Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + ZnCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases and relevant gaseous species of the (NaCl + KCl + MgCl₂ + CaCl₂ + ZnCl₂) system, and optimized model parameters have been found. The (NaCl + KCl + MgCl₂ + CaCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary and ternary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model for short-range ordering was used for the molten salt phase.     

Development and validation of a ultra-high-performance liquid chromatography-UV method for the detection and quantification of erectile dysfunction drugs and some of their analogues found in counterfeit medicines

Pharmaceutical counterfeiting is a permanently growing problem. Control laboratories are constantly analysing counterfeit medicines. In industrialised countries, one of the main counterfeited class of medicines are erectile dysfunction drugs. This paper describes the development and validation of a fast method to detect and quantify the three authorised phosphodiesterase type 5 inhibitors and five analogues. The method is based on the use of a sub-2 microns polar-embedded column with a gradient using acetonitrile as organic modifier and 10 mM ammonium formate buffer (pH 3.5) as aqueous component of the mobile phase. The separation was achieved in less than 4.5 min. The method has also been compared to the registered HPLC method for the assay of Viagra^® which was considered as the reference method. The method is also compatible with on-line coupling mass spectrometry and will significantly reduce analysis times and solvent consumption.     

Modulating the photophysical properties of azamacrocyclic europium complexes with charge-transfer antenna chromophores

Two europium complexes with bis(bipyridine) azamacrocyclic ligands featuring pendant arms with or without π-conjugated donor groups are synthesized and fully characterized by theoretical calculations and NMR spectroscopy. Their photophysical properties, including two-photon absorption, are investigated in water and in various organic solvents. The nonfunctionalized ligand gives highly water-stable europium complexes featuring bright luminescence properties but poor two-photon absorption cross sections. On the other hand, the europium complex with an extended conjugated antenna ligand presents a two-photon absorption cross section of 45 GM at 720 nm but is poorly luminescent in water. A detailed solvent-dependent photophysical study indicates that this luminescence quenching is not due to the direct coordination of O-H vibrators to the metal center but to the increase of nonradiative processes in a protic solvent induced by an internal isomerization equilibrium.     

Hexaphenylbenzene as a rigid template for the straightforward syntheses of "star-shaped" glycodendrimers

Original glycodendrimers emanating from propargylated hexaphenylbenzene cores and containing up to 54 peripheral sugar ligands have been synthesized by Cu(I)-catalyzed [1,3]-dipolar cycloadditions using both convergent and divergent approaches.     

The excited state dipole moments of betaine pyridinium investigated by an innovative solvatochromic analysis and TDDFT calculations

This work reports on the solvatochromic properties of a simple heterocyclic betaine pyridinium, 2-(1-pyridinio)benzimidazolate (SBPa), having promising potentialities in non-linear optics. From advanced PCM-TDDFT calculations, the solvatochromism of SBPa was found to be unusual, involving two different electronic states for absorption (S(0)→ S(2)) and emission (S(1)→S'(0)). To account for this behavior, we developed an innovative physical treatment which consists in a non-linear fit of the solvatochromic data using the Bilot-Kawski theoretical model and visualizing the least-square coefficient χ(2) on a 2D map as a function of the solute polarizability and gas phase absorption energy. In parallel, Kamlet-Taft correlations were undertaken to select a propitious set of electrostatic solvents usable in this treatment. Protic solvents that lead to specific interactions and nonpolar solvents that favor dimerization processes were excluded. From a choice of aprotic solvents with sufficiently high polarity, 4 dipole moments μ(g)(S(0)) = +9.1 D, μ(e)(S(2)) = -1.5 D, μ(e)(S(1)) = 0 D and μ(g)(S'(0)) = +3.31 D were determined, the 3 former values being in close agreement with TDDFT values, although the solute polarizability values seem underestimated. Anyhow, disregarding this discrepancy, we evaluated the static hyperpolarizability to β(0) = -64 × 10(-30) esu from the solvatochromic data in close agreement with DFT calculations.     

