Hg2(OH)[BF4], the First Basic Mercurous Tetrafluoroborate

The first basic mercurous tetrafluoroborate, Hg₂(OH)[BF₄], was obtained through a synproportionation reaction of red mercuric oxide, HgO, and elemental mercury in a 35% solution of HBF₄ in water as colourless single crystals. The crystal structure (orthorhombic, Pbca, Z = 8, a = 985.0(1), b = 991.0(1), c = 1141.0(2) pm) contains [(HO)_1/2—Hg—Hg—(OH)_1/2]⁺ zig‐zag chains that are further connected via weak Hg—OH interchain interactions to layers between which the [BF₄]^— are located in an up and down fashion.     

Action of photoreactivating light on pyrimidine heteroadduct in bacteria

Abstract— In stationary-phase Escherichia coli B/r, photoreactivation (PR) at 313 nm of ultraviolet (u.v.) killing is inefficient compared with PR at 405 nm, and can be explained solely by photoenzymatic reversal of pyrimidine dimers. In Staphylococcus epidermidis, PR shows a maximum at 313 nm, suggesting that this organism shows the Type III PR proposed by Jagger et al.[5] for Streptomyces strains. Reversal of pyrimidine dimers is not sufficient to explain this PR. The mechanism of Type III PR remains unknown. With both S. epidermidis and E. coli B/r, the amount of uracil–thymine heteroadduct in DNA hydrolysates decreases if the cells are given a post-u.v. treatment at 313 nm, but no decrease is observed if the post-u.v. treatment is at 405 nm. The biological significance of this adduct and of its removal is not clear. It may play a role in Type III PR.     

THE EFFECTS OF HOST-CELL REACTIVATION ON ASSAY OF U.V.-IRRADIATED HAEMOPHILUS INFLUENZAE TRANSFORMING DNA

Abstract— The host cell reactivation (HCR) mechanism in Haemophilus influenzae cells is inhibited by sub-microgram concentrations of acriflavine (as is already known to be true for Escherichia coli ). Exposure of these cells to similar concentrations of the drug during bacterial transformation increases the apparent ultraviolet light (u.v.) sensitivity of previously irradiated transforming DNA, indicating a repair of this DNA after uptake by the cells under normal conditions. Repair is inhibited by applying acriflavine at any time up to one hour after competent cells contact the irradiated transforming DNA. The fraction of the u.v. damage repaired by HCR is very different for different genetic markers. Those markers which are most u.v. sensitive when assayed in the absence of acriflavine are most poorly repaired, suggesting that this is the reason for their higher sensitivity. For all markers the fraction of the damage repairable by in vitro photoreactivation is approximately constant, and strongly overlaps the damage repairable by HCR. The degree of HCR achieved can be altered by experimental treatment of the H. influenzae DNA prior to transformation. Thus treatment of irradiated DNA with an enzyme from Micrococcus lysodeikticus –known to attack u.v. damaged, but not undamaged DNA–prevents subsequent intracellular repair of the same u.v. lesions whose repair is inhibited by acriflavine. Similarly, partial replacement of the thymine in transforming DNA by 5-bromouracil (BU) strongly inhibits repair of subsequent u.v. damage. As in bacteriophage, the BU effect is relieved if the u.v. exposure occurs in the presence of cysteamine. It is clear that intracellular repair must be considered in interpreting experiments with u.v.-irradiated transforming DNA.     

Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Zum thermischen Verhalten von Li3MnO4. II [1, 2]. Über α- und β- Li2MnO3

Thermal Behaviour of Li₃MnO₄. II. α- and β-Li₂MnO₃ By thermal decomposition of Li₃MnO₄ we obtained two new forms of Li₂MnO₃: α-Li₂MnO₃ crystallizes due to Guinier-Simon photographs cubic face-centered with a = 4.09₂ Å, β-Li₂MnO₃ hexagonal with a = 4,93, c = 14.24 Å, c/a = 2.89. α-Li₂MnO₃ is paramagnetic with μ = 3,82 B.M. Below the Neel temperature (≈? 50 K) β-Li₂MnO₃ is antiferromagnetic. Effective Coordination Numbers, ECoN, are calculated and discussed.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

Quelques precisions sur les effets catalytiques des micelles cationiques hydroxylees

The alkaline hydrolysis of p-nitrophenyl acetate and of CH₃CO₂(CH₂)₂N⁺(CH₃)₂C₁₆H₃₃, Br^? was studied in the presence of micelles C₁₆H₃₃N⁺(CH₃)₂CH₂CH₂OH, Br^? and CTAB, C₁₆H₃₃N⁺(CH₃)₃,Br^?. A pathway involving an intermediate is suggested for the hydrolysis of the ester. Hydrolysis rate of the intermediate in the presence of micelles is the same as hydrolysis rate for the ester in the absence of micelles. Consequently, hydrolysis of p-nitrophenyl acetate is not catalysed by one type of micelle, while it is enhanced by another type of micelle.     

Palladium-induced cyclizations for the synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans: studies of the C7-C22 core of amphidinolide K

[formula: see text] The diastereoselective synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans via Pd(0)-catalyzed cyclization of 2-methylene-1,4-diols is described. Investigations into the scope of the reaction and its application toward the synthesis of amphidinolide K is reported.     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.