Overexpression of Δ12-Fatty Acid Desaturase in the Oleaginous Yeast <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> for Production of Linoleic Acid-Rich Lipids

Under nutrient-limited conditions, the red yeast Rhodosporidium toruloides can accumulate neutral lipids, of which the compositional fatty acids are mainly saturated and mono-unsaturated ones with 16 or 18 carbon atoms. To improve the linoleic acid content in the lipids, we enabled galactose-inducible expression of the gene encoding Δ12-fatty acid desaturase (FADS) from Mortierella alpina or Fusarium verticillioides by integration of the corresponding expression cassettes into the genome of R. toruloides haploid and diploid strains. The relative linoleic acid content increased up to fivefold and the final linoleic acid titer reached 1.3 g/L under flask culture conditions. Our results suggested that R. toruloides may be further explored as cell factory for production of high-valued lipids and other fatty acid derivatives as bio-based chemicals and fuels.     

Calibration strategies for quantifying the Mn content of tooth and bone samples by LA-ICP-MS

There is a growing interest in using biomonitoring of tooth and bone specimens to assess human exposure to manganese (Mn). Information on historical exposure to Mn can be obtained through micro-spatial analysis of such specimens by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The principal aim of this study was to compare several calibration strategies for determining Mn content in tooth and bone by LA-ICP-MS including: (a) a six-point calibration curve based on synthesized hydroxyapatite (HA) materials, and single-point calibrations based on (b) NIST SRM 1400 Bone Ash, (c) NIST SRM 1486 Bone Meal, and (d) NIST SRM 612 Trace Elements in Glass. Performance was similar between different ICP-MS platforms (quadrupole ICP-MS, dynamic reaction cell ICP-MS, and sector field ICP-MS). Data based on calibration using the ⁵⁵Mn count rate were compared to that based on using the ⁵⁵Mn/⁴³Ca count rate ratio to obtain results as the Mn mass fraction. Reasonable performance was obtained by calibration using either SRM 612 or SRM 1400, in combination with the ⁵⁵Mn/⁴³Ca count rate ratio and using either the synthesized HA standards or SRM 1400 as calibrators, combined with ⁵⁵Mn count rate. By contrast, calibration based on SRM 1486 resulted in a systematic low bias. While there are several options for quantifying the Mn content of tooth and bone using LA-ICP-MS, users should be aware of the potential for strong matrix effects that may affect results. Overall, determining the ⁵⁵Mn/⁴³Ca count rate ratio, rather than the mass fraction, may represent a better approach for reporting the content of Mn in tooth and bone by LA-ICP-MS.     

Cellulose/poly(ethylene imine) composites as efficient and reusable adsorbents for heavy metal ions

A series of Cellulose/poly-ethylene imine (PEI) composites were prepared by grafting hyperbranched PEI onto cellulose chains in alkali/urea aqueous solvent system through “one step” method. The SEM results showed that the Cellulose/PEI composite maintained porous structure. The Cellulose/PEI composites were tested as Cu(II) adsorbents through thermodynamics and kinetics study. The adsorption process followed pseudo-second-order kinetics equation. The adsorption isotherms could be described by both Langmuir and Freundlich isotherm models. The maximum adsorption amount was calculated to be 285.7 mg/g. The composites showed good stability so that they could be used in a wide range of pH and temperature. Besides, the Cu(II) loaded Cellulose/PEI composite could also be easily regenerated by dilute sulfuric acid and still keep a major adsorption capacity. Finally, the adsorption capacities of Celluloes/PEI composite towards other metal ions, such as Zn(II), Ni(II), Cr(III) and Pb(II), were also demonstrated. It will be a new high-performance and environmental friendly material for sewage disposal and metal pollution treatment with promising developmental potential.     

Structure-based approach for identification of novel phenylboronic acids as serine-β-lactamase inhibitors

β-Lactamases are bacterial enzymes conferring resistance to β-lactam antibiotics in clinically-relevant pathogens, and represent relevant drug targets. Recently, the identification of new boronic acids (i.e. RPX7009) paved the way to the clinical application of these molecules as potential drugs. Here, we screened in silico a library of ~1400 boronic acids as potential AmpC β-lactamase inhibitors. Six of the most promising candidates were evaluated in biochemical assays leading to the identification of potent inhibitors of clinically-relevant β-lactamases like AmpC, KPC-2 and CTX-M-15. One of the selected compounds showed nanomolar K _i value with the clinically-relevant KPC-2 carbapenemase, while another one exhibited broad spectrum inhibition, being also active on Enterobacter AmpC and the OXA-48 class D carbapenemase.     

