Fibre-optic fluorosensor for sulphur dioxide

A fibre-optic sensor for continuous measurement of sulphur dioxide is described. It is based on the dynamic quenching of the fluorescence of a polynuclear aromatic hydrocarbon [benzo(b)fluoranthene] which is immobilized in silicone polymer. Sulphur dioxide is shown to be an efficient quencher; Stern-Volmer graphs are given which describe the relation between SO₂ concentration and relative fluorescence. Detection limits are about 0.01% (v/v) SO₂ in air; the useful range is from 0.01–6% (v/v). Other gases likely to occur in air were found to be inert, except for oxygen which also acts as a dynamic quencher. Its interference is negligible for SO₂ levels below 6% in air at constant oxygen pressure, because the quenching efficiency of SO₂ is about 26 times higher than that of oxygen. For varying oxygen levels, a two-sensor technique is suggested.     

On the Synthesis of 2-Acetyl-4-aryl-6H-1,3,4-thiadiazin-5-ones by Reaction of Nitrilimines with α-Mercapto Alkanoic Acids

Summary.  N′-Arylacetonitrilimines were generated from acetohydrazonyl chlorides and reacted with mercaptoalkanoic acids forming 4-aryl-5-oxo-3-thiahexanoic acids. These were cyclized by reaction with dicyclohexyl carbodiimide yielding 2-acetyl-4-aryl-6H-1,3,4-thiadiazin-5-ones. Received November 13, 2001. Accepted January 9, 2002     

Composition and properties of freeze-dried products of nicotinic acid withβ-cyclodextrin and heptakis (2,6-0-dimethyl)-β-cyclodextrin

The purpose of the study was to examine the formation of inclusion compounds in the freeze-dried products obtained from aqueous solutions of nicotinic acid and -cyclodextrin (-CD), or heptakis (2,6-0-dimethyl)--cyclodextrin (DIMEB). The molar ratios used were 1:1 and 2:1. In addition two freezing temperatures (–40 and –196°C) and different secondary drying temperatures (+50 and +80°C) were used. Freeze-dried products with -CD obtained after low temperature freezing are of the same crystallographic structure as seen in a pure inclusion compound prepared by coprecipitation. Amorphous products were formed after fast freezing. The molar ratios of included nicotinic acid in the freeze-dried products vary — dependent on the preparation conditions — between 0.75:1 and 1:1. A factorial design proves that the included drug amount can be increased by enhancement of the amount of nicotinic acid used, by faster freezing, and by the combination of these two factors. The proof of inclusion formation was given by a combination of X-ray diffractography, differential scanning calorimetry, thermogravimetry and thermofractography.The freeze-dried preparations obtained with DIMEB were amorphous mixtures of the two components. No proof for inclusion of the nicotinic acid in the cyclodextrin cavity could be given. Higher (–40°C) or lower (–196°C) freezing temperatures and the running of the secondary drying process could not influence these results. The very low stability constant of the complex and steric reasons are responsible for this behavior.     

Zur krümmungsverwandtschaft von zwangläufen in affinen ck — Ebenen II

In part I we have studied a map of osculating elements of an affine Cayley-Klein (CK-) plane into the Lie algebra A₄(²) of the aequiform transformations A₄(²) of the given plane A₂(, ²). If we use the real projective space P₃() over A₄(²) each osculating element defines a straight line in P₃(). We now give a one parameter motion in A₄(²) and study second order properties and their analogon in the Lie algebra and P₃(), respectively. We show that the wellknown relationship between the points of the moving frame and the osculating circles of the point paths in the fixed frame may be interpreted as part of a quadratic map of certain straight Lines of P₃(). An analogous result holds for the curvature of pairs of envelopes; the mapV induced in P₃() than is contained in a cubic relationship of straight lines.

