Enantioselective separation on a naturally chiral surface

Kinked-stepped, high Miller index surfaces of metal crystals are chiral and, therefore, exhibit enantiospecific properties. Previous temperature-programmed desorption (TPD) spectra have shown that the desorption energies of R-3-methylcyclohexanone (R-3-MCHO) on the chiral Cu(643)(R) and Cu(643)(S) surfaces are enantiospecific (J. Am. Chem. Soc. 2002, 124, 2384). Here, a comparison of the TPD spectra from Cu(111), Cu(221), Cu(533), Cu(653)(R&S), and Cu(643)(R&S) surfaces reveals that the enantiospecific desorption occurs from the chiral kink sites on the Cu(643) surfaces. Titration of the chiral kink sites with I atoms confirms this assignment of desorption features in the TPD spectra. Finally, the enantiospecific difference in the desorption energies of R- and S-3-MCHO has been used as the basis for demonstration of an enantioselective, kinetic separation of racemic 3-MCHO into its purified components during adsorption and desorption on the Cu(643)(R&S) surfaces.     

Sequential extraction of phosphorus in soil and sediment using a continuous-flow system

Distribution and mobility of phosphorus in soil and sediment are usually studied by sequential extraction. In the extraction procedure, a sample is treated with a series of reagents to distinguish the phases to which phosphorus is associated such as carbonate and iron or manganese oxides, etc. There have been a number of extraction schemes presented for phosphorus. At present, all of the existing schemes are carried out batchwise. Phosphorus contents derived from all sequences are operationally defined and depend on experimental conditions.An extraction procedure, which is a continuous-flow-based technique, was recently proposed by our group for metals in soils and sediments. The extraction is carried out in a closed chamber through which extractants are passed sequentially. In this paper, the system was investigated using the extraction scheme of Hieltjes and Lijklema to study distribution of phosphorus in three certified reference materials (CRMs). A number of fractions were collected for each reagent for subsequent colorimetric determination. The results are compared with those obtained from a batch extraction. The summation of phosphorus contents of all phases were compared with the certified values and with the values obtained from total digestion. These results have demonstrated that the continuous extraction system developed is also applicable for fractionation of phosphorus. Advantage and disadvantage are discussed.     

An experimental study of chromatographic dynamics in open and packed non-cylindrical conduits

A systematic investigation of the influence of the perimeter shape of open and particle packed fused silica capillaries on chromatographic properties such as resistance to flow and dispersion of solutes propelled through these channels has been conducted. Verifications of these uncommon experiments with existing theoretical treatments are presented and the insights transferred to a novel polymer chip design with integrated facilities for complex separations. A comparison of the chromatographic performance of a real life proteomics sample on this chip with a capillary column of "similar" dimensions is presented.     

Dipole-bound anions of highly polar molecules: ethylene carbonate and vinylene carbonate

Results of experimental and theoretical studies of dipole-bound negative ions of the highly polar molecules ethylene carbonate (EC, C3H4O3, mu=5.35 D) and vinylene carbonate (VC, C3H2O3, mu=4.55 D) are presented. These negative ions are prepared in Rydberg electron transfer (RET) reactions in which rubidium (Rb) atoms, excited to ns or nd Rydberg states, collide with EC or VC molecules to produce EC- or VC- ions. In both cases ions are produced only when the Rb atoms are excited to states described by a relatively narrow range of effective principal quantum numbers, n*; the greatest yields of EC- and VC- are obtained for n*(max)=9.0+/-0.5 and 11.6+/-0.5, respectively. Charge transfer from low-lying Rydberg states of Rb is characteristic of a large excess electron binding energy (Eb) of the neutral parent; employing the previously derived empirical relationship Eb=23/n*(max)(2.8) eV, the electron binding energies are estimated to be 49+/-8 meV for EC and 24+/-3 meV for VC. Electron photodetachment studies of EC- show that the excess electron is bound by 49+/-5 meV, in excellent agreement with the RET results, lending credibility to the empirical relationship between Eb and n*(max). Vertical electron affinities for EC and VC are computed employing aug-cc-pVDZ atom-centered basis sets supplemented with a (5s5p) set of diffuse Gaussian primitives to support the dipole-bound electron; at the CCSD(T) level of theory the computed electron affinities are 40.9 and 20.1 meV for EC and VC, respectively.     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.     

Development of combinatorial chemistry methods for coatings: high-throughput adhesion evaluation and scale-up of combinatorial leads

Coupling of combinatorial chemistry methods with high-throughput (HT) performance testing and measurements of resulting properties has provided a powerful set of tools for the 10-fold accelerated discovery of new high-performance coating materials for automotive applications. Our approach replaces labor-intensive steps with automated systems for evaluation of adhesion of 8 x 6 arrays of coating elements that are discretely deposited on a single 9 x 12 cm plastic substrate. Performance of coatings is evaluated with respect to their resistance to adhesion loss, because this parameter is one of the primary considerations in end-use automotive applications. Our HT adhesion evaluation provides previously unavailable capabilities of high speed and reproducibility of testing by using a robotic automation, an expanded range of types of tested coatings by using the coating tagging strategy, and an improved quantitation by using high signal-to-noise automatic imaging. Upon testing, the coatings undergo changes that are impossible to quantitatively predict using existing knowledge. Using our HT methodology, we have developed several coatings leads. These HT screening results for the best coating compositions have been validated on the traditional scales of coating formulation and adhesion loss testing. These validation results have confirmed the superb performance of combinatorially developed coatings over conventional coatings on the traditional scale.     

