Analysis of natural flavonoids by microchip-micellar electrokinetic chromatography with pulsed amperometric detection

Catechins (catechin and other derivatives) are naturally occurring flavonoids present in a number of plants and foods. They are also part of numerous nutraceutical formulations because they are believed to have antioxidant, cancer chemo-preventative, anti-inflammatory and antimicrobial properties. The determination of catechins has traditionally been performed by HPLC. However, this methodology is both time and sample intensive and generates large amounts of organic solvent waste. In the current report, an application of MEKC using a PDMS microchip is presented for the analysis of catechins. The system uses pulsed amperometric detection for direct analysis of important naturally occurring catechins. The effect of pH, surfactant concentration, detection potential and signal stability were analyzed. Linear relationships were found between the concentration and peak current, with good stability and limits of detection of 8 [micro sign]M for catechin, epigallocatechin gallate and epicatechin, and 14 [micro sign]M for epicatechin gallate. Optimum conditions were applied to the detection of selected catechins in a commercially available green tea extract nutraceutical and the results were compared to HPLC analysis. The analysis using microchip micellar electrokinetic chromatography and pulsed amperometric detection was completed in 4.5 min, 10 times faster than the HPLC analysis.     

Simultaneous determination of difloxacin and its primary metabolite sarafloxacin in rabbit plasma

Summary An HPLC method with fluorescence detection is presented for the analysis of difloxacin (DIF) and sarafloxacin (SAR) in rabbit plasma using norfloxacin (NOR) as internal standard (Figure 1). Plasma sample preparations were carried out by adding phosphate buffer (pH 7.4, 0.1 M), followed by extraction with trichloromethane. Fluoroquinolones were separated on a reversed-phase column using an aqueous phosphate solution-acetonitrile (82:18) mobile phase. The concentrations of NOR, SAR and DIF eluting off the column, with retention times of 2.16, 5.60 and 6.20, respectively, were monitored by fluorescence detection atλ _ex 338 andλ _em 425 nm. The quantitation limit was 12 ng mL⁻¹ for SAR and DIF. Standard curves were linearly related to concentration in the range from 1 to 1500 ng mL⁻¹. Recovery was determined as 76% and 70% for SAR and DIF, respectively. Inter-and intraassay coefficients of variation were less than 6% for all compounds.     

3,5-Bis(ferrocenylmethylene)-1-methyl-4-methylenepiperidine. Synthesis and some chemical properties

3,5-Bis(ferrocenylmethylene)-1-methyl-4-methylenepiperidine, a diferrocenyltriene with a fixeds-cisoid conformation of the exocyclic double bonds, was synthesized. On heating, this compound cyclodimerizes according to the [4+2]-cycloaddition scheme; it forms Diels-Alder adducts with azodicarboxylic and maleic acidN-phenylimides. The compound easily cyclodimerizes in the presence of acids by a proton cyclodimerization mechanism to give a spiro cyclodimer. The triene also adds a 3,5-bis(ferrocenylmethylene)-1,4-dimethyl-1-azonia-4-cyclohexyl salt to the terminal methylene group yielding linear and cyclic addition products. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 511–516, March, 2000.     

Size‐Tunable Micron‐Bubbles Based on Fluorous–Fluorous Interactions of Perfluorinated Dendritic Polyglycerols

This paper describes the behavior of various generations of polyglycerol dendrimers that contain a perfluorinated shell. The aggregation in organic solvents is based on supramolecular fluorous–fluorous interactions, which can be described by means of ¹⁹F NMR spectroscopy. In order to study the interaction and aggregation phenomena of dendrimers with perfluorinated shell and perfluoro‐tagged guest molecules we investigated [G3.5]‐dendrimer with a perfluorinated shell in the presence of perfluoro‐tagged disperse red. Noteworthy, the interaction intensities varied in an unexpected manner depending on the equivalents of perfluoro‐tagged guest molecules added to the dendrimers in solution which then formed supramolecular complexes based on fluorous–fluorous interactions. We found that these complexes aggregated around residual air in the solvent to form stable micron‐sized bubbles. Their sizes correlated with the interaction intensities measured for certain dendrimer–guest molecule ratios. Degassing of the solutions led to a quasi phase separation between organic and fluorous phase, whereby the dendrimers formed the fluorous phases. Regassing the sample with air afforded bubbles of the initial size again.     

