nanocomposite materials were characterized by using thermal analysis, electron microscopy, and elemental analysis. The dynamic mechanical properties (Young's and shear modulus) were measured using an ultrasonic pulse technique. The electron microscopy results showed a good distribution of the nanofillers in the polymer matrix. The glass transition temperature, thermal degradation temperature, and dynamic elastic moduli of the nanocomposites were shown to increase with an increase in the weight percentage of nanofibers in the composite. The resulting nanocomposites exhibited improved elastic properties and have potential application in dental composites and bone cements.