Hamaker 2: A Toolkit for the Calculation of Particle Interactions and Suspension Stability and its Application to Mullite Synthesis by Colloidal Methods

For modern processing of ceramics at the nanoscale, the influence of interparticle interactions in the suspended state becomes increasingly important. The Hamaker 2 program has been developed for the rapid prediction of these interactions, allowing us to gain important understanding of the often delicate balance of forces in ceramic powder suspensions. This article discusses the theoretical foundation of the implemented models and shows the benefit of this predictive approach applied to mullite production by colloidal methods.     

Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.     

Production of Antibodies and Development of Specific Polarization Fluoroimmunoassay for Acetochlor

Specific polyclonal antibodies towards acetochlor (2-chloro- N -(ethoxymethyl)- N -(2-ethyl-6-methylphenyl)acetamide) were obtained from rabbits immunized against a 3-mercaptopropionic acid derivative of acetochlor, covalently attached to bovine serum albumin. A polarization fluoroimmuoassay (PFIA) based on these antibodies was developed and optimized to detect acetochlor in water samples. The optimized PFIA had a detection limit of 9 µg/L, linear working range from 50 to 5500 µg/L and within-assay coefficient of variation less than 4%. Cross-reactivity studies demonstrated that these antibodies are capable of specific detection of acetochlor amongst structurally related chloroacetanilide herbicides. Assay cross-reactivity values were: alachlor 0%, metolachlor 2.4%, propachlor 0%, butachlor 0.2% and dimethachlor 0.5%. Five organic solvents commonly used in sample extraction were evaluated for their effect on acetochlor PFIA performance, and methanol and ethanol were found to be compatible with the assay up to 10% v/v.     

Complexation of calix[4]arenehydroxymethylphosphonic acids with amino acids. Binding constants determination of the complexes by HPLC method

Host–Guest complexation process of calixarenehydroxymethylphosphonic acids with 10 amino acids in solution H₂O/MeCN (99:1) had been studied. Binding constants of the inclusion complexes from the dependence between capacity factors of the Guest and the calixarene-Host concentration in the mobile phase had been calculated. It was shown the binding constants depend on the nature of the amino acid residue, conformation of the calixarene skeleton, quantity of phosphoryl groups at the upper rim. In accordance with molecular calculation the complexation is determined by the electrostatic interactions between the positively charged nitrogen atom of amino acid and the negatively charged oxygen atom of phosphonic group of calixarene molecule, hydrogen bonds, π–π, CH–π and solvatophobic, interactions.     

Regioselective Sequential Additions of Nucleophiles and Electrophiles to Perfluoroalkylfullerenes: Which Cage C Atoms Are the Most Reactive and Why?

The sequential addition of CN^? or CH₃^? and electrophiles to three perfluoroalkylfullerenes (PFAFs), C_s‐C₇₀(CF₃)₈, C₁‐C₇₀(CF₃)₁₀, and C_s‐p‐C₆₀(CF₃)₂, was carried out to determine the most reactive individual fullerene C atoms (as opposed to the most reactive C?C bonds, which has previously been studied). Each PFAF reacted with CH₃^? or CN^? to generate metastable PFAF(CN)^? or PFAF(CH₃)₂^2? species with high regioselectivity (i.e., one or two predominant isomers). They were treated with electrophiles E⁺ to generate PFAF(CN)(E) or PFAF(CH₃)₂(E)₂ derivatives, also with high regioselectivity (E⁺=CN⁺, CH₃⁺, or H⁺). All of the predominant products, characterized by mass spectrometry and ¹⁹F NMR spectroscopy, are new compounds. Some could be purified by HPLC to give single isomers. Two of them, C₇₀(CF₃)₈(CN)₂ and C₇₀(CF₃)₁₀(CH₃)₂(CN)₂, were characterized by single‐crystal X‐ray diffraction. DFT calculations were used to propose whether a particular reaction is under kinetic or thermodynamic control.     

