组合化学法筛选聚苯乙烯固载季铵盐相转移催化剂研究(I)

利用组合化学方法合成了一个含有60种不同结构的聚苯乙烯固载季铵盐相转移催化剂的催化剂库,以有外加碱条件下亲核取代反应为探针反应,利用迭代法从中筛选出了活性最高的催化剂,建立了一种快速合成和筛选聚苯乙烯固载季铵盐相转移催化剂的方法。     

HPLC Determination of Amino Acids by Pre-Column Fluorescence Derivatization with Carbazole-9-yl-Acetyl Chloride

Atpresentseparationsandquantitativedeterminationsofaminoacidsbymeansofnewfluorescencereagentsforpre-columnorpost-columnderivatizationinRP-HPLCarestillanactivefiled,developmentshavingbeensummarizedbySnyder'.MostaminoacidsdonotshowUVabsorptionin220-254urn,henceinordertoincreasedetectionsensitivityandimproveselectivity,generallyderivatizationreagentsareemployed.Phenylisothiocyanate(PITC)',OPAand3,5-dinitrobenzoylchloride3arewellknownderivatizationreagefltsforthedeterminationofaminocompounds…     

酚醛型吸附树脂对茶碱的吸附性能研究

研究了酚醛型吸附树脂对茶碱的静态和动态吸附。结果表明3种树脂对茶碱的吸附量均达117－204mg/g，明显优于DuoliteS-761;酚醛型吸附树脂等温吸附茶碱的平衡吸附数据符合Langmuir方程，相关系数在0．99以上，因此，酚醛型吸附树脂吸附茶碱属单分子层吸附；用1mol/LHCl和W甲醇为80％复合溶液作为吸附树脂的洗脱剂，效果很好。     

γ-Al2O3固相微萃取涂层的制备及其在水体和气态基质中的应用

采用物理涂渍的方法制备了γ Al2 O3 固相微萃取涂层。通过γ Al2 O3 固相微萃取 (SPME) 气相色谱 (GC)联用技术 ,对水中痕量苯系物苯、甲苯、乙苯、二甲苯异构体 (BTEXs)进行萃取分析 ,结果表明该涂层具有热稳定性强 (最高使用温度可达 35 0℃ )、灵敏度高 (检测限为 1～ 10 μg/L)以及制备重复性好 (相对标准偏差为 8 3% )的特点 ;同时该涂层对气态基质中的污染物亦可进行萃取分析。     

N,N-二乙基丙烯酰胺与丙烯酸在聚丙烯薄膜表面光接枝制备二元接枝膜及其温度、pH值敏感特性研究

以二苯甲酮为引发剂,聚丙烯薄膜(CPP)为基材,通过紫外光接枝的方法制备了具有温度和pH值双重敏感特性的聚N,N-二乙基丙烯酰胺(PNDEA)与聚丙烯酸(PAA)二元接枝膜.在PNDEA一次接枝膜的制备过程中,引发剂与单体配比相同时,本体接枝方法的接枝速率在反应初期明显高于溶液接枝方法;采用溶液法时,增大引发剂与单体配比等可提高接枝率.用本体法所制得的PNDEA一次膜光活化接枝PAA时接枝速率较溶液法高,并且能够实现较高的PAA接枝率.用红外光谱(FTIR)、X射线光电子能谱化学分析(ESCA)对接枝层组成的表征结果证实了二元接枝层的存在.在不同温度下,PNDEA一次接枝膜的FTIR谱图中酰胺Ⅰ带特征吸收峰发生位移表明它具有温度敏感特性.用扫描电子显微镜(SEM)对PNDEA接枝层表征结果表明,用不同接枝手段所制备的接枝膜具有不同的表面形貌.通过吸水率测定研究了二元接枝膜的温度及pH值敏感特性.     

氢化物发生原子荧光法测定水处理剂聚合氯化铝中砷的含量

探讨了以硫酸预处理样品,硫脲-抗坏血酸混合液将As(Ⅴ)预先还原至As(Ⅲ),氢化物发生原子荧光法测定聚合氯化铝中砷含量的方法。结果表明,回收率为92.31%~105.10%,相对标准偏差为2.37%~5.55%。     

RHEOLOGICAL BEHAVIOR OF KAOLIN TOUGHENED POLYPROPYLENE COMPOSITES

The relation between the rheological behavior and various interfacial properties ofKaolin rigid particle toughened polypropylene (PP / Kaolin) composites were studied bymeans of parallel-plate rheometer, melt flow rate apparatus, scanning electron microscopy(SEM) and other testing methods. The results show that addition of interfacial modffier toPP/Kaolin composites is advantageous to homogeneous dispersion of filler in PP matrix,formation of flexible interlayer between Kaolin particles and PP matrix and Amprovementof the melt processibility of the composites.     

INTERFACIAL MOLECULAR DESIGN OF A RIGID- PARTICLE TOUGHENED POLYAMIDE 6 COMPOSITE

The effects of interfacial modifier on the mechanical properties of kaolin-filled polyamide 6 (PA6) have been studied. The interracial interaction between polyamide 6 and kaolin has been character ized by means of infrared spectroscopy (IR) and scanning electron microscopy (SEM). The results show that the role of the interracial modifier lies in forming an elastic interlayer with good adhesion between kaolin and PA 6. A composite with high impact strength, high tensile strength and high elastic modulus can be obtained by inserting the elastic interfacial modifier into the rigid-particle-filled polymer system.     

Synthesis and Spectroscopic Properties of Cyclotriphosphazenes Containing 6-（4-Hydroxyphenyl）-2,2′-bipyridine Side Groups

Two novel cyclotriphosphazene derivatives containing 6- （4-hydroxyphenyl）-2,2′-bipyridine （hopbp） side groups, N3 P3 （dobp） 2 （hopbp） 2 （ 1 ） and N3 P3 （dobp） （hopbp） 4 （2） （ dobp = 2,2′-dioxybiphenyl）, were synthesized and characterized. These compounds display strong fluorescent emission both in solution and in solid state. Their absorption and emission spectra are sensitive to proton： the addition of HBF4 to the methanol and dichloromethane solution（9： 1, volume ratio） of compound 1 led to a red-shift from 350 to 460 nm for the emission spectrum, and the process was also characterized by isosbestic points of absorption spectra at 267, 287 and 313 nm.     

围长为3的点可迁图的3限制边连通度

设G是阶至少为6的k正则连通图.如果G的围长等于3,那么它的3限制边连通度 λ3(G)≤3k-6.当G是3或者4正则连通点可迁图时等号成立,除非G是4正则图并且 λ3(G)=4.进一步,λ3(G)=4的充分必要条件是图G含有子图K4.