One-pot synthesis of 2-(dicyanomethylene)-1,2-dihydropyridine derivatives

The synthesis of 2-(dicyanomethylene)-1,2-dihydropyridine derivatives from the reactions of arylmethylidene derivatives of malononitrile dimers with 1,3-dicarbonyl compounds is described.     

Poly(vinyl alcohol)/heteropolyacid nanocomposites as new materials for radiochromic dosimetry in radiation processing

Radiochromic films composed of polymer matrices and organic dyes are widely used for routine dosimetry purposes in operation of various radiation facilities—gamma and X-ray-irradiation, electron accelerators, and so on. However, the sensitivity of these films rapidly decreases at doses exceeding 30–50 kGy due to a saturation of their optical response, making them unsuitable for accurate dosimetry in radiation processing of polymers and composites where doses up to 200 kGy are typically employed. To overcome this limitation, the use of inorganic substances as the coloring agents of polymer-based radiochromic films was proposed in this paper, specifically, heteropolyacidacid H₃PW₁₂O₄₀ (tungstophosphoric acid) in the matrix of poly(vinyl alcohol) (PVA). Nanocomposite PVA/H₃PW₁₂O₄₀ films were prepared by solution casting and their optical responses toward ⁶⁰Co gamma radiation and beams of 6 MeV electrons for a dose range of 10–200 kGy were investigated. It was established that upon exposure to gamma rays and electron beams, the films turn blue and a broad absorption band at 750 nm appears in their spectra. Importantly, the radiation-induced optical absorption increases in a linear fashion up to the dose of 150 kGy and only slightly deviates from linearity at 200 kGy. Moreover, it was found that the PVA/H₃PW₁₂O₄₀ films have a long shelf life, are dose-rate independent within a wide range, and color-stable after irradiation. All these features make the nanocomposite PVA/H₃PW₁₂O₄₀ films promising for use as routine dosimeters and dose labels in a much wider range of high doses as compared to radiochromic films based on organic dyes.     

Heterogeneous Catalysis and Parahydrogen-Induced Polarization

Parahydrogen-induced polarization with heterogeneous catalysts (HET-PHIP) has been a subject of extensive research in the last decade since its first observation in 2007. While NMR signal enhancements obtained with such catalysts are currently below those achieved with transition metal complexes in homogeneous hydrogenations in solution, this relatively new field demonstrates major prospects for a broad range of advanced fundamental and practical applications, from providing catalyst-free hyperpolarized fluids for biomedical magnetic resonance imaging (MRI) to exploring mechanisms of industrially important heterogeneous catalytic processes. This review covers the evolution of the heterogeneous catalysts used for PHIP observation, from metal complexes immobilized on solid supports to bulk metals and single-atom catalysts and discusses the general visions for maximizing the obtained NMR signal enhancements using HET-PHIP. Various practical applications of HET-PHIP, both for catalytic studies and for potential production of hyperpolarized contrast agents for MRI, are described.     

The Effect of Growth Parameters on Electrophysical and Memristive Properties of Vanadium Oxide Thin Films

We have experimentally studied the influence of pulsed laser deposition parameters on the morphological and electrophysical parameters of vanadium oxide films. It is shown that an increase in the number of laser pulses from 10,000 to 60,000 and an oxygen pressure from 3 × 10⁻⁴ Torr to 3 × 10⁻² Torr makes it possible to form vanadium oxide films with a thickness from 22.3 ± 4.4 nm to 131.7 ± 14.4 nm, a surface roughness from 7.8 ± 1.1 nm to 37.1 ± 11.2 nm, electron concentration from (0.32 ± 0.07) × 10¹⁷ cm⁻³ to (42.64 ± 4.46) × 10¹⁷ cm⁻³, electron mobility from 0.25 ± 0.03 cm²/(V·s) to 7.12 ± 1.32 cm²/(V·s), and resistivity from 6.32 ± 2.21 Ω·cm to 723.74 ± 89.21 Ω·cm. The regimes at which vanadium oxide films with a thickness of 22.3 ± 4.4 nm, a roughness of 7.8 ± 1.1 nm, and a resistivity of 6.32 ± 2.21 Ω·cm are obtained for their potential use in the fabrication of ReRAM neuromorphic systems. It is shown that a 22.3 ± 4.4 nm thick vanadium oxide film has the bipolar effect of resistive switching. The resistance in the high state was (89.42 ± 32.37) × 10⁶ Ω, the resistance in the low state was equal to (6.34 ± 2.34) × 10³ Ω, and the ratio R_HRS/R_LRS was about 14,104. The results can be used in the manufacture of a new generation of micro- and nanoelectronics elements to create ReRAM of neuromorphic systems based on vanadium oxide thin films.     

AgNP-decorated SBA-15 for MWCNT Paste Modified Electrode: A Sensor for Simultaneous Voltammetric Determination of Paracetamol and Sulfamethoxazole

A new electrochemical sensor based on a carbon nanotube paste electrode modified with a Santa Barbara Amorphous material (SBA-15) decorated with silver nanoparticles, namely CNT/SBA/Ag-PE, was developed. It was successfully applied for individual and simultaneous determination of both paracetamol (PC) and sulfamethoxazole (SMZ) medicines. The electrode exhibited a linear dynamic range of 0.12–110 μmol L⁻¹ for paracetamol and 0.06–70 μmol L⁻¹ for sulfamethoxazole, and detection limits of 38 and 19 nmol L⁻¹, respectively. The proposed sensor offered high sensitivity, fast response time and the potential for detecting both drugs simultaneously. The CNT/SBA/Ag-PE enabled the simultaneous determination of PC and SMZ in urine samples with high recovery rates.     

Excitation dependent quenching of luminescence in LED phosphors

Droop, the decrease of efficiency with increased power density, became a major topic with InGaN LEDs, after its introduction in 2007. This paper provides insight into droop in localized center luminescence phosphors, exemplified here by Eu²⁺ doped materials. This topic is of increasing importance, as high brightness blue LEDs have reached outputs >1 W/mm². The nonlinearities in phosphor quantum efficiency result in drive‐dependent color point shift and reduction of overall efficiency of phosphor converted white LEDs which utilize Eu²⁺ activated phosphors. The efficiency quenching can be traced back to two processes, well‐known in laser physics, excited state absorption or/and cross relaxation by Foerster/Dexter transfer. Both processes lead to reduction in phosphor efficiency, but they can be differentiated. Understanding the root cause of efficiency quenching opens ways to minimize the practical consequences. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Ordering in spatially anisotropic triangular antiferromagnets

We investigate the phase diagram of the anisotropic spin-1/2 triangular lattice antiferromagnet, with interchain diagonal exchange J' much weaker than the intrachain exchange J. We find that fluctuations lead to a competition between (commensurate) collinear antiferromagnetic and (zigzag) dimer orders. Both states differ in symmetry from the spiral order known to occur for larger J', and are therefore separated by quantum phase transitions from it. The zero-field collinear antiferromagnet is succeeded in a magnetic field by magnetically ordered spin-density-wave and cone phases, before reaching the fully polarized state. Implications for the anisotropic triangular magnet Cs2CuCl4 are discussed.     

A mini-landscape of exact MSSM spectra in heterotic orbifolds

We explore a “fertile patch” of the heterotic landscape based on a Z₆-II${\mathbb{Z}}_6\text{-II}$ orbifold with SO(10) and E₆ local GUT structures. We search for models allowing for the exact MSSM spectrum. Our result is that of order 100 out of a total 3×¹⁰⁴$3\times {10}^4$ inequivalent models satisfy this requirement.