Dielectric relaxation of Tripropylene glycol–water mixture using time domain reflectometry

The complex permittivity spectra of tripropylene glycol and water solutions have been obtained by time domain reflectometry (TDR) technique in the frequency range from 10 MHz to 30 GHz and the temperature range 20°C–05°C. The dielectric relaxation parameters such as static dielectric constant and relaxation time were obtained by using the non-linear least square fit method. The intermolecular hydrogen bonding of tripropylene glycol–water has been discussed using the Kirkwood correlation factor and thermodynamic parameters. The activation energy decreases with increase in water content in the mixture as expected in the Arrhenius behaviour. The dielectric constant for mixtures has been fitted to the Bruggeman mixture formula in the non-linear case.     

Dye-dependent studies on droplet pattern and electro-optic behaviour of polymer dispersed liquid crystal

In order to study the droplet pattern and electro-optic (EO) behaviour of polymer dispersed liquid crystal (PDLC) with the addition of dye, dichroic polymer dispersed liquid crystal (DPDLC) films were prepared using a nematic liquid crystal (NLC), photo-curable polymer (NOA 65) and anthraquinone blue dichroic dye (B2), in equal ratio (1:1) of polymer and liquid crystal (LC) by polymerisation induced phase separation (PIPS) technique. Dichroic dye was taken in different concentration (wt./wt. ratio) as 0.0625%, 0.125%, 0.25%, 0.5% and 1% of the LC mixture in DPDLC films. Initially, in an open circuit when there is no proviso for external electric field (0 V), LC droplets in polymer matrix exhibited bipolar pattern, though on closing the circuit with the increase of electric field pattern of droplets starts changing, LC molecules align along the direction of applied electric field and aligned completely relatively at higher field (30 V), which illustrate vertical radial pattern. Further, results show that the DPDLC film containing 0.0625% dye concentration with consistent average droplet size ~4.30 μm, exhibits the best transmission at lower operating voltage.     

Improved Performance of an Amperometric Biosensor with Polydiaminonaphthalene on Electrochemically Deposited Au Nanoparticles

The performance of an enzyme sensor fabricated through covalent bond formation on the HRP‐bonded poly(1,8‐diaminonaphthalene) (polyDAN) layer with gold nanoparticles (AuNPs) was applied to catalyze the electrochemical reduction of H₂O₂. The surface characteristics of the sensor probe were studied using cyclic voltammetry, SEM, XPS, QCM, and impedance spectroscopy. The AuNP‐deposited surface resulted in higher conductivity and sensitivity for H₂O₂ detection in phosphate buffer solution. A linear calibration plot was obtained in the H₂O₂ concentration range between 10.0 μM and 25.0 mM with detection limit 5.0±1.25 μM. The lifetime of HRP/polyDAN/AuNP/GC probe was over 70 days without response loss.     

Towards the catalytic formation of α,β-vinylesters and alkoxy substituted γ-lactones

A facile, one pot, high yield synthesis of α,β-vinylester (1-14) and alkoxy substituted γ-lactones (15-28) has been achieved by the photochemical reaction of terminal acetylene (ferrocenyl phenyl trimethylsillyl, hexyl and cyclohexyl) with alcohol (methanol, ethanol and isopropanol) and carbon monoxide in presence of iron pentacarbonyl as a catalyst. The selectivity of the compounds depends on the time of photolysis of the reaction as well as the solvent used. A stable reaction intermediate ferrole was isolated, and further photolysis with alcohols, resulted in the formation of α,β-vinylester. All the compounds were fully characterised by spectroscopic methods and the molecular structures of compounds 1, 16, 17 and 20 were established crystallographically.     

Sonoassisted Microbial Reduction of Chromium

This study presents sonoassisted microbial reduction of hexavalent chromium (Cr(VI)) using Bacillus sp. isolated from tannery effluent contaminated site. The experiments were carried out with free cells in the presence and absence of ultrasound. The optimum pH and temperature for the reduction of Cr(VI) by Bacillus sp. were found to be 7.0 and 37 °C, respectively. The Cr(VI) reduction was significantly influenced by the electron donors and among the various electron donors studied, glucose offered maximum reduction. The ultrasound-irradiated reduction of Cr(VI) with Bacillus sp. showed efficient Cr(VI) reduction. The percent reduction was found to increase with an increase in biomass concentration and decrease with an increase in initial concentration. The changes in the functional groups of Bacillus sp., before and after chromium reduction were observed with FTIR spectra. Microbial growth was described with Monod and Andrews model and best fit was observed with Andrews model.     

