Atmospheric pressure photoionization coupled to porous graphitic carbon liquid chromatography for the analysis of globotriaosylceramides. Application to Fabry disease

Globotriaosylceramides (Gb(3)) are biological compounds implicated in Fabry disease, a lysosomal storage disease due to the deficient activity of alpha-D-galactosidase A, which results in an accumulation of Gb(3) in many organs. The naturally occurring samples are composed of mixtures of several molecular species differing by the structure of the alkyl chains and the nature of the sphingoid base. Atmospheric pressure photoionization mass spectrometry (APPI-MS) proved to be an efficient method for the analysis of globotriaosylceramide molecular species, both in direct injection and by coupling with liquid chromatography (LC). In the positive ion mode, in-source fragmentations yield very precious information that can be used to determine the structure of the alkyl chains. In the negative ion mode, the chloroform solvent participates to the analyte ionization by forming an adduct with chloride ions generated in situ. Combination of LC on a Porous Graphitic Carbon stationary phase and APPI-MS allowed the detection of a great number of species from biological samples isolated from Fabry patients. This method could be an interesting analytical tool for the biochemical investigation of (sphingo) lipid metabolism.     

Laser spectroscopy of Si3C

The C 1B1<--X 1A1 band system of the potential interstellar species Si3C has been recorded in a silane/acetylene discharge by resonant two-color two-photon ionization spectroscopy. The origin band is located near 24,925 cm-1 (3.09 eV). Several other features in the spectrum are assigned to progressions in the Si-Si stretching modes as well as to sequence and hot band transitions. The assignment was facilitated by ab initio calculations, which also indicate that this is the strongest electronic transition of Si3C in the visible region of the spectrum. Features in the spectrum are broadened considerably (ca. 10 cm-1), and suggest an excited state lifetime of a few picoseconds. Possible reasons for the short-lived nature of the excited state are discussed.     

An electron transfer approach to the preparation of highly functionalized anthraquinones

A series of highly functionalized quinones was prepared by an original reaction of 2,3-bis(chloromethyl)-1,4-dimethoxyanthraquinone (6) with various nitronate anions under electron transfer reaction conditions.     

Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

Poly(4-vinylpyridine) catalyzed hydrolysis of methyl bromide to methanol and dimethyl ether

The hydrolysis of methyl bromide with neutral water is performed in the presence and absence of various amines in a batch reactor at different temperatures (50–125 °C). Screening of poly(4-vinylpyridine) as a potential reusable solid amine catalyst showed maximum efficiency. This significant enhancement in efficiency is due to the capture of HBr by solid PVP and remains phase-separated driving the reaction forward. The major advantage of this process is that the polymer can be easily regenerated and reused without loss of activity making it a very effective catalyst for the conversion of methyl halides to methanol and dimethyl ether.     

Encapsulated clay particles in polystyrene by RAFT mediated miniemulsion polymerization

RAFT grafted montmorillonite (MMT) clays [i.e., N,N‐dimethyl‐N‐(4‐(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium‐MMT (PCDBAB‐MMT) and N‐(4‐((((dodecylthio)carbonothioyl)thio)methyl)benzyl)‐N,N‐dimethylethanammo‐nium‐MMT (DCTBAB‐MMT)] of various loadings were dispersed in styrene (S) monomer and the resultant mixtures emulsified and sonicated in the presence of a hydrophobe (hexadecane) into miniemulsions. The stable miniemulsions thus obtained were polymerized to yield encapsulated polystyrene‐clay nanocomposites (PS‐CNs). The molar mass and polydispersity index (PDI) of the PS‐CNs depended on the amount of RAFT agent in the system, in accordance with the features of the RAFT process. The morphology of the PS‐CNs ranged from partially exfoliated to an intercalated morphology, depending on the percentage clay loading. The thermomechanical properties of the PS‐CNs were better than those of the neat PS polymer, and were dependent on the molar mass, PS‐CN morphology and clay loading. The similarities and differences of the PS‐CNs prepared here by miniemulsion polymerization were compared to those prepared using the same RAFT agents and polymer system by bulk polymerization (as reported by us in a previous article). © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7114–7126, 2008     

