H3PO4/Zr(OH)4高效促进NBS对取代烷基苯的亲电溴代

使用固体酸H3PO4/Zr(OH)4催化NBS对取代烷基苯进行苯环溴代反应.根据不同取代烷基苯的反应活性,在乙腈中,高产率(79%～96%)地得到了相应的苯环单溴代产物,同时反应体系中无苄位溴代的副产物生成.在反应过程中,固体酸催化剂可以重复使用多次.     

新型β-二酚卟啉光敏剂合成及其与DNA作用

以β-硝基卟啉为原料,分别与2,3-萘二酚或邻苯二酚直接反应,制备了6个新型β-二酚取代卟啉光敏药物,通过UV,~1H NMR,IR,MS,元素分析等手段对化合物进行了结构表征并初步探讨了反应机理.DNA凝胶电泳实验表明,该类光敏剂对pBR322质粒DNA具有很好的光敏切割作用,作为光敏剂或其前体具有很好的应用前景.     

荧光光谱法测定奶制品中的三聚氰胺

三聚氰胺能够与荧光素在水溶液中发生作用,使荧光素的荧光强度增强,且在一定浓度范围内,荧光强度与三聚氰胺的浓度成线性关系,据此建立了一种新的测定奶制品中三聚氰胺的荧光分析方法。方法的回归方程为ΔI=178.2ρ(10-6g/L),r=0.9977,线性范围5.00×10-7~1.00×10-5g/L,RSD为1.9%(n=10),检出限为9.85×10-8g/L。采用该方法测定奶粉和液态奶中三聚氰胺的含量,测得的平均回收率分别为95.1%和95.8%。     

三聚氰胺与鯡鱼精DNA相互作用研究

采用UV、荧光光谱、电化学和粘度法等方法研究了三聚氰胺(MM)与鲱鱼精DNA的作用机制, 并采用凝胶电泳考察了MM对pBR322质粒DNA迁移作用的影响. 当pH为7.0时, 动力学参数的计算结果表明: 加入DNA前后MM电荷转移系数α分别为0.27和0.26, 速率常数k_s分别为5.58 s^-1和5.65 s^－1; 热力学研究表明MM与DNA的结合常数K约为10⁵ mol^－1•L, MM与DNA可能是以沟槽式相结合.     

CdS修饰TiO2纳米带制备及光催化降解有毒有机污染物

以硫酸钛为原料,在210℃低温下,水热制备TiO₂纳米带.通过沉淀法用CdS修饰TiO₂纳米带表面,制得TiO₂@CdS复合光催化剂,采用XRD、TEM和反射紫外对其结构及光化学特性进行初步表征.以可见光(λ≥450 nm)光催化降解罗丹明B(Rhodamine B,RhB)、水杨酸(Salicylic Acid,SA)及2,4-二氯苯酚(2,4-Dichlorophenol,2,4-DCP)为探针反应,研究反应温度、介质和负载CdS对TiO₂@CdS结构性能的影响.结果表明,所制备的TiO₂纳米带分散性好.复合粉末由锐钛矿相TiO₂和立方相CdS组成.常温25℃中性介质中用CdS修饰的TiO₂的活性,在可见光照射下,为单纯TiO₂纳米带的29倍.同时,TiO₂也促进了CdS可见光光催化活性的提高.通过跟踪降解体系紫外-可见光谱(UV-vis)、红外光谱(FTIR)和总有机碳(TOC)测定,结果发现TiO₂@CdS/vis体系在pH 7.0时,对SA的降解率较TiO₂纳米带有显著地提高,反应15 h和21 h后,RhB和2,4-DCP的矿化率分别可达到47.8%和30.8%.     

用稳定自由基聚合及光引发聚合制备嵌段共聚物

介绍了稳定自由基聚合的反应原理、引发剂设计，以及用稳定自由基聚合制备嵌段共聚物的几种方法：连续加料法、双官能团引发剂法和一步法。对于光引发聚合的原理及硫自由基的稳定性对聚合反应的影响也进行了讨论。     

内噪声作用下的随机共振算法对弱信号的检测

基于随机共振理论提出了一种简便、有效地检测弱信号的方法。在内噪声协同作用下，通过调节输入噪声信号的大小能较好地提高系统输出信号的信噪比，从而实现检测背景噪声很强的弱信号的目的。应用于模拟信号和实验信号的结果证明了方法是可行的。     

Electrocatalytic oxidation of methanol at platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes

<正>The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bare platinum electrode,the results showed that the modified electrode had excellent electrocatalytic activity for the oxidation of methanol;the oxidation peak potential shifted more negatively and the peak current increased about twenty times.The electrooxidation of methanol at the modified electrode with Eu-Fe cyanide-bridged binuclear complexes material exhibited the better tolerance capacity to poison of intermediate species;the peak current was proportional to the concentration of methanol in the range of 0.5-2.0mol/L (R~2 = 0.9991,n =7),which was a comparatively wider linear range.Moreover,based on the linear relationship between the peak current and the square root of scan rate,electrocatalytic oxidation process of methanol was confirmed to be a diffusion control process.Furthermore,according to the counting of electron transfer number(n_α) in the rate-limiting step and the slope of linear equation between acidity of electrolyte and the oxidation peak potential(E_p),the possible mechanism of the electrooxidation of methanol at the modified electrode was primarily discussed.     

Oxidative coupling of methane in a dual-bed reactor comprising of particle/cordierite monolithic catalysts

A dual-bed reactor was constructed comprising of a 5%Na2WO4-2%Mn/SiO2 particle catalyst and a 4%Ce-5%Na2WO4-2%Mn/SiO2/cordierite monolithic catalyst. The reaction performance of the oxidative coupling of methane (OCM) over the dual-bed reactor system was evaluated. The effects of the bed height and operation mode, as well as the reaction parameters such as reaction temperature, CH4/O2 ratio and flowrate of feed gas, on the catalytic performance were investigated. The results indicated that the suggested dual-bed reactor exhibited a good performance for the OCM reaction when the feed gases firstly passed through the particle catalyst bed and then to the monolithic catalyst bed. A CH4 conversion of 38.2% and a C2H4 selectivity of 43.3% could be obtained using the dual-bed reactor with a particle catalyst bed height of 10 mm and a monolithic catalyst bed height of 50 mm. Both the CH4 conversion and C2H4 selectivity have increased by 2.5% and 12.8%, respectively, as compared with the 5%Na2WO4-2%Mn/SiO2 particle catalyst in a conventional single-bed reactor and by 12.9% and 23.0%, respectively, as compared with the 4%Ce-5%Na2WO4-2%Mn/SiO2/cordierite monolithic catalyst in a single-bed reactor. The catalytic performance of the OCM in the dual-bed reactor system has been improved remarkably.     

Homoleptic dirhodium tetraoctanoate and its pyridine adduct: synthesis and crystal structures

Dirhodium tetraoctanoate (1), without any exogenous axial ligands, has been obtained in crystalline form by slow evaporation from ethanol. The molecules are linked by axially ligating each other to form infinite chains, which is similar to the only other two structurally characterized rhodium(II) carboxylates, Rh₂(O₂CCF₃)₄ and Rh₂(O₂CC₃H₇)₄, which also lack exogenous axial ligands. The infinite chains of 1 are cleaved by strong donor solvents such as pyridine to produce the corresponding pyridine adduct (2). Both the complexes were characterized by elemental analysis, MS, IR and NMR spectra.