Syntheses,Crystal Structures and Properties of Organic–Inorganic Hybrid Compounds of 4,4′-Bipyridine–Decorated Ni/Cu-Substituted Molybdophosphates

Organic–inorganic hybrid compounds of transition metal mono-substituted molybdophosphates, (H₂bipy)₂[PNi(Hbipy)Mo₁₁O₃₉]·4H₂O (1), (H₂bipy)_1.5[HPCu(Hbipy)Mo₁₁O₃₉]·4H₂O (2) (bipy = 4,4′-bipyridine), were synthesized hydrothermally and characterized by elemental analysis, IR spectroscopy, TGA, fluorescent spectroscopy, powder and single crystal X-ray diffraction methods. In 1 and 2 the transition metal atom (Ni and Cu) occupies one site of twelve molybdenum atoms of Keggin anion and combines a monoprotonated bipyridine molecular cation, Hbipy⁺, forming a 4,4′-bipyridine–decorated M-substituted molybdophosphate anion (M = Ni and Cu). In 1 two anions form a dimer through hydrogen bonds, in 2 the anions form a chain through hydrogen bonds. The dimers or the chains, H₂bipy²⁺ cations and lattice water molecules are connected by hydrogen bonds, giving supramolecular compounds. The two kinds of bipy molecules, coordinated and uncoordinated, in 1 and 2 give two emission peaks in their photoluminescent spectra.     

Magnetic Anisotropy of Small Ir<Subscript>n</Subscript> Clusters (n = 2–5)

We employ a noncollinear implementation of density functional theory (DFT) including spin–orbit coupling (SOC) interaction to calculate the magnetic properties of Ir_n (n = 2–5) clusters. The impact of the magnetic anisotropy on the geometric structures and magnetic properties has been analyzed. SOC leads to formation of large orbital moment and a mixing of different spin states, but does not affect the relative stability of different structural isomers for a given cluster. In order to measure the SOC effect, we further define the spin–orbit energy (E_so) and compute the exact values. Magnetic anisotropy energies (MAEs) obtained from DFT calculations are further supported by the results of torque approach. We find that MAEs of Ir₂ and Ir₃ in ground state configurations are 40.6 and 28.5 meV respectively, while the MAE decreases to 9 meV for Ir₄. For Ir₅, MAE for its ground state structure increases to 38.3 meV.     

Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.     

Recent advances in the synthesis and applications of azo initiators

This mini-review describes recent developments and trends in the area of syntheses and applications of azo compounds, which are planned to act as initiators of radical reactions, particularly polymerizations. The paper reports chemical modifications of well-known initiators (AIBN, etc.) or variants of syntheses of new types of these compounds. The chemical modifications of basic skeletons of azo initiators are discussed in the context with their properties and applications. Also discussed are the contemporary trends in the development of these initiators, particularly in preparation of microparticles and nanoparticles of polymers or hybrid inorganic–organic microparticles and nanoparticles prepared for intentional studies and applications.     

Syngas conversion beyond chemical equilibrium by in situ bimolecular reaction

An in situ bimolecular reaction, in which syngas is fed with toluene as a secondary reactant (hereafter Tol in situ methylation), was studied over bifunctional catalysts comprised of methanol synthesis catalyst and H-ZSM-5 in a fixed-bed down-flow reactor at 460 psig. When physically mixed with H-ZSM-5 to form bifunctional catalysts, CrZ_HZ (Cr₂O₃/ZnO + HZSM-5) catalyst showed much higher activity than CZA_HZ (CuO/ZnO/Al₂O₃ + H-ZSM-5) in the Tol in situ methylation, while CrZ catalyst exhibited substantially lower activity than CZA in methanol synthesis. CO conversion to methanol in the Tol in situ methylation was estimated by Bz in situ methylation. The CO conversion to methanol was calculated to be in the range of 11–27 %, while that in methanol synthesis over CrZ was about 5 % at most due to chemical equilibrium limitation. By employing a silicalite-coated H-ZSM-5 (Sil/HZ) in bifunctional catalyst, xylene selectivity and para-xylene yield were much improved in the Tol in situ methylation.     

Effect of potassium addition on bimetallic PtSn/θ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for dehydrogenation of propane to propylene

PtSn/θ-Al₂O₃ catalysts with different amounts of K (0.14, 0.22, 0.49, 0.72, and 0.96 wt%) are prepared to investigate the K effects on the PtSn catalyst in propane dehydrogenation (PDH). KPtSn catalyst with 0.xx wt% K, 0.5 wt% Pt and 0.75 wt% Sn is designated as xx-KPtSn. PDH was performed at 873 K and a gas hourly space velocity (GHSV) of 53,000 mL/g_cat h. The temperature-programmed desorption (NH₃-TPD), temperature-programmed reduction (TPR) and CO chemisorption of the KPtSn catalysts with K added revealed the potassium addition blocked the acid sites, promoted the reduction of Sn oxide and decreased the Pt dispersion. The formations of cracking products and higher hydrocarbons on acid sites were suppressed by the K effect of blocking the acid sites. In contrast, K addition at more than 0.72 wt% rather increased cracking products and the amount of coke, resulting in the severe deactivation of catalysts. The high cracking products on the KPtSn catalysts with the high amount of K should not be related to the acid sites, because the acid sites were monotonously decreased with an increase in the amount of K. Instead, the potassium affected the characteristics of PtSn. The interaction between Pt and Sn could be weakened by enriching the reduced Sn, because the K component promoted the reduction of Sn oxide in the TPR experiments. Therefore, the 14-KPtSn catalyst with the low amount of K exhibits the highest stability and selectivity among the prepared KPtSn catalysts due to the compromise of the advantageous (blocking the acid sites) and bad (weakening the interaction between Pt and Sn) effects of the K addition in PDH.