Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Synthesis of 5,6-dihydro-4H-thiopyran-4-ones

The anions of 1,4-diaryl-3-buten-2-ones 1 reacts with arylisothiocyanates, yielding intermediates 4 which can ring close to 5,6-dihydro-4H-thiopyran-4-ones 5 . Under similar reaction conditions ethyl 3-oxo-4-pentenoates 7 gives the 6-spiropyrans 9 . Methylation of 3 gives the S-methylated open form 6 .     

Two novel four-coordinated zinc(II) complexes [Zn(dmatrz)<Subscript>2</Subscript>Cl<Subscript>2</Subscript>] and [Zn(dmatrz)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>] exhibiting strong blue fluorescent properties

Two novel complexes, [Zn(dmatrz)₂]Cl₂ (1) and [Zn(dmatrz)₂(SCN)₂] (2), have been prepared and characterized by X-ray crystallography, absorption and luminescence spectrometries (dmatrz=3,5-dimethy-4-amino-1,2,4-triazole). The coordination environment of the zinc(II) ions in (1) and (2) has a distorted tetrahedral geometry completed via two independent nitrogen atoms of two triazole ligands and two anions, respectively. Both (1) and (2) show strong blue luminescence properties. Furthermore, (1) displays stronger blue photoluminescence than (2) as the result of different anions (Cl^- and SCN^-) coordinated to the zinc(II) ions.     

Hydrogen peroxide oxidation of di(hydroxo)platinum(II) species in carboxylic acids

A facile procedure for synthesizing the mono(hydroxo)tris(carboxylato)platinum(IV) species has been achieved. The reaction of [Pt^II(OH)₂(dmpda)] (dmpda=2,2-dimethyl-1,3-propanediamine) with a 30% aqueous solution of H₂O₂ in the presence of a carboxylic acid produces a stable [Pt^IV(OOCR)₃(OH)(dmpda)] (R=Me, Et) complex in high yield. The crystal structures of [Pt^IV(OOCMe)₃(OH)(dmpda)] . H₂O (triclinic P1 bar, a=8.761(2) Å, b=9.245(3) Å, c=10.659(2) Å, =106.25(2)°, =93.90(2)°, =98.92(2)°, V=813.1(3) ų, Z=2, R= 0.0474) and [Pt^IV(OOCEt)₃(OH)(dmpda)] (monoclinic P2₁/c, a=12.777(4) Å, b=10.514(2) Å, c=14.971(3) Å, =107.40(2)°, V=1919.2(8) ų, Z=4, R=0.0611) show that the hydroxyl group has been selectively positioned at an axial site. The intramolecular hydrogen bond between the OH and C=O moiety exists (O(H)...=C, 2.83 Å for [Pt^IV(OOCMe)₃(OH)(dmpda)] · H₂O; 2.72 Å for [Pt^IV(OOCEt)₃(OH)(dmpda)]. Formation of the axial-mono(hydroxo)tris(carboxylato)platinum(IV) species may be ascribed to a combination of `reactive-equatorial effects' with `cis-addition' in the carboxylic acid.     

Selective flow injection analysis of ultra-trace amounts of Cr(VI), preconcentration of it by solvent extraction, and determination by electrothermal atomic absorption spectrometry (ETAAS)

