Magnetic carbon nanotube as a highly stable and retrievable support for the heterogenization of sulfonic acid and its application in the synthesis of 2-(1H-tetrazole-5-yl) acrylonitrile derivatives

In the present study, a novel magnetic carbon nanotube functionalized by chlorosulfonicacid (Fe₃O₄-CNT-SO₃H) with nanotube morphology decorated by the spherical nanoparticles was prepared, characterized and introduced as a retrievable magnetic heterogeneous nanocatalyst for green synthesis a variety of 2-(1H-tetrazole-5-yl) acrylonitrile via multicomponent domino Knoevenagel condensation/ 1,3-dipolar cycloaddition reaction between aromatic aldehydes, malononitrile, and sodium azide under solvent free conditions. The catalyst was magnetically separated from the reaction system by an outer magnetic force and recycled up to five runs without a remarkable loss in its efficiency. The as-preparedacidic magnetic nanocomposite was characterized by different techniques inclusive Fourier transform infrared, thermogravimetric analysis, energy dispersive X-ray, field emission scanning electron microscopy, X-ray diffraction, vibrating sample magnetometry, CHNS elemental analysis, and acid-base titration. Easy workup, affordability, elimination of volatile and toxic solvents, and high yield of products are some merits of this protocol.     

Temperature‐dependent kinetic study for ozonolysis of selected tropospheric alkenes

Ozonolysis reactions of alkenes are suggested to play major roles in the chemistry of the troposphere. Rate constants for the gas‐phase reactions of O₃ with a series of alkenes were determined using relative rate technique based on GC/FID measurements of alkene decays. Experiments were carried out in air over the temperature range of 278–353 K at an atmospheric pressure of 760 Torr. An excess of 1,3,5‐trimethylbenzene was used as a HO radical scavenger in all experiments. Arrhenius parameters were calculated for ozonolysis of 1‐butene, 1‐pentene, 1‐hexene, 1‐heptene, 2‐methyl‐1‐butene, isobutene, trans‐2‐butene, trans‐2‐pentene, cis‐2‐pentene, trans‐2‐hexene, cis‐2‐hexene, 3‐chloropropene, 1,1‐dichloroethene, and isoprene from temperature‐dependent studies of the rate constants. The rate constants obtained in this study are compared with previous literature data. A good linear correlation between the logarithms of the rate constants and calculated HOMO energies of selected alkenes is observed. However, no clear correlation could have been drawn for chlorinated substituted alkenes. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 678–684, 2002     

Photolytic decarboxylation of α-arylcarboxylic acids mediated by HgF2 under a dioxygen atmosphere

Mercuric fluoride (HgF₂), as a light-sensitive inorganic compound, in the presence of dioxygen is able to convert various α-aryl- and α,α-diarylcarboxylic acids into the corresponding aldehydes and ketones selectively under photoirradiation via trapping of the benzylic radical by O₂.     

Development of a new microextraction method based on a dynamic single drop in a narrow-bore tube: application in extraction and preconcentration of some organic pollutants in well water and grape juice samples

A novel sample preparation technique, the microextraction method based on a dynamic single drop in a narrow-bore tube, coupled with gas chromatography-flame ionization detection (GC-FID) is presented in this paper. The most important features of this method are simplicity and high enrichment factors. In this method, a microdrop of an extraction solvent assisted by an air bubble was repeatedly passed through a narrow-bore closed end tube containing aqueous sample. It has been successfully used for the analysis of some pesticides as model analytes in aqueous samples. Parameters affecting the method's performance such as selection of extraction solvent type and volume, number of extractions, volume of aqueous sample (tube length), and salt effect were studied and optimized. Under the optimal conditions, the enrichment factors (EFs) for triazole pesticides were in the range of 141-214 and the limits of detection (LODs) were between 2 and 112 μg L⁻¹. The relative standard deviations (C = 1000 μg L⁻¹, n = 6) were obtained in the range of 2.9-4.5%. The recoveries obtained for the spiked well water and grape juice samples were between 71 and 106%. Low cost, relatively short sample preparation time and less solvent consumption are other advantages of the proposed method.     