Anodic film formation on binary Al?Mg and Al?Ti alloys in nitric acid

Nitric acid is commonly used for surface treatments of aluminium alloys. It is used to clean the surfaces after alkaline etching; it has application in chemical polishing and is also used for electrograining. The majority of these treatments undergo the application of anodic polarisation that results in formation of anodic oxide film. However, little is known about the behaviour of aluminium containing magnesium or titanium in solid solution under such conditions. To reveal the effects of magnesium and titanium alloying additions on anodic film formation in nitric acid, Al‐1800 ppm Mg and Al‐800 ppm Ti alloys were investigated. It was found that porous alumina film developed on the surfaces with reduced efficiency of 40%, due to the reactive nature of nitric acid to alumina. The presence of magnesium and titanium in aluminium had little influence on the efficiency of film growth, as confirmed by the relatively similar thicknesses of oxide formed on binary alloys and aluminium. However, incorporation of magnesium ions into the alumina film led to development of a high‐population density of localised voids near the alloy/film interface. An increased titanium content was found in the film regions close to the alloy/film interface, indicating its oxidation. Copyright © 2009 John Wiley & Sons, Ltd.     

Enrichment,incorporation and oxidation of copper during anodising of aluminium–copper alloys

Porous anodic oxides generated on copper‐containing aluminium alloys are less regular than anodic oxides generated on pure aluminium. Specifically, a porous oxide morphology comprising layers of embryo pores, generated by a cyclic process of oxide film growth and oxygen evolution, is generally observed. In this work, the relation between the oxidation behaviour of copper during anodising and the specific porous oxide film morphology was investigated by electrochemical techniques, transmission electron microscopy and Rutherford backscattering spectroscopy (RBS). It was found that the anodising potential determines the oxidation behaviour of copper, and the latter determines the porous oxide morphology. At low voltage, relatively straight pores with continuous cell walls were obtained on Al? Cu alloys, but selective oxidation of aluminium atoms resulted in the occlusion of copper‐containing metallic nanoparticles in the anodic film. At higher potentials, copper oxidation promoted oxygen evolution within the barrier layer, and generation of a less regular film morphology. RBS, performed on Al? Cu alloy specimens, revealed a high volume fraction of copper atoms in the anodic films generated at low potentials and a reduced amount of copper atoms in the anodic oxide films generated at high potentials. Copyright © 2009 John Wiley & Sons, Ltd.     

DFT study of polymorphism of the DNA double helix at the level of dinucleoside monophosphates

We apply DFT calculations to deoxydinucleoside monophosphates (dDMPs) which represent minimal fragments of the DNA chain to study the molecular basis of stability of the DNA duplex, the origin of its polymorphism and conformational heterogeneity. In this work, we continue our previous studies of dDMPs where we detected internal energy minima corresponding to the “classical” B conformation (BI‐form), which is the dominant form in the crystals of oligonucleotide duplexes. We obtained BI local energy minima for all existing base sequences of dDMPs. In the present study, we extend our analysis to other families of DNA conformations, successfully identifying A, BI, and BII energy minima for all dDMP sequences. These conformations demonstrate distinct differences in sugar ring puckering, but similar sequence‐dependent base arrangements. Internal energies of BI and BII conformers are close to each other for nearly all the base sequences. The dGpdG, dTpdG, and dCpdA dDMPs slightly favor the BII conformation, which agrees with these sequences being more frequently experimentally encountered in the BII form. We have found BII‐like structures of dDMPs for the base sequences both existing in crystals in BII conformation and those not yet encountered in crystals till now. On the other hand, we failed to obtain dDMP energy minima corresponding to the Z family of DNA conformations, thus giving us the ground to conclude that these conformations are stabilized in both crystals and solutions by external factors, presumably by interactions with various components of the media. Overall the accumulated computational data demonstrate that the A, BI, and BII families of DNA conformations originate from the corresponding local energy minimum conformations of dDMPs, thus determining structural stability of a single DNA strand during the processes of unwinding and rewinding of DNA. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2548–2559, 2010     