A rapid, robust, sensitive and selective time-based flow injection (FI) on-line solvent extraction system interfaced with electrothermal atomic absorption spectrometry (ETAAS) is described for analyzing ultra-trace amounts of Cr(VI). The sample is initially mixed on-line with isobutyl methyl ketone (IBMK). The Cr(VI) is complexed by reaction with ammonium pyrrolidine dithiocarbamate (APDC), and the non-charged Cr(VI)–PDC chelate formed is extracted into IBMK in a knotted reactor made from PTFE tubing. The organic extractant is separated from the aqueous phase by a gravity phase separator with a small conical cavity and delivered into a collector tube, from which 55 μl organic concentrate is subsequently introduced via an air flow into the graphite tube of the ETAAS instrument. The operations of the FI-system and the ETAAS detector are synchronously coupled. A significant advantage of the approach is that matrix constituents, such as high salt contents, effectively are eliminated. The extraction procedure was optimized by a simplex approach. A central composite design was subsequently employed to verify the estimated operational optimum. An 18-fold enhancement in sensitivity of Cr(VI) was achieved after preconcentration for 99 s at a sample flow rate of 5.5 ml min⁻¹, as compared to direct introduction of 55 μl of sample, yielding a detection limit (3σ) of 3.3 ng l⁻¹. The sampling frequency was 24.2 samples h⁻¹. The proposed method was successfully evaluated by analyzing a NIST Cr(VI)-reference material, synthetic seawater and waste waters, and waste water samples from an incineration plant and a desulphurization plant, respectively.     

Study on multimers and their structures in molecular association mixture

Self-association system of(R)-1,3-butanediol in dilute carbon tetrachloride(CCl4)solution is studied as a model of molecular association mixture.Analysis methods including FSMWEFA(fixed-size moving window evolving factor analysis)combined with PCA(principal component analysis),SIMPLISMA (simple-to-use interactive self-modeling mixture analysis),and ITTFA(iterative target transformation factor analysis)are adopted to resolve infrared spectra of(R)-1,3-butanediol solution.Association number and equilibrium constant are computed.(R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system.Theoretical investigation of trimer structures is carried out with DFT(density functional theory),and structural factors are analyzed.     

<Emphasis Type="Italic">Brønsted</Emphasis> Acids in Ionic Liquids: Fundamentals,Organic Reactions,and Comparisons

Summary. A background for studying acids in various solvents is developed, emphasizing the importance of knowing to what extent a solvent conducts electricity and is therefore ionized, the dissociation equilibria of common molecular solvents and the acidic and basic species generated by solvent leveling. Acidity measurements in the atypical solvent water are discussed and the common method of expressing acidity in other systems – by Hammett values – is introduced. Representative examples of reactions involving Br?nsted acids in ionic liquids are presented and attention paid to the questions of speciation and acidity values. It is found that the gas phase proton affinity of a base is often a better guide to the acidity of its conjugate acid in an ionic liquid than is the dissociation constant of the said acid in water.     

An approach to sequence-specific antibody proteases

We describe here a novel strategy for the isolation of antibodies with sequence-specific protease activity: the synthesis of dipeptide haptens in which the targeted peptide bond has been replaced by a ring-strained or torsionally strained hydroxyethylene transition-state analog. Thus, the analogs mimic both a peptide bond in a distorted, reactive conformation and the transition state for peptide bond hydrolysis. In order to obtain sequence-specific antibody proteases, these analogs have been flanked with additional amino acid residues in preparation for immunization. In particular, we have synthesized peptides containing analogs such as 2-cis-amino-3-cis-hydroxycyclobutane carboxylic acid andendo-(3-amino-2-hydroxy)bicyclo[2.2.1]heptane-7-anti-carboxylic acid. We have also prepared a series of peptide derivatives containing analogs, such as 2-[3-amino-2-oxo-1-azetidinyl]-3-methylbutanoic acid, in which the targeted peptide bond has been incorporated into a β-lactam ring. Since the “peptide bond” has been left intact, these species mimic only a distorted ground state. At present, antibodies are being elicited against a number of the above peptide derivatives.     

Phenanthroline complexes bearing diamide-anion recognition sites

The synthesis and anion binding properties of new ruthenium(II) and cobalt(II) phenanthroline complexes, containing two amide subunits are described. Evidence for anion binding in dimethyl sulfoxide (DMSO) solution was obtained from u.v.–vis titration experiments. Results indicated that these receptors showed strong affinity for F⁻ and AcO⁻, and showed weak affinity for OH⁻ and H₂PO ₄ ⁻ , and showed no affinity for Cl⁻, Br⁻, I⁻. These receptors interacted with various anions examined through hydrogen-bond formation.