Oligomer orientation in vapor-molecular-layer-deposited alkyl-aromatic polyamide films

The surface-limited molecular-layer deposition of alkyl-aromatic polyamide films using sequential doses of 1,4-butane diamine (BDA) and terephthaloyl dichloride (TDC) is characterized using in situ quartz crystal microbalance and ex situ spectroscopy analysis. For the first time, near-edge X-ray absorption fine structure (NEXAFS) spectroscopy is used to offer insight into molecular orientation in films deposited via molecular-layer deposition (MLD). The results show that the oligomer units are lying nearly parallel to the surface, which differs from the linear vertical growth mode often used to illustrate film growth.     

Cost-effective assembly of a basic fiber-optic hydrophone for measurement of high-amplitude therapeutic ultrasound fields

Design considerations, assembly details, and operating procedures of one version of a cost-effective basic fiber-optic probe hydrophone (FOPH) are described in order to convey practical information to groups interested in constructing a similar device. The use of fiber optic hydrophones can overcome some of the limitations associated with traditional polyvinylidene difluoride (PVDF) hydrophones for calibration of acoustic fields. Compared to standard PVDF hydrophones, FOPH systems generally have larger bandwidths, enhanced spatial resolution, reduced directionality, and greater immunity to electromagnetic interference, though they can be limited by significantly lower sensitivities. The FOPH system presently described employs a 100-microm multimode optical fiber as the sensing element and incorporates a 1-W laser diode module, 2 x 2 optical coupler, and general-purpose 50-MHz silicon p-i-n photodetector. Wave forms generated using the FOPH system and a reference PVDF hydrophone are compared, and intrinsic and substitution methods for calibrating the FOPH system are discussed. The voltage-to-pressure transfer factor is approximately 0.8 mV/MPa (-302 dB re 1 V/microPa), though straightforward modifications to the optical components in the FOPH system are discussed that can significantly increase this value. Recommendations are presented to guide the choice of optical components and to provide practical insight into the routine usage of the FOPH device.     

Hydrogen bonding cavities regulating redox behavior and binding of metal-bound ligands

Binding of 3,5-di-tert-butyl-1,2-benzochatechol (H2DTBC) at Zn(II) complexes of a tetradentate, tripodal ligand L is significantly enhanced (36-4.6 x 10(4) fold), and its reduction potential shifted (90-270 mV) to more positive values by introducing one to three amino hydrogen bond donors. The structure of one of the [(L)Zn(DTBC)] complexes is reported and shows intramolecular N-H...O hydrogen bonding between the ligand-based amino group and the Zn(II)-bound chatecholate, which provides an explanation for the observed behavior.     

Copper(I) alkynyl clusters, [Cu(x+y)(hfac)(x)(C[triple chemical bond]CR)(y)], with Cu(10)-Cu(12) cores

The facile syntheses and the structures of five new Cu(I) alkynyl clusters, [Cu(12)(hfac)(8)(C[triple chemical bond]CnPr)(4)(thf)(6)]xTHF (1), [Cu(12)(hfac)(8)(C[triple chemical bond]CtBu)(4)] (2), [Cu(12)(hfac)(8)(C[triple chemical bond]CSiMe(3))(4)] (3), [Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(4)(diethyl ether)]/[Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(3)(C[triple chemical bond]CnPr)(diethyl ether)] (4) and [Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(4)(diethyl ether)] (5) are reported, in which hfacH=1,1,1,5,5,5-hexafluoropentan-2,4-dione. The first independent molecule found in the crystals of 4 (4 a) proved to be chemically identical to 5. The Cu(10) and Cu(12) cores in these clusters are based on a central "square" Cu(4)C(4) unit. Whilst the connectivities of the Cu(10) or Cu(12) units remain identical the geometries vary considerably and depend on the bulk of the alkynyl group, weak coordination of ether molecules to copper atoms in the core and CuO intramolecular contacts formed between Cu-hfac units on the periphery of the cluster. Similar intermolecular contacts and interlocking of Cu-hfac units are formed in the simple model complex [Cu(2)(hfac)(2)(HC[triple chemical bond]CtBu)] (6). When linear alkynes, C(n)H(2n+1)C[triple chemical bond]CH, are used in the synthesis and non-coordinating solvents are used in the workup, further association of the Cu(4)C(4) cores occurs and clusters with more than eighteen copper atoms are isolated.     

