Numerical investigation of flow boiling characteristics of water in a rectangular microchannel

Journal of Thermal Analysis and Calorimetry - In the case of flow boiling, the prediction of vapour fraction in the horizontal microchannel is a severe issue using the numerical technique....     

Ferrocenyl,Alkyl, and Aryl‐Pyrido[2,3‐d]Pyrimidines as Vasorelaxant of Smooth Muscle of Rat Aorta via cAMP Conservation Through Phosphodiesterase Inhibition

New pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , and 21 have been synthesized. The vasorelaxant effect on smooth muscle isolated from rat aorta, via PDEs inhibition, of these compounds along with other pyrido[2,3‐d]pyrimidines 14 , 15 , 16 , 17 , 18 , 19 , 20 reported earlier by our group, has also been determined. These pyrido[2,3‐d]pyrimidines 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 were synthesized by the reaction of ferrocenyl‐ethynyl ketones ( 1 , 2 , 3 , 4 ) or α‐alkynyl ketones ( 5 , 6 , 7 , 8 , 9 , 10 ) with 6‐amino‐1,3‐dimethyluracil using [Ni(CN)₄]^?4 as an active catalytic species, formed in situ in a Ni(CN)₂/NaOH/H₂O/CO/KCN aqueous system. Evaluation of the vasorelaxant effect of compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 demonstrated that all compounds relax the tissue in a concentration‐dependent manner. The structural changes do not alter the effectiveness; however, there are differences related to potency expressed as EC₅₀. Compounds 12 (7‐ferrocenyl‐1,3‐dimethyl‐5‐(m‐tolyl)‐pyrido[2,3‐d]pyrimidine) and 13 (7‐ferrocenyl‐1,3‐dipropyl‐5‐(4‐metoxyphenyl)‐pyrido[2,3‐d]pyrimidine) were the most potent compounds, even more than rolipram, reference drug; the EC₅₀ was 0.41 ± 0.02 μM and 0.81 ± 0.11 μM for 12 and 13 , correspondingly. The EC₅₀ of compounds 15 (7‐ferrocenyl‐1,3‐dimethyl‐5‐phenyl‐pyrido[2,3‐d]pyrimidine), 14 (7‐ferrocenyl‐5‐(3,5‐dimethoxyphenyl)‐1,3‐dimethylpyrido[2,3‐d]pyrimidine), and 19 (5‐n‐butyl‐7‐ethyl‐1,3‐dimethylpyrido[2,3‐d]pyrimidine) was similar to EC₅₀ of rolipram. Compounds 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 significantly induce concentration‐dependent vasorelaxation in endothelium‐intact aortic rings. In addition, the relaxation responses to each compound in either endothelium‐intact or endothelium denuded aortic rings were comparable, suggesting that removal of the functional endothelium has no significant influence on its intrinsic vasorelaxant activity. In vitro capability of conserving cyclic‐AMP or cyclic‐GMP (adenosine and guanosine 3′, 5′‐cyclic monophosphate) via PDE inhibition for compounds 12 , 13 , 14 , 15 and 19 was evaluated. Compounds 15 and 19 show the highest percent inhibition effect (94.83% and 83.98%, respectively) for the decomposition of c‐AMP. Docking studies showed that the compound 15 was selective for the inhibition of PDE‐4.     

Dye-dependent studies on droplet pattern and electro-optic behaviour of polymer dispersed liquid crystal

In order to study the droplet pattern and electro-optic (EO) behaviour of polymer dispersed liquid crystal (PDLC) with the addition of dye, dichroic polymer dispersed liquid crystal (DPDLC) films were prepared using a nematic liquid crystal (NLC), photo-curable polymer (NOA 65) and anthraquinone blue dichroic dye (B2), in equal ratio (1:1) of polymer and liquid crystal (LC) by polymerisation induced phase separation (PIPS) technique. Dichroic dye was taken in different concentration (wt./wt. ratio) as 0.0625%, 0.125%, 0.25%, 0.5% and 1% of the LC mixture in DPDLC films. Initially, in an open circuit when there is no proviso for external electric field (0 V), LC droplets in polymer matrix exhibited bipolar pattern, though on closing the circuit with the increase of electric field pattern of droplets starts changing, LC molecules align along the direction of applied electric field and aligned completely relatively at higher field (30 V), which illustrate vertical radial pattern. Further, results show that the DPDLC film containing 0.0625% dye concentration with consistent average droplet size ~4.30 μm, exhibits the best transmission at lower operating voltage.     

Structural insight into the inactivation of <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis> non-classical transpeptidase Ldt<Subscript>Mt2</Subscript> by biapenem and tebipenem

Background

The carbapenem subclass of β-lactams is among the most potent antibiotics available today. Emerging evidence shows that, unlike other subclasses of β-lactams, carbapenems bind to and inhibit non-classical transpeptidases (L,D-transpeptidases) that generate 3 → 3 linkages in bacterial peptidoglycan. The carbapenems biapenem and tebipenem exhibit therapeutically valuable potencies against Mycobacterium tuberculosis (Mtb).