A convenient preparation of 3,3,3-trifluoro-1-propynylamines and their Lewis acid catalyzed reaction with carbonyl compounds leading to (z)-alpha-(trifluoromethyl)-alpha,beta-unsaturated amides

N,N-Dialkyl(3,3,3-trifluoro-1-propynyl)amines were readily prepared by a three-step procedure starting from commercially available 2,2,3,3,3-pentafluoropropanol. These fluorinated alkynylamines reacted smoothly with a variety of aldehydes or ketones in the presence of a catalytic amount of Lewis acid and molecular sieves 4A at ambient temperature to produce the corresponding alpha-(trifluoromethyl)-alpha,beta-unsaturated amides in good to excellent yields with high Z-stereoselectivity.     

Tetrathiafulvalene crowns: redox-switchable ligands

A series of redox-responsive ligands that associate the electroactive tetrathiafulvalene core with polyether subunits of various lengths has been synthesized. X-ray structures are provided for each of the free ligands. The requisite structural criteria for reaching switchable ligands are satisfied for the largest macrocycles, that is, planarity of the 1,1',3,3'-tetrathiafulvalene (TTF) pi system and correctly oriented coordinating atoms. The ability of these ligands to recognize various metal cations as a function of the cavity size has been investigated by various techniques (LSIMS, 1H NMR, and UV/Vis spectroscopy, cyclic voltammetry). These systems exhibit an unprecedented high coordination ability among TTF crown ethers. Their switchable ligating properties have been confirmed by cyclic voltammetry, and metal-cation complexation has been illustrated by X-ray structures of three of the corresponding metal complexes (Pb2+, Sr2+, and Ba2+). Solid-state structures of these complexes display original packing modes with channel-like arrangements.     

"Dimers" and "trimers" of tetrahydroindenes and hexahydroazulenes, respectively generated from [2-(1-cycloalkenyl)ethynyl]carbene complexes (M = W, Cr) by cascade cyclization/cycloaddition reactions

A cascade of cyclization/cycloaddition reactions was triggered by addition of protic oxygen nucleophiles ROH 2 (RO = CH3CO2, PhCO2, PhO) to [2-(1-cyclohexenyl)ethynyl]carbene complexes 1b and 1c (M=W, Cr, respectively), affording highly strained "dimers" 11/11' and "trimers" 12 of the carbene ligand. The first reaction step involved the formation of 1-metalla1,3,5-hexatrienes 7, which readily gave tetrahydroindenes 8 by pi cyclization and extrusion of the metal unit. "Dimers" 11/11' were generated from tetrahydroindenes 8 by a highly exo selective [4+2] cycloaddition of compounds 1b and 1c to afford 1-metalla-1,3,5-hexatriene intermediates 9, and a spontaneous pi cyclization of the latter compounds involving the disengagement of the metal unit. Propenylidene cyclohexenes 13/13' were formed in "ene"-type side reactions to the pi cyclization of 1-metalla-1,3,5-hexatrienes 7, by loss of the metal unit. "Dimers" 11 were transformed into "trimers" 12 by a [4+2] cycloaddition and subsequent pi-cyclization of the resulting 1-metalla-1,3,5-hexatriene system. The course of the reaction was elucidated by means of model reactions with (2-phenylethynyl)carbene complex 14, in which 1-metalla-1,3,5-hexatriene intermediates 16 and 17 were isolated and characterized. Alkynyl benzene derivatives 19 were obtained by an unprecedented ring-expansion of a cyclopentadiene unit of "dimers" 11a and 11c, involving the insertion of a carbene carbon atom of compound 14 into a C=C bond. A reaction cascade leading to "dimers" 24/24' could also be triggered by treatment of compounds 2 with [2-(1-cycloheptenyl)ethynyl]carbene tungsten complex 1d.     

Synthesis and structural characterization of tin(II) and zinc(II) derivatives of cyclic alpha-hydroxyketones, including the structures of Sn(maltol)(2), Sn(tropolone)(2), Zn(tropolone)(2), and Zn(hinokitiol)(2)

Zinc(II) and tin(II) derivatives of maltol (Hmalt), ethylmaltol (HEtmalt), tropolone (Htrop), hinokitiol (Hhino), and kojic acid (Hkoj) have been prepared and characterized, and the crystal structures of M(trop)(2) (M = Zn, Sn), Zn(hino)(2).EtOH, and Sn(malt)(2) have been determined. The Zn(trop)(2) is a polymeric structure in which tropolone has both a bridging and chelating role; zinc(hino)(2) crystallizes as an ethanol adduct of which the structure is a dimeric fragment of the Zn(trop)(2) polymer and in which each metal is "capped" by a molecule of alcohol. The tin complexes are notably air-stable despite adopting monomeric pseudo-trigonal-bipyramidal structures (SnO(4)E; E is a stereochemically active lone electron pair) in which the ligands only chelate a single metal center.