Thermal noise in Hg0.795Cd0.205Te detectors for large biasing fields

Thermal noise in Hg_0.795Cd_0.205Te detectors is estimated for large biasing fields at a lattice temperature of 77 K, by computing the correlation functions of the velocity fluctuations with the Monte Carlo technique. The noise temperature for current components transverse to the field is almost independent of the field, but that corresponding to the parallel component increases by a factor of about 1.3 at 50 V/cm and by a factor of 3.0 at 300V/cm. The thermal noise voltage for a detector of 85 resistance increases from 0.6nV/Hz^1/2 at low biasing fields to about 3nV/Hz^1/2 at a field of 300 V/cm. The noise power is also found to remain constant up to about 75 GHz, and it decreases thereafter by a factor of 0.25 for doubling of the frequency.     

Differential thermal analysis studies on the kinetics of crystallization of calcium tungstate from solutions in sodium tungstate melts

The kinetics of calcium tungstate crystallization from solutions in sodium tungstate melts were studied in a platinum crucible by continuous cooling from an initial crystallization temperatureT ₀=800 to 1000 to below the eutectic temperature at cooling ratesR _T=0.67 to 3.3 min^–1. The main crystal growth was diffusion rate-controlled. The diffusion rate-constant (k _D) values for the growth along the major axis were estimated. Such values increased with the cooling rate and initial crystallization temperature. They were lower than those for diffusion-controlled growth of calcium tungstate from sodium tungstate melts in alumina crucibles. The experimentalk _D values were compared with the theoreticalk _D values.

---

Zusammenfassung Die Kinetik der Kristallisation von Calciumwolframat aus Lösungen von Natriumwolframatschmelzen wurde im Platintiegel durch kontinuierliches Kühlen von der AnfangskristallisationstemperaturT ₀=800 bis 1000 bis unter die eutektische Temperatur, bei Abkühlgeschwindigkeiten vonR _T =0.67 bis 3.3 min^–1, untersucht. Das Hauptkristallwachstum wurde durch die Diffusionsgeschwindigkeit bedingt. Die Werte der Diffusionsgeschwindigkeitskonstante (k _D) in Richtung der Hauptachse wurden geschÄtzt. Diese Werte nahmen mit der Abkühlgeschwindigkeit und der Anfangskristallisationstemperatur zu. Sie waren niedriger als jene des diffusionsbedingten Wachstums von Calciumwolframat aus Natriumwolframatschmelzen in Aluminiumtiegeln. Die experimentellenk _D-Werte wurden mit den theoretischenk _D-Werten verglichen.

---

Résumé La cinétique de la cristallisation du tungstate de calcium à partir de ses solutions dans le tungstate de sodium fondu a été étudiée dans un creuset de platine au cours du refroidissement continu depuis la température initiale de cristallisationT ₀=800 à 1000 C jusqu'à température inférieure à celle de l'eutectique, avec des vitesses de refroidissement allant de 0.67 à 3.3 C · min^–1. La croissance des cristaux est contrÔlée principalement par le processus de diffusion. Les valeurs de la constante de vitesse de diffusion (k _D) ont été estimées pour la croissance le long de l'axe principal. Ces valeurs augmentent avec la vitesse de refroidissement et la température initiale de cristallisation et sont plus faibles que les valeurs correspondantes en creusets d'alumine. Les valeurs expérimentales et théoriques dek _D sont comparées.

---

₀=800 1000 R =0.67 3.3 ^–1. . (k _d ) . . , - . k _d .

     

On the electronic energy spectrum of disordered systems

The present paper deals with the investigation of the electronic energy spectrum of a one-dimensional model of monatomic disordered systems with rectangular-well type atomic potentials. First, an equation describing the connection between the wavefunctions at three consecutive atomic sites is derived, the method followed for this purpose being based on the use of well-known “transfer matrix” together with an approach reported earlier by the author. This connection equation is further analysed with the help of continued fraction methods as well as a perturbational approach (first used by Phariseau), and explicit equations, giving allowed electronic energies for various one-dimensional models with small deviations from periodicity, are obtained thereby. It is found in general that, for the types of disorder considered here, a band structure of electronic energies exists; in addition, there appear extra localised energy levels. The treatments involving continued fractions show that such extra energies lie unambiguously within the forbidden regions of the band structure, while the extra energies obtained with the help of perturbational approach, are seen to have the possibility of lying both in the allowed and forbidden regions. With regard to localisation of electronic states, we have found that, for all tratments, the electronic states other than those giving the band structure are localised. As for the band states Phariseau's approach predicts them to be localised, while the continued fraction methods fail to predict whether the band states are localised or not.     