Results

Here, we report the X-ray crystal structures of Mtb L,D-transpeptidase-2 (Ldt_Mt2) complexed with biapenem or tebipenem. Despite significant variations in carbapenem sulfur side chains, biapenem and tebipenem ultimately form an identical adduct that docks to the outer cavity of Ldt_Mt2. We propose that this common adduct is an enzyme catalyzed decomposition of the carbapenem adduct by a mechanism similar to S-conjugate elimination by β-lyases.

Conclusion

The results presented here demonstrate biapenem and tebipenem bind to the outer cavity of Ldt_Mt2, covalently inactivate the enzyme, and subsequently degrade via an S-conjugate elimination mechanism. We discuss structure based drug design based on the findings and propose that the S-conjugate elimination can be leveraged to design novel agents to deliver and locally release antimicrobial factors to act synergistically with the carbapenem carrier.

     

Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.     

High-performance thin-layer chromatography method for the quantification of quetiapine fumarate and its related genotoxic impurities using green solvents

A novel high-performance thin-layer chromatographic (HPTLC) analytical method has been developed and optimized for the quantification of quetiapine fumarate (QF) and its two genotoxic impurities in drug substance and drug product. The desired separation was achieved on 60F₂₅₄ pre-coated HPTLC plates using combination of green solvents, ethyl acetate‒ethanol‒n-heptane (5:1:4, V/V) as developing solvents. The detection wavelength used for quantification was 229 nm. QF and its two related genotoxic impurities, namely, 2-chloroaniline and 2-aminodiphenylsulfide, were well resolved from one another with retention factor values of 0.13 ± 0.02, 0.57 ± 0.02 and 0.76 ± 0.02, respectively. The optimized method was validated according to the guidelines laid down by the International Council for Harmonisation. The linearity was determined in the range of 100–600 ng/spot for QF and 10‒60 ng/spot for its two related genotoxic impurities; R² ≥ 0.993. The method exhibited precision along with good accuracy, where 0.51, 0.86 and 1.86. The percentage recoveries obtained for 2-chloroaniline and 2-aminodiphenylsulfide were 99.04‒101.04%. The developed method can be successfully used for the analysis of drug samples.

     

Zirconium-Based Metal Organic Frameworks for the Capture of Carbon Dioxide and Ethanol Vapour. A Comparative Study

This paper reports on the comparison of three zirconium-based metal organic frameworks (MOFs) for the capture of carbon dioxide and ethanol vapour at ambient conditions. In terms of efficiency, two parameters were evaluated by experimental and modeling means, namely the nature of the ligands and the size of the cavities. We demonstrated that amongst three Zr-based MOFs, MIP-202 has the highest affinity for CO₂ (−50 kJ·mol⁻¹ at low coverage against around −20 kJ·mol⁻¹ for MOF-801 and Muc Zr MOF), which could be related to the presence of amino functions borne by its aspartic acid ligands as well as the presence of extra-framework anions. On the other side, regardless of the ligand size, these three materials were able to adsorb similar amounts of carbon dioxide at 1 atm (between 2 and 2.5 µmol·m⁻² at 298 K). These experimental findings were consistent with modeling studies, despite chemisorption effects, which could not be taken into consideration by classical Monte Carlo simulations. Ethanol adsorption confirmed these results, higher enthalpies being found at low coverage for the three materials because of stronger van der Waals interactions. Two distinct sorption processes were proposed in the case of MIP-202 to explain the shape of the enthalpic profiles.     

Greener approach toward synthesis of biologically active s-Triazine (TCT) derivatives: A recent update

The greener methodology to synthesize s-triazine derivatives (also known as TCT) is described, including synthesis through microwave, ultrasound, and solvent-free conditions. This review mainly focuses on reactions of TCT (2,4,6-trichloro-1,3,5-triazine) with various substituents having amine and hydroxy functionalities to give corresponding triazine derivatives under a greener approach. The results of reactions indicate that, unlike classical methods, green methods result in better yields of the product, through a rapid reaction, under mild reaction conditions, and by easy workup procedures.     

Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface,Stoichiometry, and Stability

MXenes, due to their tailorable chemistry and favourable physical properties, have great promise in electrocatalytic energy conversion reactions. To exploit fully their enormous potential, further advances specific to electrocatalysis revolving around their performance, stability, compositional discovery and synthesis are required. The most recent advances in these aspects are discussed in detail: surface functional and stoichiometric modifications which can improve performance, Pourbaix stability related to their electrocatalytic operating conditions, density functional theory and advances in machine learning for their discovery, and prospects in large scale synthesis and solution processing techniques to produce membrane electrode assemblies and integrated electrodes. This Review provides a perspective that is complemented by new density functional theory calculations which show how these recent advances in MXene material design are paving the way for effective electrocatalysts required for the transition to integrated renewable energy systems.