First principles calculations of armchair graphene nanoribbons interacting with Cu atoms

We have investigated the electronic properties of bare, H-terminated, Cu-terminated and Cu-doped armchair graphene nanoribbons (AGNRs) using ab-initio approach. We found that H-termination enhances the stability and band gap whereas H extraction introduces dangling bands and lowers the band gap making bare ribbons indirect band gap semiconductors. The calculations revealed that strong hybridization between Cu atoms and AGNRs, lessen the band gap for Cu-terminated ribbons and gives rise to metallicity in Cu-doped AGNRs irrespective of their widths. Formation energy of considered ribbons yield that H-terminated AGNRs with lowest formation energy are most energetically favored, next are one edge Cu-terminated ribbons followed by bare ones whereas both edges Cu-doped ribbons are least energetically plausible. We predict that presence of Cu atoms in GNRs, significantly alter the band gap and can be used in band gap engineering of nanoribbons.     

Investigations of magnetic and dielectric properties of cupric oxide nanoparticles

Cupric oxide nanoparticles of ∼8-10 nm width and 40-45 nm length self assembled as large particles ∼1-1.5 μm have been investigated, in the 10-325 K temperature range, using magnetic and dielectric measurements. In magnetic measurements a single broad peak at ∼230 K in a zero field cooled sample has been observed. Coercivity, in magnetization measurements at 10 K, suggests that the nanoparticles are core-shell type particles with an antiferromagnetic core and a ferromagnetic shell. Dielectric measurements, at various frequencies from 3.7 Hz to 949 kHz, exhibit a sharp peak at 284 K followed by weak anomalies around 213 and 230 K.     

Synthesis and characterization of LaB6 thin films on tungsten, rhenium, silicon and other substrates and their investigations as?field emitters

The paper deals with the comparative study of nanocrystalline Lanthanum hexaboride (LaB₆) thin films grown on various substrates by Pulsed laser deposition and Arc plasma method. Field emission studies were carried out on LaB₆ films deposited on various substrates show metallic behavior of the emitters. The high value of field enhancement factors, indicating that the electron emission from LaB₆ nanoscale protrusions deposited on emitter surface. The post field emission surface morphology of the emitters showed no significant erosion of the films during continuous operation. The observed behavior indicates that it is linked with the growth of LaB₆ films on substrate crystal structure. The LaB₆ nanocrystallites/nanowires films were synthesized using arc plasma method shows good emission current stability. The LaB₆ micro/nanocrystallites were also obtained by picosecond laser irradiation which gives high enhancement β factor, and good emission current stability along with high current density. The results reveal that nanocrystalline LaB₆ films, exhibit high resistance to ion bombardment and excellent structural stability and are more promising emitters for practical applications in field emission based new generation devices.     

A multicriteria optimization model of portfolio rebalancing with transaction costs in fuzzy environment

In this paper we propose multicriteria credibilistic framework for portfolio rebalancing (adjusting) problem with fuzzy parameters considering return, risk and liquidity as key financial criteria. The portfolio risk is characterized by a risk curve that represents each likely loss of the portfolio return and the corresponding chance of its occurrence rather than a single pre-set level of the loss. Furthermore, we consider an investment market scenario where, at the end of a typical time period, the investor would like to modify his existing portfolio by buying and/or selling assets in response to changing market conditions. We assume that the investor pays transaction costs based on incremental discount schemes associated with the buying and/or selling of assets, which are adjusted in the net return of the portfolio. A hybrid intelligent algorithm that integrates fuzzy simulation with a real-coded genetic algorithm is developed to solve the portfolio rebalancing (adjusting) problem. The proposed solution approach is useful particularly for the cases where fuzzy parameters of the problem are characterized by general functional forms.