---

---

Herrn Professor Oswal Giering zum 60. Geburtstag gewidmet     

Computer controlled spreading resistance system for measurement of carrier concentration profiles of silicon structures

A new computer controlled equipment for carrier concentration profile determination of silicon structures by a spreading resistance technique is presented. The required data and plots can easily be obtained by means of a new software package, which has been specially developed for this purpose. Measurements have been performed on different structures in order to verify the suitability of both the measuring system and the software package. The reproducibility has been found to be within 5% for the investigated structures.     

Silver clusters from nozzle expansions

This note reports on the first successfull experiments to generate silver clusters (N≦100) in supersonic nozzle flows. A mixture of argon/silver-vapor was used expanding from a conical nozzle (0.35 mm, 10° full cone angle, 17 mm long conical section). Source temperature and total pressure ranged up to 2200 K/300 kPa, and silver partial pressure up to 25 kPa. The data confirm the scaling laws developed to compare clustering of metals with that of rare gases.     

Struktur von 7,11-Diphenyl-2,4-diazaspiro[5,5]undecan-1,3,5,9-tetraonen durch LIS-NMR

A semi-quantitative method for determining distances between a possible coordination centre and protons from LIS-NMR values is developed for the title compounds3, although these have four coordination points. This makes it possible to propose structures and conformations for the isomers of3.

---

---

Mit 4 Abbildungen

---

H.-H. Otto undH. Yamamura, Ann. Chem., im Druck.     

Fiber optic multi-channel protein detector for use in preparative continuous annular chromatography

On-line coupling continuous-flow liquid membrane extraction (CFLME) with HPLC, a novel automatic system was developed for the determination of sulfonylurea herbicides in water. After an automatic trace-enrichment process by CFLME, which is the combination of continuous flow liquid-liquid extraction and support liquid membrane (SLM) extraction, the target analytes were concentrated in 50 microl of 0.2 M Na2CO3-NaHCO3 (pH 10.0) buffer. The concentrated sample solutions were injected directly onto a C18 analytical column with a valve, and detected at 240 nm with a diode array detector. Metsulfuron methyl (MSM), and DPX-A 7881 were baseline separated with a mobile phase consisting of methanol and 67 mM KH2PO4-Na2HPO4 (pH 5.91) buffer (45+55, v+v) at a flow-rate of 1.0 ml min(-1). With an enrichment time of 10 min and enrichment sample volume of 20 ml, the enrichment factors and detection limits are 100 and 0.05 microg l(-1) for MSM, and 96 and 0.1 microg l(-1) for DPX-A 7881, respectively. The linear range and precision (RSD) are 0.1-50 microg l(-1) and 7.0% for MSM, and 0.2-50 microg l(-1) and 9.2% for DPX-A 7881, respectively. This proposed method was applied to determine MSM and DPX-A 7881 in seawater, tap water, and bottled mineral water with spiked recoveries in the range of 83-95% for MSM and 88-100% for DPX-A 7881, respectively.     

Characterization of humic substances: Implications for trihalomethane formation

Humic substances are precursors of carcinogenic trihalomethanes (THMs) formed during disinfection by chlorination in water treatment processes. In an effort to understand the relationship between trihalomethane formation potential (THMFP) and physicochemical properties of humic substances, UV-visible absorbance, fluorescence in emission and synchronous scan modes, and NMR spectra were measured for several aquatic fulvic and humic acids. For comparison, a soil fulvic acid was also examined using these methods. The feasibility of the gradient modified spin-echo (GOSE) NMR experiment to selectively measure singlet resonances arising from isolated protons was examined. In addition, diffusion coefficients were measured for DMSO solutions of the fulvic acids using BPPLED and GOSE-edited pulse sequences. Although none of the methods tested produced results that correlated with THMFP, the GOSE intensities determined for different regions of the NMR spectra did reflect the relative abundance of different types of functional groups produced by lignin oxidation. In addition, the GOSE-edited diffusion results suggest that the isolated protons, those most reactive to chlorination, are more likely contained in the larger molecular weight fractions of fulvic acids.