The Extracts of Polygonum cuspidatum Root and Rhizome Block the Entry of SARS-CoV-2 Wild-Type and Omicron Pseudotyped Viruses via Inhibition of the S-Protein and 3CL Protease

COVID-19, resulting from infection by the SARS-CoV-2 virus, caused a contagious pandemic. Even with the current vaccines, there is still an urgent need to develop effective pharmacological treatments against this deadly disease. Here, we show that the water and ethanol extracts of the root and rhizome of Polygonum cuspidatum (Polygoni Cuspidati Rhizoma et Radix), a common Chinese herbal medicine, blocked the entry of wild-type and the omicron variant of the SARS-CoV-2 pseudotyped virus into fibroblasts or zebrafish larvae, with IC₅₀ values ranging from 0.015 to 0.04 mg/mL. The extracts were shown to inhibit various aspects of the pseudovirus entry, including the interaction between the spike protein (S-protein) and the angiotensin-converting enzyme II (ACE2) receptor, and the 3CL protease activity. Out of the chemical compounds tested in this report, gallic acid, a phytochemical in P. cuspidatum, was shown to have a significant anti-viral effect. Therefore, this might be responsible, at least in part, for the anti-viral efficacy of the herbal extract. Together, our data suggest that the extracts of P. cuspidatum inhibit the entry of wild-type and the omicron variant of SARS-CoV-2, and so they could be considered as potent treatments against COVID-19.     

Kinetics of crystal growth of strontium tungstate from solutions in sodium tungstate melts by continuous cooling

The crystallisation kinetics of strontium tungstate from unstirred saturated solutions in sodium tungstate melts was studied by continuous cooling from initial crystallisation temperatures T₀ = 1000° to 800°C to room temperature at cooling rates R_T = 0.67° to 3.3°C min⁻¹. The main crystal growth was diffusion rate-controlled; the final crystal growth was rate-controlled by the development rate of excess solute concentration. The estimated diffusion rate constant (k_D) values increased with cooling rates and initial crystallisation temperatures. They are higher than the rate constants for diffusion-controlled growth of calcium tungstate from sodium tungstate melts, but very much smaller than those for strontium tungstate from lithium chloride melts.     

Evolution of Artificial Arginine Analogues—Fluorescent Guanidiniocarbonyl-Indoles as Efficient Oxo-Anion Binders

In this article, we present fluorescent guanidiniocarbonyl-indoles as versatile oxo-anion binders. Herein, the guanidiniocarbonyl-indole (GCI) and methoxy-guanidiniocarbonyl-indole (MGCI) were investigated as ethylamides and compared with the well-known guanidiniocarbonyl-pyrrole (GCP) concerning their photophysical properties as well as their binding behavior towards oxo-anions. Hence, a variety of anionic species, such as carboxylates, phosphonates and sulfonates, have been studied regarding their binding properties with GCP, GCI and MGCI using UV-Vis titrations, in combination with the determination of the complex stoichiometry using the Job method. The emission properties were studied in relation to the pH value using fluorescence spectroscopy as well as the determination of the photoluminescence quantum yields (PLQY). Density functional theory (DFT) calculations were undertaken to obtain a better understanding of the ground-lying electronic properties of the investigated oxo-anion binders. Additionally, X-ray diffraction of GCP and GCI was conducted. We found that GCI and MGCI efficiently bind carboxylates, phosphonates and sulfonates in buffered aqueous solution and in a similar range as GCP (K_ass ≈ 1000–18,000 M⁻¹, in bis-tris buffer, pH = 6); thus, they could be regarded as promising emissive oxo-anion binders. They also exhibit a visible fluorescence with a sufficient PLQY. Additionally, the excitation and emission wavelength of MGCI was successfully shifted closer to the visible region of the electromagnetic spectrum by introducing a methoxy-group into the core structure, which makes them interesting for biological applications.     

Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect

In this brief report, we demonstrate that Kerr effect measurements, which determine the excess birefringence contributed by polymer solutes in dilute solutions observed under a strong electric field, are highly sensitive to and capable of determining their microstructures, as well as their locations along the macromolecular backbone. Specifically, using atactic triblock copolymers with the same overall composition of styrene (S) and p-bromostyrene (pBrS) units, but with two different block arrangements, that is, pBrS₉₀-b-S₁₂₀-b-pBrS₉₀ (I) and S₆₀-b-pBrS₁₈₀-b-S₆₀ (II), which are indistinguishable by NMR, we detected a dramatic difference in their molar Kerr constants (_mK), in agreement with those previously estimated. Although similar in magnitude, their Kerr constants differ in sign, with _mK(II) positive and _mK(I) negative. In addition, S/pBrS random and gradient copolymers synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization exhibit a heretofore unexpected enhanced enchainment of racemic (r) pBrS-pBrS diads. Comparison of their observed and calculated _mKs suggests that the gradient S/pBrS copolymers possess an unanticipated additional gradient in stereosequence that parallels their comonomer gradient, that is, as the concentration of pBrs units decreases from one end of the copolymer chain to the other, so does the content of r diads. This conclusion could only be reached by comparison of observed and calculated Kerr effects, which access the global properties of macromolecules, and not NMR, which is only sensitive to local polymer structural environments, but not to their locations on the copolymer chains. Molar Kerr constants are characteristic of entire polymer chains and are highly sensitive to their constituent microstructures and their distribution along the chain. They may be used to both identify constituent microstructures and locate them along the polymer chain, thereby enabling, for the first time, characterization of their complete macrostructures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Analysis of Malathion and its Breakdown Products in Aquaria Containing Golden Shiners (N. CHRYSOLEUCAS)

Abstract

The 1-ethylmonocarboxylic acid of Malathion (MCA) was identified as a metabolite of Malathion in the gut of golden shiners (N. Chrysoleucas) (7.11 × 10²±0.66 × 10² ng/g tissue). As noted in the literature the rate of hydrolysis of Malathion above pH 7 is first order with respect to Malathion and pH dependent. In addition, the rate of hydrolysis of Malathion in aquaria housing these fish was found to be dependent on the concentration of Ca⁺²; sparging the aquaria with air affected the rate. Some of the hydrolysis products of Malathion were identified by gc/ms and found to be pH dependent above pH 7. The half-life of Malathion under different conditions, the identification of some hydrolytic products and a general scheme for the analysis of Malathion, along with some of its metabolic and hydrolytic products are included in this paper.     

Phase Transfer Catalyzed Anomeric Nucleophilic Substitutions with D-Xylopyranosyl Halides

Abstract

Anomeric pairs of per-O-acetylated-D-xylopyranosyl halides were individually treated with a wide variety of nucleophiles under mild PTC conditions. Thus, 2,3,4-tri-O-acetyl-α-D-xylopyranosyl bromide 1 provided exclusively the β-D-xylopyranosyl anomers 2-11 in good to excellent yields (65-95%). Alternatively, under the same PTC conditions, 2,3,4-tri-O-acetyl-β-D-xylopyranosyl chloride 13 afforded solely the inverted α-D-anomers 15 (82%) and 16 (67%) upon treatment with thiophenol and sodium azide, respectively. Similarly, 2,3,4,6-tetra-O-acetyl-β-D-glucopyranosyl chloride 19 provided the analogous products 20 (63%) and 21 (31%) upon treatment with thiophenol and sodium azide. In the presence of tetrabutylammonium chloride as PTC catalyst, β-xylopyranosyl chloride 13 was shown to slowly equilibrate to the α-chloride 14. Therefore, care must be taken to avoid PTC catalyst for which counter anions can cause anomerization of the starting glycosyl halides.     

Tuning the sugar‐response of boronic acid block copolymers

A detailed study of the pH‐ and sugar‐responsive behavior of poly(3‐acrylamidophenylboronic acid pinacol ester)‐b‐poly(N,N‐dimethylacrylamide) (PAPBAE‐b‐PDMA) block copolymers is presented. Reversible addition‐fragmentation chain transfer (RAFT) polymerization of the pinacol ester of 3‐acrylamidophenylboronic acid resulted in homopolymers with molecular weights between 12,000 and 37,000 g/mol. The resulting homopolymers were employed as macro‐chain transfer agents during the polymerization of N,N‐dimethylacrylamide (DMA). Successful chain extension and removal of the pinacol protecting groups to yield poly(3‐acrylamidophenylboronic acid)‐b‐PDMA (PAPBA‐b‐PDMA) with free boronic acid moieties resulted in pH‐ and sugar‐responsive block copolymers that were subsequently investigated for their behavior in aqueous solution. The PAPBA‐b‐PDMA block copolymers were capable of solution self‐assembly due to the PAPBA block being water‐insoluble below its pK_a. The resulting aggregates were demonstrated to solubilize and release model hydrophobic compounds, as demonstrated by fluorescence studies. Dissociation of the aggregates was induced by raising the pH above the pK_a of the boronic acid residues or by adding sugars capable of forming boronate esters. Aggregate size, dissociation kinetics, and the effect of various sugars were considered. The critical sugar concentration needed to induce aggregate dissociation was tuned by incorporation of hydrophilic DMA units within the PAPBA responsive segment to yield PDMA‐b‐poly(3‐acrylamidophenylboronic acid‐co‐DMA) block copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012