Controlled Synthesis of Thorium and Uranium Oxide Nanocrystals

Very little is known about the size and shape effects on the properties of actinide compounds. As a consequence, the controlled synthesis of well‐defined actinide‐based nanocrystals constitutes a fundamental step before studying their corresponding properties. In this paper, we report on the non‐aqueous surfactant‐assisted synthesis of thorium and uranium oxide nanocrystals. The final characteristics of thorium and uranium oxide nanocrystals can be easily tuned by controlling a few experimental parameters such as the nature of the actinide precursor and the composition of the organic system (e.g., the chemical nature of the surfactants and their relative concentrations). Additionally, the influence of these parameters on the outcome of the synthesis is highly dependent on the nature of the actinide element (thorium versus uranium). By using optimised experimental conditions, monodisperse isotropic uranium oxide nanocrystals with different sizes (4.5 and 10.7 nm) as well as branched nanocrystals (overall size ca. 5 nm), nanodots (ca. 4 nm) and nanorods (with ultra‐small diameters of 1 nm) of thorium oxide were synthesised.     

Chiral Fluorinated α‐Sulfonyl Carbanions: Enantioselective Synthesis and Electrophilic Capture,Racemization Dynamics,and Structure

Enantiomerically pure triflones R¹CH(R²)SO₂CF₃ have been synthesized starting from the corresponding chiral alcohols via thiols and trifluoromethylsulfanes. Key steps of the syntheses of the sulfanes are the photochemical trifluoromethylation of the thiols with CF₃Hal (Hal=halide) or substitution of alkoxyphosphinediamines with CF₃SSCF₃. The deprotonation of RCH(Me)SO₂CF₃ (R=CH₂Ph, iHex) with nBuLi with the formation of salts [RC(Me)? SO₂CF₃]Li and their electrophilic capture both occurred with high enantioselectivities. Displacement of the SO₂CF₃ group of (S)‐MeOCH₂C(Me)(CH₂Ph)SO₂CF₃ (95 % ee) by an ethyl group through the reaction with AlEt₃ gave alkane MeOCH₂C(Me)(CH₂Ph)Et of 96 % ee. Racemization of salts [R¹C(R²)SO₂CF₃]Li follows first‐order kinetics and is mainly an enthalpic process with small negative activation entropy as revealed by polarimetry and dynamic NMR (DNMR) spectroscopy. This is in accordance with a C_α? S bond rotation as the rate‐determining step. Lithium α‐(S)‐trifluoromethyl‐ and α‐(S)‐nonafluorobutylsulfonyl carbanion salts have a much higher racemization barrier than the corresponding α‐(S)‐tert‐butylsulfonyl carbanion salts. Whereas [PhCH₂C(Me)SO₂tBu]Li/DMPU (DMPU = dimethylpropylurea) has a half‐life of racemization at ?105 °C of 2.4 h, that of [PhCH₂C(Me)SO₂CF₃]Li at ?78 °C is 30 d. DNMR spectroscopy of amides (PhCH₂)₂NSO₂CF₃ and (PhCH₂)N(Ph)SO₂CF₃ gave N? S rotational barriers that seem to be distinctly higher than those of nonfluorinated sulfonamides. NMR spectroscopy of [PhCH₂C(Ph)SO₂R]M (M=Li, K, NBu₄; R=CF₃, tBu) shows for both salts a confinement of the negative charge mainly to the C_α atom and a significant benzylic stabilization that is weaker in the trifluoromethylsulfonyl carbanion. According to crystal structure analyses, the carbanions of salts {[PhCH₂C(Ph)SO₂CF₃]Li? L }₂ ( L =2 THF, tetramethylethylenediamine (TMEDA)) and [PhCH₂C(Ph)SO₂CF₃]NBu₄ have the typical chiral C_α? S conformation of α‐sulfonyl carbanions, planar C_α atoms, and short C_α? S bonds. Ab initio calculations of [MeC(Ph)SO₂tBu]^? and [MeC(Ph)SO₂CF₃]^? showed for the fluorinated carbanion stronger n_C→σ* and n_O→σ* interactions and a weaker benzylic stabilization. According to natural bond orbital (NBO) calculations of [R¹C(R²)SO₂R]^? (R=tBu, CF₃) the n_C→σ*_{S? R} interaction is much stronger for R=CF₃. Ab initio calculations gave for [MeC(Ph)SO₂tBu]Li ? 2 Me₂O an O,Li,C_α contact ion pair (CIP) and for [MeC(Ph)SO₂CF₃]Li ? 2 Me₂O an O,Li,O CIP. According to cryoscopy, [PhCH₂C(Ph)SO₂CF₃]Li, [iHexC(Me)SO₂CF₃]Li, and [PhCH₂C(Ph)SO₂CF₃]NBu₄ predominantly form monomers in tetrahydrofuran (THF) at ?108 °C. The NMR spectroscopic data of salts [R¹(R²)SO₂R³]Li (R³=tBu, CF₃) indicate that the dominating monomeric CIPs are devoid of C_α? Li bonds.     

