On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Development and validation of a capillary electrophoresis method for determination of enantiomeric purity and related substances of esomeprazole in raw material and pellets

A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S‐enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris‐phosphate buffer pH 2.5 with 20 mM 2‐hydroxypropyl‐β‐CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R‐OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R‐OMZ <0.2% limit established by the United States Pharmacopeia (USP) was found in the raw material and six‐pellet samples of ESO. No other impurities were found in the samples under these conditions. Therefore, the developed method was found to be appropriate not only for enantiomeric quality control of ESO but also for the analysis of ESO and the main related substance in raw material and pharmaceutical formulations as well as for stability indicating studies.     

A thermodynamic study of the aggregation process of oxacillin sodium salt in aqueous solution

The aggregation characteristics of oxacillin in aqueous solutions have been examined by means of conductivity measurements over the temperature range 288.15-313.15 K and by static light scattering measurements at 298.15 K. Two critical concentrations were detected in conductivity and light scattering over the concentration range 0-0.35 mol kg^-1. Light scattering measurements indicate the formation of dimers at the first critical concentration (0.024 mol kg^-1) and the subsequent formation of aggregates with an aggregation number of 8 at the second critical concentration (0.104 molkg^-1). The thermodynamic parameters of aggregation were derived from the critical concentration data using a mass-action model that has been modified for application to systems of low aggregation number. Values for the enthalpy of aggregate formation calculated by this method showed that the aggregation became increasingly exothermic with increasing temperature. The values of the two critical concentrations show that this penicillin, oxacillin, is more hydrophobic than other molecules of similar structure.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

In Situ Formation of One‐Dimensional Assemblies of Gold Nanoparticles in Confined Media

The spontaneous in situ formation of one‐dimensional (1D) assemblies of gold nanoparticles (NP) in oleylamine/bis(2‐ethylhexyl) sulfosuccinate sodium salt/water/octane (OAm/AOT/w/o) microemulsions by exploiting both the aurophilic bonding between OAm and gold salt, and the interactions between OAm and AOT surfactant is presented. Control on the structure of the resulting assemblies is achieved by changing in the solvent quality, the [Au]/[AOT] molar ratio and the presence of different cosolutes. A possible mechanism of the formation of the 1D parallel Au NP arrays is proposed.     

Mach-Zehnder interferometer employing coupled-resonator optical waveguides

A simple theoretical model of a Mach-Zehnder interferometer (MZI) consisting of two coupled-resonator optical waveguides with different lengths is proposed and experimentally demonstrated at microwave frequencies. Good agreement between theoretical and experimental results is observed. MZIs in planar photonic crystals may become key building blocks in the development of microscale optical integrated devices such as filters, demultiplexers, switches, and modulators.     

Basic Physicochemical Properties of Polyethylene Glycol Coated Gold Nanoparticles that Determine Their Interaction with Cells

A homologous nanoparticle library was synthesized in which gold nanoparticles were coated with polyethylene glycol, whereby the diameter of the gold cores, as well as the thickness of the shell of polyethylene glycol, was varied. Basic physicochemical parameters of this two‐dimensional nanoparticle library, such as size, ζ‐potential, hydrophilicity, elasticity, and catalytic activity ,were determined. Cell uptake of selected nanoparticles with equal size yet varying thickness of the polymer shell and their effect on basic structural and functional cell parameters was determined. Data indicates that thinner, more hydrophilic coatings, combined with the partial functionalization with quaternary ammonium cations, result in a more efficient uptake, which relates to significant effects on structural and functional cell parameters.     

A two‐step reaction scheme leading to singlet carbene species that can be detected under matrix conditions for the reaction of Zr(3F) with either CH3F or CH3CN

The results obtained from CASSCF‐MRMP2 calculations are used to rationalize the singlet complexes detected under matrix‐isolation conditions for the reactions of laser‐ablated Zr(³F) atoms with the CH₃F and CH₃CN molecules, without invoking intersystem crossings between electronic states with different multiplicities. The reaction Zr(³F) + CH₃F evolves to the radical products ZrF· + ·CH₃. This radical asymptote is degenerate to that emerging from the singlet channel of the reactants Zr(¹D) + CH₃F because they both exhibit the same electronic configuration in the metal fragment. Hence, the caged radicals obtained under cryogenic‐matrix conditions can recombine through triplet and singlet paths. The recombination of the radical species along the low‐multiplicity channel produces the inserted structures H₃C? Zr? F and H₂C?ZrHF experimentally detected. For the Zr(³F) + CH₃CN reaction, a similar two‐step reaction scheme involving the radical fragments ZrNC· + ·CH₃ explains the presence of the singlet complexes H₃C? Zr? NC and H₂C?Zr(H)NC revealed in the IR‐matrix spectra upon UV irradiation. © 2014 Wiley Periodicals, Inc.     

Covalent Grafting of Coordination Polymers on Surfaces: The Case of Hybrid Valence Tautomeric Interphases

We have developed a novel approach for grafting coordination polymers, structured as nanoparticles bearing surface reactive carboxylic groups, to amino‐functionalized surfaces through a simple carbodiimide‐mediated coupling reaction. As a proof‐of‐concept to validate our approach, and on the quest for novel hybrid interphases with potential technological applications, we have used valence tautomeric nanoparticles exhibiting spin transition at or around room temperature. SEM and AFM characterization reveal that the nanoparticles were organized chiefly into a single monolayer while X‐ray photoelectron spectroscopy (XPS) measurements confirm that the nanoparticles retain a temperature‐induced electronic redistribution upon surface anchorage. Our results represent an effective approach towards the challenging manufacture of coordination polymers.