大孔膦酸树脂吸附镧的研究

本文测定了大孔膦酸树脂对La3 的吸附容量，介质pH、温度、吸附时间等因素对吸附的影响。测得吸附速率常数K298＝7．64×10－5S－1，树脂功能基与La3 的络合比为3：1，用化学及红外光谱等方法，得到大孔磷酸树脂吸附La3 的基本参数及其机理。     

Investigation of a liquid-liquid extraction system based on non-ionic surfactant-salt-H2O and mechanism of drug extraction

Based on the investigation of a non-ionic surfactant-salt-H₂O liquid-liquid extraction system, general rules concerning salt selection are concluded and the mechanism of phase separation is explained. The extraction behavior of chlorpromazine hydrochloride (CPZ) and procaine hydrochloride (PCN) in such a system is studied. Research shows that the extraction efficiency of CPZ can amount to 96% by twice extraction, which means that quantitative extraction is realized, while that of PCN is 77%. This system produces distribution coefficients (K_D) of 12.3 and 2.6, respectively, for CPZ and PCN. Extraction mechanism is deduced according to ultraviolet absorbance; and molecular fluorescence spectra change of the drugs in the system studied.     

用铜（Ⅱ）—L—精氨酸配体交换薄层色谱拆分氨基酸对映体

报道了一种新的配体交换薄层色谱拆分氨基酸对映体的方法。以醋酸铜－Ｌ－精氨酸的络合物为配体交换剂，用浸渍的方法吸附在硅胶薄层板上，制成配体交换薄层，用ＰＲＩＳＭＡ优化法选择出展开剂的最佳组成为：甲醇／乙腈／四氢呋喃／水＝８０：８．２：５．８：６，在此色谱条件下，十对氨基酸对映体得到良好的分离，Ｄ－和Ｌ－氨基酸的相对比移值在１．０９－２．４０之间。文中对配体交换薄层的制备方法，样品的分子结构及色谱行为     

无机螺旋体超分子配合物的组装、应用和结构转化研究进展

简述了近年来报道的具有新颖结构和性能的无机螺旋体超分子配合物的组装、应用和结构转化方面的最新进展,并展望了无机螺旋体的发展前景及其开发应用潜力。     

(4S)-4-羧基杂氮硅三环的合成

利用L-N,N-双(β-羟乙基)丝氨酸及L-N,N-双(β-羟乙基)苏氨酸与三乙氧基硅烷或氯烷基三乙氧基硅烷反应合成了具有手性的(4S)-4-羧基杂氮硅三环(1～5),并运用IR、~1HNMR、EI-MS等手段表征了结构。证据显示存在着贯穿笼状结构的N→Si配键。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

Briaexcavatolides X-Z, three new briarane-related derivatives from the gorgonian coral Briareum excavatum

Three new polyoxygenated briarane-type diterpenoids, briaexcavatolides X-Z (1-3), have been isolated from the gorgonian coral Briareum excavatum. The structures, including the relative configurations of briaranes 1-3, were elucidated by spectroscopic methods, particularly in 1D and 2D NMR experiments. The configuration of briarane 1 was further supported by molecular mechanics calculations.     

Indirect Flow Injection Chemiluminescence Method for the Determination of Tetracycfines Using Cu（]I） as a Probe Ion

This paper reported an indirect flow injection chemiluminescence （FI-CL） method for the determination of the drugs tetracycline （TC）, chlortetracycline （CTC） and oxytetracycline（OTC） using Cu（ Ⅱ ） as a probe ion. The CL reaction was induced on-line and after injection of the sample the negative peaks appeared as a result of complexation. The method was applied to the determination of TCs in pharmaceuticals and human urine with recoveries in the range95-105%.     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.