Fatty acid desaturation index in human plasma: comparison of different analytical methodologies for the evaluation of diet effects

Stearoyl-CoA desaturase 1 (SCD1) plays a role in the development of obesity and related conditions, such as insulin resistance, and potentially also in neurological and heart diseases. The activity of SCD1 can be monitored using the desaturation index (DI), the ratio of product (16:1n-7 and 18:1n-9) to precursor (16:0 and 18:0) fatty acids. Here, different analytical strategies were applied to identify the method which best supports SCD1 biology. A novel effective approach was the use of the SCD1-independent fatty acid (16:1n-10) as a negative control. The first approach was based on a simple extraction followed by neutral loss triglyceride fatty acid analysis. The second approach was based on the saponification of triglycerides followed by fatty acid analysis (specific for the position of the double bond within monounsaturated fatty acids (MUFAs)). In addition to the analytical LC-MS assays, different matrices (plasma total triglyceride fraction and the very low-density lipoprotein (VLDL) fraction) were investigated to identify the best for studying changes in SCD1 activity. Samples from volunteers on a high-carbohydrate diet were analyzed. Both ultra HPLC (UHPLC)-MS-based assays showed acceptable accuracies (75–125 % of nominal) and precisions (<20 %) for the analysis of DI-specific fatty acids in VLDL and plasma. The most specific assay for the analysis of the liver SCD activity was then validated for specificity and selectivity, intra- and interday accuracy and precision, matrix effects, dilution effects, and analyte stability. After 3 days of high-carbohydrate diet, only the specific fatty acids in human plasma VLDL showed a significant increase in DI and associated SCD1 activity.     

A comparison of viscoelastic and empirical rheological models in context of squeeze flows

This work compares the behavior of a Giesekus and Carreau-Yasuda fluid in a squeeze flow between two circular plates. In order to do this the Carreau-Yasuda model is fitted to the shear viscosity curve of the Giesekus model and the squeeze stress is compared over the process time. The investigations are performed numerically with a 2.5 dimensional wedge model. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photochemical Hydrogen Storage with Hexaazatrinaphthylene

When irradiated with violet light, hexaazatrinaphthylene (HATN) extracts a hydrogen atom from an alcohol forming a long-living hydrogenated species. The apparent kinetic isotope effect for fluorescence decay time in deuterated methanol (1.56) indicates that the lowest singlet excited state of the molecule is a precursor for intermolecular hydrogen transfer. The photochemical hydrogenation occurs in several alcohols (methanol, ethanol, isopropanol) but not in water. Hydrogenated HATN can be detected optically by an absorption band at 1.78 eV as well as with EPR (electron paramagnetic resonance) and NMR techniques. Mass spectrometry of photoproducts reveal di-hydrogenated HATN structures along with methoxylated and methylated HATN molecules which are generated through the reaction with methoxy radicals (remnants from alcohol splitting). Experimental findings are consistent with the theoretical results which predicted that for the excited state of the HATN-solvent molecular complex, there exists a barrierless hydrogen transfer from methanol but a small barrier for the similar oxidation of water.     

Self‐Assembly of a Highly Organized,Hexameric Supramolecular Architecture: Formation,Structure and Properties