HCl adsorption on ice at low temperature: a combined X-ray absorption, photoemission and infrared study

The reaction of HCl on water ice provides a simple case for understanding dissociation and proton transfer in this non-optimal, incomplete solvation environment, playing a central role in atmospheric chemistry. This reaction has been repeatedly reported as thermally dependent, whereas the theoretical models predict a spontaneous dissociation. We examine the adsorption of HCl on ice at low temperature (50 K and 90 K) via a combination of near-edge X-ray absorption spectroscopy (NEXAFS) at the chlorine L-edge, photoemission (XPS and UPS), and reflection-adsorption infrared spectroscopy (FT-RAIRS). We show the complete dissociation of HCl into Cl(-) and H(+) through 3 hydrogen bonds, predominantly by direct reaction with water (80%) and by self-solvation (20%), in full agreement with the prediction of a barrierless process.     

Effect of alkyl chain length and hydroxyl group functionalization on the surface properties of imidazolium ionic liquids

Properties of the surface of ionic liquids, such as surface tension, ordering, and charge and density profiles, were studied using molecular simulation. Two types of modification in the molecular structure of imidazolium cations were studied: the length of the alkyl side chain and the presence of a polar hydroxyl group at the end of the side chain. Four ionic liquids were considered: 1-ethyl-3-methylimidazolium tetrafluoroborate, [C(2)C(1)im][BF(4)]; 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate, [C(2)OHC(1)im][BF(4)]; 1-octyl-3-methylimidazolium tetrafluoroborate, [C(8)C(1)im][BF(4)] and 1-(8-hydroxyoctyl)-3-methylimidazolium tetrafluoroborate, [C(8)OHC(1)im][BF(4)]. The surface tension was calculated using both mechanical and thermodynamic definitions, with consistent treatment of the long-range corrections. The simulations reproduce the available experimental values of surface tension with a maximum deviation of ±10%. This energetic characterization of the interface is completed by microscopic structural analysis of orientational ordering at the interface and density profiles along the direction normal to the interface. The presence of the hydroxyl group modifies the local structure at the interface, leading to a less organized liquid phase. The results allow us to relate the surface tension to the structural ordering at the liquid-vacuum interface.     

Adsorption of n-alkane vapours at the water surface

Monte Carlo simulations are reported here to predict the surface tension of the liquid-vapour interface of water upon adsorption of alkane vapours (methane to hexane). A decrease of the surface tension has been established from n-pentane. A correlation has been evidenced between the decrease of the surface tension and the absence of specific arrangement at the water surface for n-pentane and n-hexane. The thermodynamic stability of the adsorption layer and the absence of film for longer alkanes have been checked through the calculation of a potential of mean force. This complements the work recently published [Ghoufi et al., Phys. Chem. Chem. Phys., 2010, 12, 5203] concerning the adsorption of methane at the water surface. The decrease of the surface tension has been interpreted in terms of the degree of hydrogen bonding of water molecules at the liquid-vapour interface upon adsorption.     

Global convergence of descent processes for solving non strictly monotone variational inequalities

This paper addresses the question of global convergence of descent processes for solving monotone variational inequalities defined on compact subsets ofR ⁿ . The approach applies to a large class of methods that includes Newton, Jacobi and linearized Jacobi methods as special cases. Furthermore, strict monotonicity of the cost mapping is not required.Research supported by NSERC grant A5789.     

Adaptive mesh refinement for the control of cost and quality in finite element analysis

Adaptive strategies are a necessary tool to make finite element analysis applicable to engineering practice. In this paper, attention is restricted to mesh adaptivity. Traditionally, the most common mesh adaptive strategies for linear problems are used to reach a prescribed accuracy. This goal is best met with an h-adaptive scheme in combination with an error estimator. In an industrial context, the aim of the mechanical simulations in engineering design is not only to obtain greatest quality but more often a compromise between the desired quality and the computation cost (CPU time, storage, software, competence, human cost, computer used). In this paper, we propose the use of alternative mesh refinement criteria with an h-adaptive procedure for 3D elastic problems. The alternative mesh refinement criteria (MR) are based on: prescribed number of elements with maximum accuracy, prescribed CPU time with maximum accuracy and prescribed memory size with maximum accuracy. These adaptive strategies are based on a technique of error in constitutive relation (the process could be used with other error estimators) and an efficient adaptive technique which automatically takes into account the steep gradient areas. This work proposes a 3D method of adaptivity with the latest version of the INRIA automatic mesh generator GAMHIC3D.