Solid-phase synthesis of lipidated peptides

A new flexible and efficient methodology for the solid-phase synthesis of lipidated peptides has been developed. The approach is based on the use of previously synthesized building blocks and overcomes the limitations of previously reported methods, since long doubly lipidated peptides can be synthesized by using this route. Furthermore, it was thus possible to prepare a large number of N- and H-Ras peptides bearing a wide range of reporter and/or linking groups--efficient tools for the investigation of biological processes. In terms of efficiency and flexibility this solid-phase method is superior to the solution-phase synthesis. It gives pure peptides in multimilligram amounts within a much shorter time and with superior overall yield.     

Absolute configuration of C2-symmetric spiroselenurane: 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole

The enantiomers of 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole have been separated on a chiral preparative chromatographic column. The experimental vibrational circular dichroism (VCD) spectra have been obtained for both enantiomers in CH(2)Cl(2). The theoretical VCD spectra have been obtained by means of density functional theoretical calculations with the B3 LYP density functional. From a comparison of experimental and theoretical VCD spectra, the absolute configuration of an enantiomer with positive specific rotation in CH(2)Cl(2) at 589 nm is determined to be R. This conclusion has been verified by comparing results of experimental optical rotatory dispersion (ORD) and electronic circular dichroism (ECD) to predictions of the same properties using the B3 LYP functional for the title compound.     

Photo-triggered hydrogen atom transfer from an iridium hydride complex to unactivated olefins

Many photoactive metal complexes can act as electron donors or acceptors upon photoexcitation, but hydrogen atom transfer (HAT) reactivity is rare. We discovered that a typical representative of a widely used class of iridium hydride complexes acts as an H-atom donor to unactivated olefins upon irradiation at 470 nm in the presence of tertiary alkyl amines as sacrificial electron and proton sources. The catalytic hydrogenation of simple olefins served as a test ground to establish this new photo-reactivity of iridium hydrides. Substrates that are very difficult to activate by photoinduced electron transfer were readily hydrogenated, and structure–reactivity relationships established with 12 different olefins are in line with typical HAT reactivity, reflecting the relative stabilities of radical intermediates formed by HAT. Radical clock, H/D isotope labeling, and transient absorption experiments provide further mechanistic insight and corroborate the interpretation of the overall reactivity in terms of photo-triggered hydrogen atom transfer (photo-HAT). The catalytically active species is identified as an Ir(ii) hydride with an Ir^II–H bond dissociation free energy around 44 kcal mol⁻¹, which is formed after reductive ³MLCT excited-state quenching of the corresponding Ir(iii) hydride, i.e. the actual HAT step occurs on the ground-state potential energy surface. The photo-HAT reactivity presented here represents a conceptually novel approach to photocatalysis with metal complexes, which is fundamentally different from the many prior studies relying on photoinduced electron transfer.

Upon irradiation with visible light, an iridium hydride complex undergoes hydrogen atom transfer (HAT) to unactivated olefins in presence of a sacrificial electron donor and a proton source.     

Assignment of E/Z isomers in Schiff bases of 3-acyltetramic acids with ethylenediamine by 1H and 13C NMR spectroscopy

The reaction of ethylenediamine with an equivalent mixture of diversely substituted 3-acyltetramic acids leads to Z/Z, Z/E, E/Z and E/E isomers. The E/Z isomerisation is slow in the NMR time scale of the ¹H and ¹³C chemical shifts; therefore at room temperature and in deuterochloroform all isomers of the new synthesized asymmetric compounds N,N′-ethylene-(1-ethyl-5,5-dimethyl-1′,5′,5′-trimethyl-3,3′-acetyltetramic acid) a, N,N′-ethylene-(5,5-dimethyl-1′,5′,5′-trimethyl-3,3′-acetyltetramic acid) b and, N,N′-ethylene-(1,5,5-trimethyl-1′,5′,5′-trimethyl-3-acetyl-3′-formyl-tetramic acid) c could be found in the corresponding spectra. To assign the ¹³C NMR signals we used two-dimensional ¹³C-¹H one-bond (HMQC) and ¹³C-¹H multibond (HMBC) correlated spectroscopy and the empirical rule that CO signals involved in hydrogen bonds are shifted to a lower field. The relative stability of isomers depending on substitution pattern could be estimated from the composition of the equilibria. b crystallizes as Z/Z isomer from ethanolic solution. The X-ray structural analysis of b has shown two CH-O hydrogen bonds. Received: 31 May 1996 / Revised: 26 June 1996 / Accepted: 1 July 1996     

Use of U-shaped donor-bridge-acceptor molecules to study electron tunneling through nonbonded contacts

A systematic determination of electronic coupling matrix elements in U-shaped molecules is demonstrated. The unique architecture of these systems allows for the determination of the electronic coupling through a pendant molecular moiety that resides between the donor and acceptor groups; this moiety quantifies the efficiency of electron tunneling through nonbonded contacts. Experimental electron-transfer rate constants and reaction free energies are used to calibrate a molecular-based model that describes the solvation energy. This approach makes it possible to experimentally determine electronic couplings and compare them with computational values.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Synthesis and Crystal Structures of Two Novel Anionic Aluminophosphates: A One-Dimensional Chain, UT-7 ([Al(3)P(5)O(20)H](5-)[C(7)H(13)NH(3)(+)](5)), and a Layer Containing Two Cyclic Amines, UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)])