Reaction of azole heterocycles with tris(dimethylamino)borane, a new method for the construction of tripodal borate-centred ligands

Reaction of 2-mercapto-1-methylimidazole (methimazole) with tris(dimethylamino)borane, B(NMe2)3, provides the tetrahedral dimethylamine adduct of tris(methimazolyl)borane, [(Me2HN)B(methimazolyl)3]. By contrast, imidazole, 2-methylimidazole, 2-chloroimidazole and benzimidazole provide the homoleptic tetra-azolyl systems H[B(azolyl)4], and the same product is obtained even when a substoichiometric quantity of the heterocyle is employed. The change in reaction outcome is correlated with the variation of basic pKa for the heterocycles. A simple acid-base reaction with elimination of HNMe2 is proposed for the reaction with the weakly basic, but more strongly acidic, methimazole. However, for the more strongly basic imidazoles, initial coordination of the heterocycle imine nitrogen to the weakly Lewis acidic boron centre in B(NMe2)3 to form the tetrahedral adduct [(azole)B(NMe2)3] is proposed. The greater availability of the NMe2 lone pairs in this species results in increased basicity and a rapid reaction with further heterocycle to provide the observed H[B(azolyl)4] products. For 2-nitroimidazole, the low basicity (and increased N-H acidity) results in the formation of [(HNMe2)B(2-nitroimidazolyl)3] on reaction with B(NMe2)3, analogous to the product formed with methimazole. Both [(HNMe2)B(methimazolyl)3] and H[B(benzimidazolyl)4] have been structurally characterised by single crystal X-ray crystallography. This chemistry has been exploited to provide a new synthesis of borate-centred tripod ligands, whereby N-methylimidazole is used to activate B(NMe2)3 to reaction with methimazole to form the new ligand [(N-methylimidazole)B(methimazolyl)3] in good yield and a complex of this ligand with Ru(II) has been structurally characterised.     

Tuning the reactivity of osmium(II) and ruthenium(II) arene complexes under physiological conditions

The Os(II) arene ethylenediamine (en) complexes [(eta(6)-biphenyl)Os(en)Cl][Z], Z = BPh(4) (4) and BF(4) (5), are inactive toward A2780 ovarian cancer cells despite 4 being isostructural with an active Ru(II) analogue, 4R. Hydrolysis of 5 occurred 40 times more slowly than 4R. The aqua adduct 5A has a low pK(a) (6.3) compared to that of [(eta(6)-biphenyl)Ru(en)(OH(2))](2+) (7.7) and is therefore largely in the hydroxo form at physiological pH. The rate and extent of reaction of 5 with 9-ethylguanine were also less than those of 4R. We replaced the neutral en ligand by anionic acetylacetonate (acac). The complexes [(eta(6)-arene)Os(acac)Cl], arene = biphenyl (6), benzene (7), and p-cymene (8), adopt piano-stool structures similar to those of the Ru(II) analogues and form weak dimers through intermolecular (arene)C-H...O(acac) H-bonds. Remarkably, these Os(II) acac complexes undergo rapid hydrolysis to produce not only the aqua adduct, [(eta(6)-arene)Os(acac)(OH(2))](+), but also the hydroxo-bridged dimer, [(eta(6)-arene)Os(mu(2)-OH)(3)Os(eta(6)-arene)](+). The pK(a) values for the aqua adducts 6A, 7A, and 8A (7.1, 7.3, and 7.6, respectively) are lower than that for [(eta(6)-p-cymene)Ru(acac)(OH(2))](+) (9.4). Complex 8A rapidly forms adducts with 9-ethylguanine and adenosine, but not with cytidine or thymidine. Despite their reactivity toward nucleobases, complexes 6-8 were inactive toward A549 lung cancer cells. This is attributable to rapid hydrolysis and formation of unreactive hydroxo-bridged dimers which, surprisingly, were the only species present in aqueous solution at biologically relevant concentrations. Hence, the choice of chelating ligand in Os(II) (and Ru(II)) arene complexes can have a dramatic effect on hydrolysis behavior and nucleobase binding and provides a means of tuning the reactivity and the potential for discovery of anticancer complexes.     

An off-lattice Wang-Landau study of the coil-globule and melting transitions of a flexible homopolymer

The Wang-Landau Monte Carlo approach is applied to the coil-globule and melting transitions of off-lattice flexible homopolymers. The solid-liquid melting point and coil-globule transition temperatures are identified by their respective peaks in the heat capacity as a function of temperature. The melting and theta points are well separated, indicating that the coil-globule transition occurs separately from melting even in the thermodynamic limit. We also observe a feature in the heat capacity between the coil-globule and melting transitions which we attribute to a transformation from a low-density liquid globule to a high-density liquid globule.     

A diastereoselective radical cyclization approach to substituted quinuclidines

A new, concise, and flexible approach to novel quinuclidines has been developed, which employs a phosphorus hydride mediated radical addition/cyclization reaction in the key step. 1,7-Diene 5 reacts with diethyl thiophosphite in an efficient and diastereoselective radical addition/cyclization reaction to give trisubstituted piperidines 4ab. Piperidines 4ab are subsequently converted into 2,5-disubstituted quinuclidines using S(N)2-type cyclizations. Finally, the resulting quinuclidines are shown to undergo novel Horner-Wadsworth-Emmons-type (HWE-type) reactions to give unsaturated quinuclidines 21a and 21b, which have structures similar to that of (-)-quinine 1.