Using apparent molecular weight from SEC in controlled/living polymerization and kinetics of polymerization

Apparent molecular weights from size exclusion chromatography, that is molecular weights relative to standards of a nature different to that of the polymer sample being studied, are frequently used. We use calculations corresponding to realistic cases to provide guidelines for situations when, and to what extent, apparent molecular weights (MWs) can be meaningful. In controlled polymerization, we show how, without due care, use of apparent MW, could lead to the incorrect conclusion that the reaction was not controlled, whereas the true MWs would be close to theoretical values. We show here that the quality of the eluent as a solvent for the standard and the polymer sample is a good indication of the accuracy and the significance of the apparent polydispersity index. Accurate Mark–Houwink–Sakurada parameters are of limited availability, but the data about solvent quality available in handbooks or available from static light scattering measurements. Apparent M_n is of no use in controlled polymerization if simple simulations as performed in this work do not validate their use. The determination of transfer constants by the Mayo plot can be performed using apparent M_n without introducing any significant error, contrary to apparent weight‐average molecular weight M_w or apparent ln number distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 897–911, 2008     

Synthesis and characterization of synthetic polymer colloids colloidally stabilized by cationized starch oligomers

A method is developed for anchoring enzymatically degraded cationized starch as electrosteric stabilizers onto synthetic latices, using cerium(IV) to create free‐radical grafting sites on the starch. Direct anchoring of debranched starch onto a poly(methyl methacrylate) seed latex yields a latex stabilized by well‐defined oligosaccharides. Using α‐amylase to randomly cleave starch to form (1→4)‐α‐glucans, and a comonomer, N‐isopropyl acrylamide (NIPAM), whose corresponding polymer exhibits a lower critical solution temperature (LCST), creates a means to synthesize block (or graft) oligomers of oligosaccharide and synthetic polymer, which are water soluble at room temperature. Above 30 °C, they become amphiphilic and form self‐emulsifying nanoparticles (sometimes termed “frozen micelles”) from which a synthetic latex is grown after addition of methyl methacrylate, the collapsed NIPAM‐containing entities functioning as a type of in situ seed. This synthesis of stable synthetic latex particles is shown to have a high grafting efficiency. The starch fragments were characterized by ¹H solution‐state NMR before grafting, and ¹³C solid‐state cross‐polarization magic‐angle spinning (CP‐MAS) NMR was used to characterize the starch oligomers actually grafted on the final latex. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1836–1852, 2009     

Viscosimetric detection in size-exclusion chromatography (SEC/GPC): The Goldwasser method and beyond

Size-exclusion chromatography (SEC or GPC) is the most widely used separation method to characterize polymers. The high level of complexity of most polymeric materials necessitates the use of not only concentration-sensitive detection but also structure-sensitive detection. Viscometry is usually used in conjunction with a concentration-sensitive detector and universal calibration to determine molecular weights of polymers. Goldwasser proposed to use a viscometer as a single detector to determine number-average molecular weights, M(n) (ACS Symposium Series, 521, 143). The method is particularly of interest when concentration-sensitive detection is not available, because the sample is isorefractive or not UV-absorbing, or because composition is not constant (copolymers). It has known very little applications so far. It actually does not only allow determining M(n), but also the number hydrodynamic volume distribution. This opens a wider range of applications for the Goldwasser method. Size-exclusion chromatography only yields inaccurate molecular weight distributions for some complex branched polymers. Hydrodynamic volume distributions have then a strong potential for comparative studies owing to their far higher accuracy. Our experimental tests highlight the fact that the method is highly sensitive to noise and careful optimization of the injection concentration is needed, but number distribution can be obtained as well as M(n).