Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

The use of temporary tethers in the meta photocycloaddition reaction

The use of temporary tethers in facilitating meta photocycloaddition reactions between phenol and allyl alcohol derivatives has been investigated. The merits of silicon, carbonate and methylene acetal tethers were assessed, whilst considering strategies for the preparation of the natural products gymnomitrol and gelsemine. The photoadducts were epoxidised, and then subjected to acid catalysed fragmentation with concomitant cleavage of the tether. Depending on whether water or methanol was used during the fragmentation stage of the methylene tethers, the methylene group was either removed altogether or transformed into a MOM group.     

Ein allgemeiner Satz über die Integrirbarkeit von Functionen integrirbarer Functionen

Ohne ZusammenfassungAbgedruckt aus den Sitzungsberichten der math.-phys. Classe der k. b. Akadem. d. Wiss. zu München.     

Equivalence of inverse Sturm-Liouville problems with boundary conditions rationally dependent on the eigenparameter

Three inverse problems for a Sturm-Liouville boundary value problem −y″+qy=λy, y(0)cosα=y′(0)sinα and y′(1)=f(λ)y(1) are considered for rational f. It is shown that the Weyl m-function uniquely determines α, f, and q, and is in turn uniquely determined by either two spectra from different values of α or by the Prüfer angle. For this it is necessary to produce direct results, of independent interest, on asymptotics and oscillation.     

Search during decision making

Nearly four hundred non-routine organizational decisions were investigated to discover search approaches––determining the frequency of use and success of each search approach uncovered. A “search approach” is made up of a direction and a means to uncover solution ideas. Direction indicates desired results and it can be either implicit or explicit, with an explicit direction offering either a problem or a goal-like target. Solutions can be uncovered by opportunity, bargaining, and chance as well as by rational approaches. Defining a search approach as a direction coupled with a means of search, search approaches were linked with indicators of success, measured by the decision's adoption, value and timeliness, noting frequency. A rational, goal-directed, search approach was more apt to produce successful outcomes. Bargaining with stakeholders to uncover solutions was always combined some of the search approaches in this study, and this merger improved the prospects of success. Searches with an opportunistic or chance (emergent opportunity) features and rational searches with a problem target were more apt to produce unsuccessful outcomes. The means used to come up with a solution had less bearing on success than did the type of direction, with goal-directed searches leading to the best outcomes. Each search approach is discussed to reveal best practices and to offer suggestions to improve practice.     

tert‐Butyl (6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxo‐1,2,5,6‐tetra­hydropyridine‐1‐carboxyl­ate and tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxopiperidine‐1‐carboxyl­ate

X‐ray studies reveal that tert‐butyl (6S)‐6‐iso­butyl‐2,4‐dioxo­piperidine‐1‐carboxyl­ate occurs in the 4‐enol form, viz. tert‐butyl (6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo‐1,2,5,6‐tetra­hydropyri­dine‐1‐carboxyl­ate, C₁₄H₂₃NO₄, when crystals are grown from a mixture of di­chloro­methane and pentane, and has an axial orientation of the iso­butyl side chain at the 6‐position of the piperidine ring. Reduction of the keto functionality leads predominantly to the corresponding β‐hydroxy­lated δ‐lactam, tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo­piperidine‐1‐car­boxyl­ate, C₁₄H₂₅NO₄, with a cis configuration of the 4‐hydroxy and 6‐iso­butyl groups. The two compounds show similar molecular packing driven by strong O—H⋯O=C hydrogen bonds, leading to infinite chains in the crystal structure.     

Inhibitors of biotin biosynthesis as potential herbicides

Isosteric derivatives and analogues of the 7-keto-8-aminopelargonic acid (KAPA), 7,8-diaminopelargonic acid (DAPA) and desthiobiotin (DTB) vitamer intermediates involved in the biosynthetic pathway of biotin were prepared and evaluated as potential herbicides. The most active compound was desmethyl-KAPA which displayed a GR₅₀ (concentration of the active compound that causes a 50% growth inhibition) value of 8 ppm, where values <50 ppm are considered herbicidal. Other KAPA analogs where the terminal Me group was replaced by bulkier substituents such as Et, i-Pr and HOCH₂ showed moderate activity.     

The Orevkov invariant of an affine plane curve

We show that although the fundamental group of the complement of an algebraic affine plane curve is not easy to compute, it possesses a more accessible quotient, which we call the Orevkov invariant.