Beitr?ge zur Bestimmung von Spurenverunreinigungen in UO2-Kernbrennstoff

Zusammenfassung Die für die Bestimmung geringer Gehalte an Phosphor, Silicium, Fluor, Chlor, Lithium, Natrium, Calcium und Kohlenstoff in UO₂-Kernbrennstoff angewandten chemischen Analysenverfahren werden beschrieben. Durch Kombination einfacher und blindwertfreier Abtrennungsverfahren (Extraktionen und Pyrohydrolysen) mit empfindlichen physikalischchemischen Bestimmungsmethoden (Spektralphotometrie, Flammenphotometrie, coulometrische Titration) lassen sich Nachweisgrenzen zwischen 0,1 und 10 ppm bei Probeneinwaage von 0,5–1 g UO₂ erreichen. Der Zeitaufwand für die Analysen kann durch simultane Bestimmung zweier oder dreier Elemente in einem Arbeitsgang niedriggehalten werden. Die beschriebenen Verfahren haben sich bei Reinheitskontrollen von Kernbrennstoffen gut bewährt.

---

Summary Analytical methods have been developed for the determination of trace amounts of phosphorus, silicon, fluorine, chlorine, lithium, sodium, calcium, and carbon in UO₂ of nuclear purity. By combination of simple and rapid separation procedures (extraction, pyrohydrolysis) with highly sensitive methods of determination (spectrophotometry, flame photometry, coulometric titration) detection limits of 0.1–10 ppm have been obtained with sample sizes of 0.5–1 g. In order to reduce the time needed for analysis, some of the above elements are determined simultaneously. The methods described have been successfully applied to the purity control of nuclear fuels.

---

---

Herrn Dr. W. Gebauhr danken wir für wertvolle Anregungen und Diskussionen.     

Quantitative Bestimmung der Catechine und Hydroxyzimts?uren in pflanzlichen Lebensmitteln

Zusammenfassung Die Problematik der Bestimmung von Catechinen und Hydroxyzimtsäuren in pflanzlichen Lebensmitteln wird diskutiert und gezeigt, daß es notwendig ist, eine ausreichende Vorreinigung (Säulen-Chromatographie an Polyamid und Dünnschicht-Chromatographie an Cellulose bzw. Kieselgel) mit einem geeigneten Bestimmungsverfahren (Spektralphotometrie mit Vanillin/Salzsäure bzw. direkt) zu kombinieren. Beispiele werden beschrieben.Plenarvortrag anläßlich der Tagung Spurenanalyse, 2.–5. April 1973 in Erlangen.     

Zur Fehlerermittlung bei der photometrischen Eisenbestimmung in Glassanden

Zusammenfassung Zur Bestimmung des Eisengehaltes in Glassanden eignet sich die o-Phenanthrolinmethode, da diese Methode frei ist von störenden Einflüssen der im Sand neben dem Eisen vorliegenden Fremdionen.Der Analysenfehler wird dabei aus den Eichmessungen nach den Methoden der Ausgleichsrechnung und mathematischen Statistik rechnerisch ermittelt und bei der Auswertung des Analysenergebnisses in geeigneter Form berücksichtigt.

---

Summary For the determination of the iron content in glass sands the o-phenanthroline method is suitable because it is unaffected by foreign ions occuring in the sand besides iron.The analytical error is calculated from the calibrating measurements according to the methods of balancing computation and mathematical statistics, and is taken into account on interpreting the analytical result in a suitable form.

---

---

Herrn Dr. Moritz danken wir für die Anregung zu dieser Arbeit, Herrn Dr.-Ing. habil. Klaus Doerffel für wertvolle Hinweise zur mathematischen Auswertung.     

Propane fuel cells using phosphoric-acid-doped polybenzimidazole membranes

Propane fuel cells using H(3)PO(4)-doped polybenzimidazole polymer membranes produce low and unsustainable current densities at temperatures up to 250 degrees C under anhydrous conditions. Stable intermediate species blocked the surface of noble metal anode catalysts, and the intermediate species could not react further into desorbable final products. In contrast, when water was introduced by light humidification (S(r) 0.08%) of the propane stream, sustainable and higher current densities were achieved. Water participated in the reaction sequence to form surface-bound hydrocarbon and then oxygen-containing intermediates and thereby generated CO and CO(2) as the only carbon-containing products.     

