The effect of media composition on EDTA degradation byAgrobacterium sp.

Applied Biochemistry and Biotechnology - EDTA degradation by anAgrobacterium sp. has been examined by quantifying14C-labeled CO2 produced from iron-[2-14C] EDTA and by measured loss of nonlabeled...     

Application of relaxation periods during electrodialysis of a casein solution: Impact on anion-exchange membrane fouling

Electrodialysis (ED) is a membrane process used on a large scale. However, one of the common problems is fouling of ion-exchange membranes stacked in the cell. The use of pulsed power, consisting in applying a constant current density during a fixed time of application (T_on) followed by a pause duration (T_off), was demonstrated recently as an effective fouling mitigation method for electrodialysis. Up until now, no work has investigated the potential of electrodialysis using pulsed electric field on protein fouling. The aim of the present work was to study the influence of pulsed electric field (PEF) with a low frequency square shaped periodic signal (T_on = 10 s–T_off = 10 s, T_on = 10 s–T_off = 40 s) in comparison with dc current during electrodialysis of a casein solution at different current densities (10, 20 and 30 mA/cm²) on membrane fouling. It appeared from these results that PEF, under certain conditions of pulse, would avoid fouling on anion-exchange membranes. For 10 s–40 s pulsed electric field conditions, no fouling was observed with any density, while for 10 s–10 s PEF conditions, fouling appeared only at current density over 10 mA/cm². dc current, whatever the current density conditions, led to a fouling on the diluate side of the AEM. Furthermore, when fouling occurred, magnitude layer thickness and dry weight increased with the applied current density. The nature of the fouling was identified as 97% protein. The protein fouling would be due to the dissociation of water molecules and/or heat increase at the anion-exchange membrane interface. The relaxation time of the pulse would limit both phenomena on the membrane.     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

Conformation and distribution of groups on the surface of amphiphilic polyether-co-polyester dendrimers: effect of molecular architecture

Amphiphilic polyester-co-polyether (PEPE) dendrimers synthesized from poly(ethylene glycol) (PEG) were examined to understand the influence of alterations in the architecture of dendrimers on their conformation at interfaces and distribution of various groups on their surface. Effect of changes in the number of branching points, type of terminal functional groups and generation of dendrimer was primarily evaluated. Dendrimers were deposited on mica by spin coating at 0.1 mg/mL. Tapping mode atomic force microscopy (AFM) was employed for the visualization of dendrimer topographies while, X-ray photoelectron spectroscopy (XPS), AFM phase and force imaging were used as the tools for characterization of their surfaces. Individual dendrimer molecules could be imaged by AFM, which showed that they are round or oval in topography. Dendrimers were also flattened on mica but the extent of flattening differed with the chemical structure; for instance, third generation dendrimers were more flattened than second generation dendrimers whereas, dendrimers with higher number of branches had greater height above the mica surface. Hydrophilic and hydrophobic groups present towards the aerial interface existed in distinct zones rather than being distributed randomly, except in dendrimer with higher number of branches. The percentage of various hydrophobic groups on the surface of dendrimer was enhanced by increase in the number of branches but, was lowered by the presence of hydroxyl groups as the pendant terminal groups. Furthermore, the core of dendrimers was not always located towards the centre, its position was found to be altered by the number of branching points, type of terminal functional groups and the generation of dendrimer.     

Remodeling of ordered membrane domains by GPI-anchored intestinal alkaline phosphatase

Glycosylphosphatidyl-inositol (GPI)-anchored proteins preferentially localize in the most ordered regions of the cell plasma membrane. Acyl and alkyl chain composition of GPI anchors influence the association with the ordered domains. This suggests that, conversely, changes in the fluid and in the ordered domains lipid composition affect the interaction of GPI-anchored proteins with membrane microdomains. Validity of this hypothesis was examined by investigating the spontaneous insertion of the GPI-anchored intestinal alkaline phophatase (BIAP) into the solid (gel) phase domains of preformed supported membranes made of dioleoylphosphatidylcholine/dipalmitoylphosphatidylcholine (DOPC/DPPC), DOPC/sphingomyelin (DOPC/SM), and palmitoyloleoylphosphatidylcholine/SM (POPC/SM). Atomic force microscopy (AFM) showed that BIAP inserted in the gel phases of the three mixtures. However, changes in the lipid composition of membranes had a marked effect on the protein containing bilayer topography. Moreover, BIAP insertion was associated with a net transfer of phospholipids from the fluid to the gel (DOPC/DPPC) or from the gel to the fluid (POPC/SM) phases. For DOPC/SM bilayers, transfer of lipids was dependent on the homogeneity of the gel SM phase. The data strongly suggest that BIAP interacts with the most ordered lipid species present in the gel phases of phase-separated membranes. They also suggest that GPI-anchored proteins might contribute to the selection of their own microdomain environment.     

Mass spectrometry and scanning electron microscopy study of silicone tunneled dialysis catheter integrity after an exposure of 15 days to 60% ethanol solution

Anti-infectious lock is an emerging therapeutic option for preventing and/or controlling catheter-associated infection. Ethanol has widespread bactericidal activity, limited side effects, and low risk of inducing antimicrobial resistance. However, concerns have been raised about ethanol-induced catheter structural degradation. In this study, silicone catheters were immersed at 37 degrees C in three different solvents: 0.9% sodium chloride, 60% ethanol, and 95% ethanol for 4 h, 15 days and 15 days after a first storage of 4 h. Scanning electron microscopy (magnification 1000-20 000 times) of the inner surface of the catheter revealed no damage to the lumen surfaces of catheters immersed in 95% ethanol for 15 days compared with the reference catheter. Gas chromatography/mass spectrometry (GC/MS) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) analysis of the storage solutions revealed a significant release of polydimethylsiloxanes having a number of dimethylsiloxane units lower than 30 in the 95% ethanol solution and a structure highly consistent with a cyclic structure. Most release occurred within the first 4 h of exposure. In contrast, there was no difference in the small amounts of silicone released in 0.9% sodium chloride as reference and 60% ethanol solution, whatever the exposure time. These results should allow the development of clinical trials to assess the efficacy of the 60% ethanol lock technique in preventing or controlling the infectious complications of silicone dialysis catheters.     

The synthesis of a pyrrole-functionalized cyclobis(paraquat-p-phenylene) derivative and its corresponding [2]rotaxane and [2]catenane and their subsequent deposition onto an electrode surface

We report the convenient synthesis of a pyrrole-functionalized tetracationic cyclophane, [2]rotaxane, and [2]catenane. X-ray crystallography has confirmed the interlocked structure of the catenane. We have investigated the solution properties of these systems using solution electrochemistry, NMR, and UV-vis spectroscopy. We have also demonstrated that it is possible to immobilize these systems onto a platinum working electrode surface. We have shown that films of the cyclophane have the ability to undergo complexation with a dialkyloxynaphthalene derivative.     

On the Synthesis of Pyrrolobenzo[<Emphasis Type="Italic">b</Emphasis>]thieno[1,4]diazepines

Summary. 2-Amino-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile was converted into the corresponding 2-(pyrrol-1-yl) derivative, followed by reduction of the latter compound into the corresponding amine. This amine and its acyl, aroyl, and arylidene derivatives were used as synthons in the synthesis of several title compounds.