Cucurbit[7]uril⋅Guest Pair with an Attomolar Dissociation Constant

Host?guest complexes between cucurbit[7] (CB[7]) or CB[8] and diamantane diammonium ion guests 3 or 6 were studied by ¹H NMR spectroscopy and X‐ray crystallography. ¹H NMR competition experiments revealed that CB[7]? 6 is among the tightest monovalent non‐covalent complexes ever reported in water with K_a=7.2×10¹⁷ M ^?1 in pure D₂O and 1.9×10¹⁵ M ^?1 in D₂O buffered with NaO₂CCD₃ (50 mM ). The crystal structure of CB[7]? 6 allowed us to identify some of the structural features responsible for the ultratight binding, including the distance between the NMe₃⁺ groups of 6 (7.78 Å), which allows it to establish 14 optimal ion‐dipole interactions with CB[7], the complementarity of the convex van der Waals surface contours of 6 with the corresponding concave surfaces of CB[7], desolvation of the C?O portals within the CB[7]? 6 complex, and the co‐linearity of the C₇ axis of CB[7] with the N⁺???N⁺ line in 6 . This work further blurs the lines of distinction between natural and synthetic receptors.     

Construction of Shallow Surface States through Light Ni Doping for High‐Efficiency Photocatalytic Hydrogen Production of CdS Nanocrystals

Ni‐doped CdS nanowires were synthesized by a simple one‐step method. X‐ray diffraction, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy confirmed that light Ni doping can form shallow surface states due to the presence of substitutional Ni ions, and heavy Ni doping can form deep surface states due to the presence of interstitial Ni ions. Surface photovoltage spectroscopy and transient photovoltage measurements revealed that the shallow surface states can prolong the lifetime of the photogenerated charge carriers, whereas the deep surface states lead to recombination of the photogenerated charge carriers. The relationship between different surface states and the photocatalytic performance of CdS nanocrystals are discussed. The enhanced density of shallow surface states due to light Ni doping significantly promotes photocatalytic H₂ production.     

Rationally Investigating the Influence of T1 Location on Electroluminescence Performance of Aryl Amine Modified Phosphine Oxide Materials

The correspondence between triplet location effect and host‐localized triplet–triplet annihilation and triplet–polaron quenching effects was performed on the basis of a series of naphthyldiphenylamine (DPNA)‐modified phosphine oxide hosts. The number and ratio of DPNA and diphenylphosphine oxide was adjusted to afford symmetrical and unsymmetrical molecular structures and different electronic environments. As designed, the first triplet (T₁) states were successfully localized on the specific DPNA chromophores. Owing to the meso‐ and multi‐insulating linkages, identical optical properties and comparable electrical performance was observed, including the same first singlet (S₁) and T₁ energy levels to support the similar singlet and triplet energy transfer and the close frontier molecular orbital energy levels. This established the basis of rational investigation on T₁ location effect without interference from other optoelectronic factors.     

A Selective Release System Based on Dual‐Drug‐Loaded Mesoporous Silica for Nanoparticle‐Assisted Combination Therapy

A selective release system was demonstrated with a dual‐cargo loaded MSNs. When stimulated by different signals (UV or H⁺), this system could selectively release different kinds of cargoes individually. Furthermore, this system has been used to provide a combination of chemotherapy and biotherapy for cancer treatment. This controlled release system could be an important step in the development of more effective and sophisticated nanomedicine and nanodevices, due to the possibility of selective release of a complex multi‐drug.     

强酸性阳离子交换树脂催化酯化丙烯酸和甲醇合成丙烯酸甲酯的反应动力学

以丙烯酸和甲醇为原料,强酸性阳离子交换树脂Amberlyst-15为催化剂,对苯二酚为阻聚剂,合成丙烯酸甲酯。 考察了醇酸摩尔比、催化剂用量和温度对反应过程的影响,在实验范围内,随着温度或者催化剂用量的增加,反应速率加快,丙烯酸的转化率也不断提高。 醇酸摩尔比的增加能提高丙烯酸的转化率,反应速率出现先增加后减缓的现象。 与此同时,建立该催化酯化反应的Pseudo-Homogeneous（PH）的理想和非理想以及Langmuir-Hinshelwood（LH）反应动力学模型,辨识得到相应反应动力学方程。 经比较,采用活度替代物质的量浓度的LH模型的平均相对偏差(MRD)最小,计算值为1.466%,最适合实际反应。     

