Palladium(ii) driven self-assembly of a saturated quadruple-stranded metallo helicate

Complexation of the bridging bidentate ligand N,N'-(pyridine-2,6-diyl)dinicotinamide, L with palladium(ii) resulted in a single discrete M(2)L(4) self-assembly, 1, in a quantitative manner. The entropically-controlled assembly of 1 resulted in a rare saturated, quadruple-stranded metallo-helicate, in which both the left-handed (M) and right-handed (P) helicates exist in the crystal structure.     

Intriguing H-aggregate and H-dimer formation of coumarin-481 dye in aqueous solution as evidenced from photophysical studies

Photophysical properties of coumarin-481 (C481) dye in aqueous solution show intriguing presence of multiple emitting species. Concentration and wavelength dependent fluorescence decays and time-resolved emission spectra and area-normalized emission spectra suggest the coexistence of dye monomers, dimers, and higher aggregates (mostly trimers) in the solution. Because of the efficient intramolecular charge transfer (ICT) state to twisted intramolecular charge transfer (TICT) state conversion, the dye monomers show very short fluorescence lifetime of ~0.2 ns. Fluorescence lifetimes of dimers (~4.1 ns) and higher aggregates (~1.4 ns) are relatively longer due to steric constrain toward ICT to TICT conversion. Observed results indicate that the emission spectra of the aggregates are substantially blue-shifted compared to monomers, suggesting H-aggregation of the dye in the solution. Temperature-dependent fluorescence decays in water and time-resolved fluorescence results in water-acetonitrile solvent mixtures are also in support of the dye aggregation in the solution. Though dynamic light scattering studies could not recognize the dye aggregates in the solution due to their small size and low concentration, fluorescence up-conversion measurements show a relatively higher decay tail in water than in water-acetonitrile solvent mixture, in agreement with higher dye aggregation in aqueous solution. Time-resolved fluorescence results with structurally related non-TICT dyes, especially those of coumarin-153 dye, are also in accordance with the aggregation behavior of these dyes in aqueous solution. To the best of our knowledge, this is the first report on the aggregation of coumarin dyes in aqueous solution. Present results are important because coumarin dyes are widely used as fluorescent probes in various microheterogeneous systems where water is always a solvent component, and the dye aggregation in these systems, if overlooked, can easily lead to a misinterpretation of the observed results.     

Diiminic Schiff Bases: An Intriguing Class of Compounds for a Copper‐Nanoparticle‐Induced Fluorescence Study

The condensation products of salicylaldehyde and different diamines constitute an important class of diiminic Schiff bases (DSBs). This class of compounds has been rediscovered as reducing as well as capping agents under UV irradiation. UV irradiation of alkaline DSB solutions in the presence of water‐soluble copper salts has been employed to produce copper nanoparticles (CuNPs). Intriguing CuNP‐stimulated fluorescence behavior of the solution has been observed. Depending upon the nature of the spacer in between two iminic bonds, fluorescence enhancement or quenching is observed. Such surprising fluorescence contrast has been ascribed to far‐field radiation and lossy surface waves.     

Gate‐Induced Modification of Water Adsorption on Dielectrics Probed by EFM and Carbon Nanotube FETs

Humidity plays an important role in molecular electronics. It facilitates charge movement on top of dielectric layers and modifies the device transfer characteristics. Using two different methods to probe temporal charge redistribution on the surface of dielectrics, we were able to extract the surface humidity for the first time. The first method is based on the relaxation time constants of the current through carbon nanotube field‐effect transistors (CNTFETs), and the second is based on electric force microscopy (EFM) measurements. Moreover, we found that applying external gate biases modifies the surface humidity. A theoretical model based on dielectrophoretic attraction between the water molecules and the substrate is introduced to explain this observation, and the results support our hypothesis. Furthermore, it is found that upon the adsorption of two to three layers of water the surface conductivity saturates.     

Structural and optical characterization of Ag-doped TiO2 nanoparticles prepared by a sol–gel method

Undoped and silver-doped TiO₂ nanoparticles (Ti_1?x Ag _x O₂, where x?=?0.00?C0.10) were synthesized by a sol?Cgel method. The synthesized products were characterized by X-ray diffraction (XRD), particle size analyzer (PSA), scanning electron microscope (SEM), and UV?CVisible spectrophotometer. XRD pattern confirmed the tetragonal structure of synthesized samples. Average crystallite size of synthesized nanoparticles was determined from X-ray line broadening using the Debye?CScherrer formula. The crystallite size was varied from 8 to 33?nm as the calcination temperature was increased from 300 to 800?°C. The incorporation of 3 to 5% Ag⁺ in place of Ti⁴⁺ provoked a decrease in the size of nanocrystals as compared to undoped TiO₂. The SEM micrographs revealed the agglomerated spherical-like morphology of particles. SEM, PSA, and XRD measurements show that the particles size of the powder is in nanoscale. Optical absorption measurements indicated a red shift in the absorption band edge upon silver doping. Direct allowed band gap of undoped and Ag-doped TiO₂ nanoparticles measured by UV?CVis spectrometer were 3.00 and 2.80?eV, respectively, at 500?°C.     