Harnessing the Flexibility of Peptidic Scaffolds to Control their Copper(II)‐Coordination Properties: A Potentiometric and Spectroscopic Study

Designing small peptides that are capable of binding Cu²⁺ ions mainly through the side‐chain functionalities is a hard task because the amide nitrogen atoms strongly compete for Cu²⁺ ion coordination. However, the design of such peptides is important for obtaining biomimetic small systems of metalloenyzmes as well as for the development of artificial systems. With this in mind, a cyclic decapeptide, C‐Asp, which contained three His residues and one Asp residue, and its linear derivative, O‐Asp, were synthesized. The C‐Asp peptide has two Pro? Gly β‐turn‐inducer units and, as a result of cyclization, and as shown by CD spectroscopy, its backbone is constrained into a more defined conformation than O‐Asp, which is linear and contains a single Pro? Gly unit. A detailed potentiometric, mass spectrometric, and spectroscopic study (UV/Vis, CD, and EPR spectroscopy) showed that at a 1:1 Cu²⁺/peptide ratio, both peptides formed a major [CuHL]²⁺ species in the pH range 5.0–7.5 (C‐Asp) and 5.5–7.0 (O‐Asp). The corrected stability constants of the protonated species (log K*_CuH(O?Asp)=9.28 and log K*_CuH(C?Asp)=10.79) indicate that the cyclic peptide binds Cu²⁺ ions with higher affinity. In addition, the calculated value of K_eff shows that this higher affinity for Cu²⁺ ions prevails at all pH values, not only for a 1:1 ratio but even for a 2:1 ratio. The spectroscopic data of both [CuHL]²⁺ species are consistent with the exclusive coordination of Cu²⁺ ions by the side‐chain functionalities of the three His residues and the Asp residue in a square‐planar or square‐pyramidal geometry. Nonetheless, although these data show that, upon metal coordination, both peptides adopt a similar fold, the larger conformational constraints that are present in the cyclic scaffold results in different behaviour for both [CuHL]²⁺ species. CD and NMR analysis revealed the formation of a more rigid structure and a slower Cu²⁺‐exchange rate for [CuH(C‐Asp)]²⁺ compared to [CuH(O‐Asp]²⁺. This detailed comparative study shows that cyclization has a remarkable effect on the Cu²⁺‐coordination properties of the C‐Asp peptide, which binds Cu²⁺ ions with higher affinity at all pH values, stabilizes the [CuHL]²⁺ species in a wider pH range, and has a slower Cu²⁺‐exchange rate compared to O‐Asp.     

A Combined Kinetic and Thermodynamic Approach for the Interpretation of Continuous‐Flow Heterogeneous Catalytic Processes

The heterogeneous proline‐catalyzed aldol reaction was investigated under continuous‐flow conditions by means of a packed‐bed microreactor. Reaction‐progress kinetic analysis (RPKA) was used in combination with nonlinear chromatography for the interpretation, under synthetically relevant conditions, of important mechanistic aspects of the heterogeneous catalytic process at a molecular level. The information gathered by RPKA and nonlinear chromatography proved to be highly complementary and allowed for the assessment of optimal operating variables. In particular, the determination of the rate‐determining step was pivotal for optimizing the feed composition. On the other hand, the competitive product inhibition was responsible for the unexpected decrease in the reaction yield following an apparently obvious variation in the feed composition. The study was facilitated by a suitable 2D instrumental arrangement for simultaneous flow reaction and online flow‐injection analysis.     

Stochastic Equations and Inclusions with Mean Derivatives and Some Applications

The paper is devoted to a brief introduction into the theory of equations and inclusions with mean derivatives and to investigation of a special type of such inclusions called inclusions of geometric Brownian motion type. The existence of optimal solutions maximizing some cost criteria, is proved.     

A synthetic strategy toward branched oligomesogenic phosphonic acids: comparison of alternative pathways

This work is devoted to the elaboration of a practical scheme for the synthesis of dendritic derivatives of gallic acid containing a carboxylate-ω-alkylphosphonic acid group and three terminal promesogenic substituents. Two synthetic strategies toward the target compounds were examined that differ in the sequence of the introduction of the promesogenic units and ω-alkylphosphonic group.