Separation and quantification of double‐ and triple‐layered rotavirus‐like particles by CZE

Virus‐like particles have been successfully used as safe vaccines, as their structure is identical to their native counterparts but devoid of the viral genetic material. However, production of these complex structures is not easy, as recombinant proteins must assemble into virus‐like particles. Techniques to differentiate assembled and soluble proteins, as well as assembly intermediaries often present in a sample, are required. An example of complex virus‐like particles mixture occurs when rotavirus proteins are recombinantly expressed. Rotavirus‐like particles (RLP) can be single (sl), double (dl), or triple layered (tl). The use of RLP preparations as vaccines requires their complete characterization, including separation and quantification of each RLP in a sample. In this work, CZE was evaluated for the separation and quantification of dl and triple‐layered rotavirus‐like particles (tlRLP). A fused‐silica capillary with a deoxycholate running buffer efficiently separated dl and tlRLP in RLP preparations, as they migrated in two discrete peaks with electrophoretic mobilities of 1.24±0.04 and 2.95±0.03 Ti, respectively. Standard curves for dl and tlRLP were generated, and the response was linearly proportional to analyte concentration. The methodology developed was quantitative, specific, accurate, precise, and reproducible. CZE allowed the quantitative characterization of RLP preparations, which is required for evaluation of immunogens, for process development, and for quality control protocols.     

Determination of synthetic pharmaceuticals in phytotherapeutics by capillary zone electrophoresis with contactless conductivity detection (CZE-CD)

In this work, a method for simultaneous determination of amfepramone, fenproporex, sibutramine and fluoxetine was developed by capillary zone electrophoresis with capacitively coupled contactless conductivity detection (C⁴D) using a homemade capillary electrophoretic system. The optimized conditions for the separation of the pharmaceuticals by CZE were as follows: 50 mmol L^− 1 phosphate buffer (pH 5.0) in 50/50 (v/v) mixture of water/acetonitrile as the working electrolyte, 15 kV separation voltage, 25 °C separation temperature, hydrodynamic injection by gravity using 20 cm injection height and 60 s injection time. The detection by C⁴D was carried out by using a homemade detector, which employs a sinusoidal wave generator operating at 600 kHz frequency and 2 V_pp wave amplitude. The optimized and validated CZE-C⁴D method was applied for the determination of the studied pharmaceuticals as adulterants in phytotherapeutic formulations commercialized in Brazil for slimming purposes.     

Formulating fluticasone propionate in novel PEG-containing nanostructured lipid carriers (PEG-NLC)

The aim of this study was to develop nanostructured lipid carriers (NLC) for topical delivery of fluticasone propionate (FP) with the aim to further improve the safety profile and decrease the adverse-side effects commonly reported in topical corticotherapy. NLC are colloidal drug-carriers consisting of a blend of a solid lipid and a small amount of liquid lipid since these carriers have proved to be effective in epidermal targeting in particular of glucocorticoids. NLC consisting of glyceryl palmito-stearate, and PEG-containing medium chain triglycerides mixture, stabilised by polysorbate 80 and soybean phosphatidylcholine were prepared. A mean particle size between 380 and 408 nm and entrapment efficacy of 95% were obtained for FP-loaded NLC. The crystallinity and polymorphic phase behaviour of FP-free and FP-loaded NLC were examined by differential scanning calorimetry and wide angle X-ray diffraction. Results revealed a low-crystalline structure and confirmed the incorporation of FP into the particles. The suitability of PEG-containing liquid lipids to form the lipid matrix of NLC was also confirmed.