Anisotropic Conductivity at the Single‐Molecule Scale

In most junctions built by wiring a single molecule between two electrodes, the electrons flow along only one axis: between the two anchoring groups. However, molecules can be anisotropic, and an orientation‐dependent conductance is expected. Here, we fabricated single‐molecule junctions by using the electrode potential to control the molecular orientation and access individual elements of the conductivity tensor. We measured the conductance in two directions, along the molecular plane as the benzene ring bridges two electrodes using anchoring groups (upright) and orthogonal to the molecular plane with the molecule lying flat on the substrate (planar). The perpendicular (planar) conductance is about 400 times higher than that along the molecular plane (upright). This offers a new method for designing a reversible room‐temperature single‐molecule electromechanical switch that controllably employs the electrode potential to orient the molecule in the junction in either “ON” or “OFF” conductance states.     

Influence type of natural rubber on properties of green biodegradable thermoplastic natural rubber based on poly(butylene succinate)

Green biodegradable thermoplastic natural rubber (GB‐TPNR) based on simple blend of natural rubber (NR) and poly(butylene succinate) (PBS) was prepared using three NR alternatives: unmodified NR and epoxidized NR with 25‐ or 50‐mol% epoxide (ie, ENR‐25 or ENR‐50). It was found that ENR‐50/PBS blend showed the best compatibility, which resulted in superior mechanical and thermal properties with the highest crystallinity of the PBS phase, on comparing with the ENR‐25/PBS and NR/PBS blends. This might be attributed to stronger chemical interactions between the epoxide groups in ENR‐50 and the polar functional groups in PBS, which were confirmed by Fourier transform infrared (FTIR). Furthermore, scanning electron microscopy (SEM), atomic force microscopy (AFM), and polarizing optical microscopy (POM) micrographs of ENR‐50/PBS blend revealed phase separation with finer‐grained cocontinuous structure than in ENR‐25/PBS and NR/PBS simple blends. Furthermore, the chemical interactions in ENR‐50/PBS blend enhanced the resistance to accelerated weathering.     

Green synthesis and chemical characterization of silver nanoparticles obtained using Allium saralicum aqueous extract and survey of in vitro antioxidant,cytotoxic, antibacterial and antifungal properties

Allium saralicum R.M. Fritsch has been used in Iranian traditional medicine as a remedial supplement for microbial diseases. This paper reports the green synthesis, chemical characterization and antioxidant, cytotoxic, antibacterial and antifungal properties of silver nanoparticles obtained using aqueous extract of A. saralicum leaves. In this synthesis, no surfactants or stabilizers were used. For characterization, UV–visible spectroscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and field emission scanning electron microscopy were used. 2,2‐Diphenyl‐1‐picrylhydrazyl was used in experiments to assess the antioxidant potential of the silver nanoparticles, which revealed an impressive prevention in comparison with butylated hydroxytoluene. The synthesized silver nanoparticles at low doses (1–250 μg dl^?1) did not show marked cytotoxic activity (against cervical cancer cells (Hela), breast cancer cells (MCF‐7) and human embryonic kidney cells (HEK‐293)). Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Compared with all standard antimicrobials, the silver nanoparticles showed higher antibacterial and antifungal activities (p ≤ 0.01). Also, the silver nanoparticles inhibited the growth of all bacteria and fungi at concentrations of 31–250 μg ml^?1, and destroyed them at concentrations of 31–500 μg ml^?1 (p ≤ 0.01). Because the silver nanoparticles obtained using aqueous extract of A. saralicum leaves have antioxidant, non‐cytotoxic, antifungal and antibacterial potentials, they can be used as a medical supplement or drug.