Two derivatives, ³ L and ⁹ L , of a ditopic, multiply hydrogen‐bonding molecule, known for more than a decade, have been found, in the solid state as well as in solvents of low polarity at room temperature, to exist not as monomers, but to undergo a remarkable self‐assembly into a complex supramolecular species. The solid‐state molecular structure of ³ L , determined by single‐crystal X‐ray crystallography, revealed that it forms a highly organized hexameric entity ³ L ₆ with a capsular shape, resulting from the interlocking of two sets of three monomolecular components, linked through hydrogen‐bonding interactions. The complicated ¹H NMR spectra observed in o‐dichlorobenzene (o‐DCB) for ³ L and ⁹ L are consistent with the presence of a hexamer of D₃ symmetry in both cases. DOSY measurements confirm the hexameric constitution in solution. In contrast, in a hydrogen‐bond‐disrupting solvent, such as DMSO, the ¹H NMR spectra are very simple and consistent with the presence of isolated monomers only. Extensive temperature‐dependent ¹H NMR studies in o‐DCB showed that the L ₆ species dissociated progressively into the monomeric unit on increasing th temperature, up to complete dissociation at about 90 °C. The coexistence of the hexamer and the monomer indicated that exchange was slow on the NMR timescale. Remarkably, no species other than hexamer and monomer were detected in the equilibrating mixtures. The relative amounts of each entity showed a reversible sigmoidal variation with temperature, indicating that the assembly proceeded with positive cooperativity. A full thermodynamic analysis has been applied to the data.     

Ultra‐Small Plutonium Oxide Nanocrystals: An Innovative Material in Plutonium Science

Apart from its technological importance, plutonium (Pu) is also one of the most intriguing elements because of its non‐conventional physical properties and fascinating chemistry. Those fundamental aspects are particularly interesting when dealing with the challenging study of plutonium‐based nanomaterials. Here we show that ultra‐small (3.2±0.9 nm) and highly crystalline plutonium oxide (PuO₂) nanocrystals (NCs) can be synthesized by the thermal decomposition of plutonyl nitrate ([PuO₂(NO₃)₂] ? 3 H₂O) in a highly coordinating organic medium. This is the first example reporting on the preparation of significant quantities (several tens of milligrams) of PuO₂ NCs, in a controllable and reproducible manner. The structure and magnetic properties of PuO₂ NCs have been characterized by a wide variety of techniques (powder X‐ray diffraction (PXRD), X‐ray absorption fine structure (XAFS), X‐ray absorption near edge structure (XANES), TEM, IR, Raman, UV/Vis spectroscopies, and superconducting quantum interference device (SQUID) magnetometry). The current PuO₂ NCs constitute an innovative material for the study of challenging problems as diverse as the transport behavior of plutonium in the environment or size and shape effects on the physics of transuranium elements.     

On the Electronic Structure and Photochemistry of Coordinatively Unsaturated Complexes: The Case of Nickel Bis‐dinitrogen,Ni(N2)2

The electronic ground and excited states of the coordinatively unsaturated complex Ni(η¹‐N₂)₂, isolated in an Ar matrix, are analyzed in detail by vibrational and electronic absorption and emission spectroscopies allied with quantum chemical calculations. The bond force constants are determined from a normal coordinate analysis and compared with those of the isoelectronic carbonyl complex. The consequences for the bond properties are discussed, and the trend in the force constants is compared with the standard formation enthalpies. The linear complex Ni(η¹‐N₂)₂ with two terminal dinitrogen ligands can be photoisomerized to two isomeric, metastable forms Ni(η¹‐N₂)(η²‐N₂) and Ni(η²‐N₂)₂, with one and two side‐on coordinated dinitrogen ligands, respectively.     

Counting of Oxygen Defects versus Metal Surface Sites in Methanol Synthesis Catalysts by Different Probe Molecules

Different surface sites of solid catalysts are usually quantified by dedicated chemisorption techniques from the adsorption capacity of probe molecules, assuming they specifically react with unique sites. In case of methanol synthesis catalysts, the Cu surface area is one of the crucial parameters in catalyst design and was for over 25 years commonly determined using diluted N₂O. To disentangle the influence of the catalyst components, different model catalysts were prepared and characterized using N₂O, temperature programmed desorption of H₂, and kinetic experiments. The presence of ZnO dramatically influences the N₂O measurements. This effect can be explained by the presence of oxygen defect sites that are generated at the Cu‐ZnO interface and can be used to easily quantify the intensity of Cu‐Zn interaction. N₂O in fact probes the Cu surface plus the oxygen vacancies, whereas the exposed Cu surface area can be accurately determined by H₂.     

New engineering polymers for blow-moulding

The combination of using high performance flexible engineering polymers and their processing by blow moulding technology allows traditional rubber and rubber-metal composite parts to be replaced to obtain improved performance, lower cost and greater design freedom. Two examples of automobile applications are detailed to support this concept - constant velocity joint boots and engine air ducting.