ω-芋螺毒素的定量构效关系与虚拟筛选

ω-芋螺毒素属于海洋生物活性多肽,由24-31个氨基酸残基组成.特异性作用于电压敏感的钙离子通道(VGCCs),能够直接开发成药物或作为先导化合物进行新药开发.本文应用新型氨基酸残基结构描述符cscales和遗传偏最小二乘算法,对ω-芋螺毒素进行定量构效关系(QSAR)研究,并设计、构建了容量为2244个化合物的N-型和P/Q-型VGCC拮抗剂虚拟组合多肽库,然后分别采用QSAR模型预测和相似性搜索方法对组合多肽库进行了虚拟筛选.研究结果表明,建立的N-型和P/Q-型VGCC拮抗剂QSAR模型均具有较好的预测能力,交叉验证相关系数(CV-r2)均大于0.89.主成分分析和聚类分析结果表明,虚拟组合多肽库中化合物具有较好的结构多样性和差异性.通过虚拟筛选,得到了具有高预测活性的6个N-型和19个P/Q-型钙离子通道拮抗剂,为进一步的合成和活性评价奠定了理论基础.同时,本文建立的多肽QSAR预测模型和虚拟筛选策略,为其它多肽类化合物的定量构效关系研究和虚拟筛选提供了参考.     

K_2CO_3/Ni(OAc)_2催化下的以苯甲酰胺和N,N-二溴苯甲酰胺为氮溴源的胺溴化反应(英文)

本文报道了一个高效的以苯甲酰胺和N,N-二溴苯甲酰胺为氮溴源的胺溴化反应。这个反应有广泛的底物适应性、很好的产率及较高的非对映选择性。本文报道的胺溴化反应用金属无机盐和碱作为共同催化剂,与作者们以前报道的胺卤化反应不同。     

惰性盐辅助合成介孔石墨化碳片及其电容性能

以惰性盐KCl为模板、硝酸镍为金属催化剂镍源、葡萄糖为碳源,通过碳化处理制备了介孔石墨化碳片。利用扫描电子显微镜、透射电子显微镜、X-射线衍射仪和比表面测试仪对介孔石墨化碳片进行了表征。探讨了碳片形成的机理,采用三电极测试体系研究了介孔石墨化碳片电极材料的电化学性能。结果表明,10 g KCl制备的碳片比表面积最大(989 m2·g-1),在6 mol·L-1KOH电解液中,当电流密度为0.5 A·g-1时,比电容达到180 F·g-1;当电流密度达到10 A·g-1时,比电容维持在148 F·g-1,显示了电极具有较好的倍率性能;在10 A·g-1条件下,2 000次循环充放电测试后电容没有发生衰减,展示了在超级电容器方面的应用潜力。     

谷胱甘肽在高岭土修饰碳糊电极上的电化学研究

制备了高岭土修饰碳糊电极(KCPE),并以氢醌(HQ)为电催化介质测定还原型谷胱甘肽(GSH)。实验结果表明,在该电极上谷胱甘肽(GSH)的加入对氢醌的电化学响应有明显提高,且电催化氧化峰电流与GSH浓度呈良好的线性关系,由此可采用差分脉冲伏安法(DPV)对GSH进行定量测定。对修饰电极的电化学性能进行了表征,测得电极有效表面积为0.118 6 cm2、电荷传递系数为0.68、表观速率常数为1.08×104cm3·mol-1·s-1。在优化条件下,测得GSH在KCPE上的线性范围为0.1~1,2.5~25μmol/L,检出限为0.073μmol/L。用该方法对含GSH的市售药进行测定,结果满意。     

茶叶中乙酰甲胺磷及甲胺磷对映体的气相色谱法分离与测定

建立了乙酰甲胺磷、甲胺磷对映体在茶叶基质中的手性拆分与定量方法。比较了2种手性柱对乙酰甲胺磷及甲胺磷对映体的分离效果,并对分离效果较优的BGB-176手性柱进行色谱条件优化。茶叶样品经改良QuEChERS法处理后,气相色谱测定,外标法定量。在0.04,0.08,0.4 mg/kg 3个加标水平下,甲胺磷、乙酰甲胺磷的回收率分别为58.3%~66.4%和50.8%~57.6%,相对标准偏差(n=5)均小于7%。方法检出限为0.003~0.01 mg/kg。该方法简便、可靠,满足分析要求。通过实际样品的检测,发现乙酰甲胺磷、甲胺磷对映体在茶树上存在一定的降解差异。