Method for detection of single-base mismatches using bimolecular beacons

This paper describes a method for the detection of single-base mismatches using DNA microarrays in a format that does not require labeling of the sample ("target") DNA. The method is based on disrupting fluorescence energy transfer (FRET) between a fluorophore attached to an immobilized DNA strand ("probe") and a quencher-containing sequence that is complementary except for an artificial mismatch (e.g. 5-nitroindole, 3-nitropyrole, or abasic site) at the site of interrogation. As the displacement of the FRET acceptor and hybridization of the unlabeled probe are bimolecular, the term "bimolecular beacons" is used to describe this approach. The analysis of a mismatch was based on differences in the amount of disruption in FRET upon hybridization of perfectly matched DNA targets and those containing single-base mismatches. Using this method and an oligonucleotide model system, A/C single-base mismatches were successfully discriminated at levels greater than that observed using surface-immobilized molecular beacons. The amount of discrimination was dependent on the identity of the artificial mismatch; greater discrimination was observed with 5-nitroindole (a "universal" base) than with an abasic site. G/T mismatches, considered to be particularly difficult to detect, were also successfully discriminated when quencher sequences containing 5-nitroindole were used.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Structural and functional analogue of the active site of polysulfide reductase from Wolinella succinogenes

Synthesis of [PPh4]2[Mo(SPh)2(S2C2(CN)2)2] (2) from [PPh4]2[MoO(S2C2(CN)2)2] (1) has been achieved to mimic the postulated [Mo(S)6] core of polysulfide reductase with two thiolates and two bis(ene-dithiolate) ligands. Compound 2 reacts with polysulfide to yield H2S, modeling the function of polysulfide reductase. The facile conversion of 2 back to 1 in moist solvent suggests that the interconversion of the [MoIV = O] and [MoIV - X] (X = O-Ser, S-Cys, Se-Cys) moieties might occur in the DMSO reductase class of enzymes under appropriate hydrophobic/hydrophilic conditions.     

A complete set of self‐consistent charge density‐functional tight‐binding parametrization of zinc chalcogenides (ZnX; X=O,S, Se,and Te)

We have developed a complete set of self‐consistent charge density‐functional tight‐binding parameters for Zn? X (X = Zn, O, S, Se, Te, Cd, H, C, and N). The transferability of the derived parameters has been tested against Pseudo Potential‐Perdew, Burke and Ernzerhof (PP‐PBE) calculations and experimental values (whenever available) for corresponding bulk systems (e.g., hexagonal close packing, zinc‐blende, and wurtzite(wz)), various kinds of nanostructures (such as nanowires, surfaces, and nanoclusters), and also some small molecular systems. Our results show that the derived parameters reproduce the structural and energetic properties of the above‐mentioned systems very well. With the derived parameter set, one can study zinc‐chalcogenide nanostructures of relatively large size which was otherwise prohibited by other methods. The Zn‐Cd parametrization developed in this article will help in studying large semiconductor hetero‐nanostructures of Zn and Cd chalcogenides such as ZnX/CdX core/shell nanoparticles, nanotubes, nanowires, and nanoalloys. © 2012 Wiley Periodicals, Inc.     

Photopolymerization of methyl methacrylate using a morpholine–sulfur dioxide charge-transfer complex as the photoinitiator

Photopolymerization of the vinyl monomer (M) of methyl methacrylate (MMA) was kinetically studied by using near-UV/visible light at 40°C and employing a morpholine (MOR)–sulfur dioxide (SO₂) charge-transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_P) was found to be dependent on the morpholine: sulfur dioxide mole ratio; the 1 : 2 (MOR–SO₂) complex acted as the latent initiator complex C which underwent further complexation with the monomer molecules to give the actual initiating complex I. Using the 1 : 2 (MOR–SO₂) C-T complex as the latent initiator, the observed kinetics may be expressed as R_P [MOR–SO₂]^0.27[M]^1.10. Benzoquinone behaved as a strong inhibitor. Polymers obtained tested positive for the incorporation of a sulphonate-type end group. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by a low initiator exponent and monomer exponent of greater than unity was explained on the basis of a prominent primary radical termination effect. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1973–1979, 1998