UT-7 and UT-8 (University of Toronto, structure numbers 7 and 8) are two novel aluminophosphate materials prepared under non-aqueous conditions. Their structures, extended in one and two dimensions, respectively, have been solved by single-crystal X-ray diffraction and characterized by a variety of methods including powder X-ray diffraction (PXRD), insitu high-temperature PXRD, thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), and scanning electron microscopy (SEM). UT-7 ([Al(3)P(5)O(20)H](5)(-)[C(7)H(13)NH(3)(+)](5), triclinic space group P&onemacr;, Z = 2, a = 10.118(3) ?, b = 15.691(4) ?, c = 18.117(3) ?, alpha = 72.91(2) degrees, beta = 85.18(2) degrees, gamma = 79.49(2) degrees ) is built of polymeric one-dimensional chain units, hydrogen-bonded into anionic layers that are charge-compensated by interlamellar cycloheptylammonium cations. UT-7 is isostructural to our previously discovered UT-3 chain structure, isolated in the analogous cyclopentylamine system. UT-8 ([Al(3)P(4)O(16)](3-)[C(4)H(7)NH(3)(+)](2)[C(5)H(10)NH(2)(+)], monoclinic space group P2(1), Z = 2, a = 8.993(4) ?, b = 14.884(8) ?, c = 9.799(9) ?, beta = 103.52(3) degrees ) is a two-dimensional net isostructural to several previously reported [Al(3)P(4)O(16)](3)(-) layers. The interlayer region of UT-8 is occupied by two different cyclic organic amine species, namely piperidinium and cyclobutylammonium. To our knowledge, this is the first report of the crystal structure of an aluminophosphate material containing cyclobutylammonium or a mixture of cyclic amines. Interestingly, UT-7 is observed to thermally transform in the solid state to an as yet unknown layered material that can be independently synthesized in a similar synthetic system. In the same way as UT-3 transforms to the UT-4 layered phase, we believe UT-7 transforms to a layered material by means of a chain to layer transformation.     

Synthesis and chiroptical analysis of optically active chiral shell dendrons

We have prepared a series of chiral dendrons (1-4) in which chiral subunits are placed in individual generational shells at varying distances from the focal point. The optical activity of these chiral dendritic structures is successfully modeled using structurally similar low-molecular weight model compounds. In dendrons 1a and 1b a chiral subunit is directly adjacent to the focal point, whereas in dendrons 2, 3, and 4a,b the chiral subunits are incorporated in the interior of the dendron. A marked difference in optical activity between the former 1a and 1b) and latter (2, 3, 4a,b) dendrons is mirrored in the optical activities of model compounds 12a, 12b, 19a, and 19b. These model compounds directly mimic the surrounding constitution of the chiral subunits in the dendrons. This successful analysis of the chiroptical data using low-molecular weight model compounds suggests that these dendrons do not possess conformational order in solution.     

Microwave-assisted ring-closing metathesis revisited. On the question of the nonthermal microwave effect

The ring-closing metathesis reactions (RCM) of six standard diene substrates leading to five-, six-, or seven-membered carbo- or heterocycles were investigated under controlled microwave irradiation. RCM protocols were performed with standard Grubbs type II and a cationic ruthenium allenylidene catalyst in neat and ionic liquid-doped methylene chloride under sealed vessel conditions. Very rapid conversions (15 s) were achieved utilizing 0.5 mol % Grubbs II catalyst under microwave conditions. Careful comparison studies indicate that the observed rate enhancements are not the result of a nonthermal microwave effect.     

Hyphenation of capillary high-performance liquid chromatography with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for nano-scale screening of single-bead combinatorial libraries

This paper focuses on the technical aspects of chemical screening from 384-well plate nano-scale single-bead combinatorial libraries. The analytical technique utilized is a combination of capillary liquid chromatography with ultraviolet detection and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The HPLC/MALDI-MS hyphenation is achieved by means of a micro-fraction collector with a peak detection system that automatically collects the peaks onto the MALDI targets for subsequent characterization. Several experimental parameters such as type of 384-well plate, well-plate sealing foils, and a column-switching procedure were investigated using a small test library of nine components. Additionally, the influence of different MALDI matrices, different MALDI targets and sample-spotting techniques on the MALDI detection sensitivity as well as the ruggedness and sample throughput capacity of this technique were studied. Optimum results for the analytes investigated were obtained with 2,5-dihydroxybenzoic acid using on-line mixing of HPLC effluent and matrix solution. To demonstrate the potential of this capillary HPLC/MALDI-TOFMS method, its application to several single-bead libraries was investigated. The instrumental method allowed for the rapid identification and purity assessment of combinatorial libraries with detection limits down to the higher femtomole level using both UV detection and MALDI mass spectrometry.