Surface tension of quantum fluids from molecular simulations

We present the first molecular simulations of the vapor-liquid surface tension of quantum liquids. The path integral formalism of Feynman was used to account for the quantum mechanical behavior of both the liquid and the vapor. A replica-data parallel algorithm was implemented to achieve good parallel performance of the simulation code on at least 32 processors. We have computed the surface tension and the vapor-liquid phase diagram of pure hydrogen over the temperature range 18-30 K and pure deuterium from 19 to 34 K. The simulation results for surface tension and vapor-liquid orthobaric densities are in very good agreement with experimental data. We have computed the interfacial properties of hydrogen-deuterium mixtures over the entire concentration range at 20.4 and 24 K. The calculated equilibrium compositions of the mixtures are in excellent agreement with experimental data. The computed mixture surface tension shows negative deviations from ideal solution behavior, in agreement with experimental data and predictions from Prigogine's theory. The magnitude of the deviations at 20.4 K are substantially larger from simulations and from theory than from experiments. We conclude that the experimentally measured mixture surface tension values are systematically too high. Analysis of the concentration profiles in the interfacial region shows that the nonideal behavior can be described entirely by segregation of H(2) to the interface, indicating that H(2) acts as a surfactant in H(2)-D(2) mixtures.     

Influence of initial oxygen coverage and magnetic moment on the NO decomposition on rhodium (111)

In this study, density functional theory calculations were performed to investigate the influence of oxygen preoccupation on the nitrogen oxide decomposition on rhodium. Besides gauging the coverage dependence of the adsorption energy of NO on the (111) rhodium facet, the influence of the initial oxygen coverage on the kinetics and thermodynamics of the nitrogen oxide decomposition reaction was also studied. The results are discussed with respect to a novel NOx decomposition catalyst. Furthermore, the influence of spin effects on the adsorption geometry as well as the adsorption energy is examined. It will be addressed why spin effects only have a minor influence on the behavior of NO on a rhodium surface.     

The thiazolium-catalyzed Sila-Stetter reaction: conjugate addition of acylsilanes to unsaturated esters and ketones

A new acyl anion addition reaction between acylsilanes and alpha,beta-unsaturated conjugate acceptors promoted by a nucleophilic organic catalyst has been disclosed. The 1,4-dicarbonyl products produced in this reaction are highly useful synthons. Neutral carbenes (or zwitterions) generated in situ from commercial thiazolium salts are used as effective catalysts for the reaction which is in contrast to established anionic catalysts typically employed to promote the required Brook rearrangement (1,2-silyl shift from carbon to oxygen) involved in the reported reaction. This process successfully utilizes acylsilanes as tunable acyl anion progenitors and is tolerant of a wide range of structural diversity on the acylsilane or the conjugate acceptor.     

Pyrolysis studies of aromatic polyesters

The products of pyrolysis, at 400°C in vacuo (1 Pa), of poly(ethyleneterephthalate) (PET) and poly(butyleneterephthalate) (PBT) were studied. The products were identified by gas chromatography/mass spectrometry technique. The highly volatile products of PET contained acetaldehyde, benzene, toluene, styrene and ethylbenzene and in the case of PBT, butadiene, tetrahydrofuran, vinylcyclohexene and ethylbenzene were the major products. A qualitative analysis of the products of low volatility revealed that the main components were benzoic acid, terephthalic acid, monovinyl esters of terephthalic acid and higher oligomers in the case of PET, whereas benzoic acid, monobutenyl esters of terephthalic acid and higher oligomers were the main products from PBT. The results obtained were in good agreement with those obtained from pyrolysis experiments, carried out directly in the mass spectrometer. Mechanisms to explain the occurrence of the different products are proposed.     

Carbene ligands as anthracyclinone-synthons-ii : Chromium mediated cycloaddition of alkynes, carbenes and carbon monoxide: application to ring b synthesis in anthracyclinones

The cycloaddition of Cr-co-ordinated alkyne, carbene and carbonyl ligands provides a variable route to the anthracyclinone skeleton. The key step of a formal total synthesis of4-demethoxydaunomycinone (1) is based on the reaction of carbonyl-carbene complex 15—used as a CD ring synthon—and alkyne 9 leading to the formation of ring B.     

Quality assurance system for a decomposition method as demonstrated for the Wickbold combustion technique

 A five-step model for a quality assurance system is developed for an internal quality control check. It includes the quality control of the decomposition method and the detection method as steps belonging together. The Wickbold combustion technique as decomposition method in combination with atomic absorption spectrometry was chosen. The vaporization of the elements mercury, arsenic, lead, antimony and selenium is based on combustion in an oxyhydrogen flame. To check the efficiency of the analytical system, the uncertainty of results was calculated on the basis of the "Guide to the Expression of Uncertainty in Measurement". Received: 13 January 1997 · Accepted: 29 March 1997