Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

Applying Text Analytics for Studying Research Trends in Dependability

The dependability of systems and networks has been the target of research for many years now. In the 1970s, what is now known as the top conference on dependability—The IEEE/IFIP International Conference on Dependable Systems and Networks (DSN)—emerged gathering international researchers and sparking the interest of the scientific community. Although it started in niche systems, nowadays dependability is viewed as highly important in most computer systems. The goal of this work is to analyze the research published in the proceedings of well-established dependability conferences (i.e., DSN, International Symposium on Software Reliability Engineering (ISSRE), International Symposium on Reliable Distributed Systems (SRDS), European Dependable Computing Conference (EDCC), Latin-American Symposium on Dependable Computing (LADC), Pacific Rim International Symposium on Dependable Computing (PRDC)), while using Natural Language Processing (NLP) and namely the Latent Dirichlet Allocation (LDA) algorithm to identify active, collapsing, ephemeral, and new lines of research in the dependability field. Results show a strong emphasis on terms, like ‘security’, despite the general focus of the conferences in dependability and new trends that are related with ’machine learning’ and ‘blockchain’. We used the PRDC conference as a use case, which showed similarity with the overall set of conferences, although we also found specific terms, like ‘cyber-physical’, being popular at PRDC and not in the overall dataset.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

Seasonal Variability of a Caryophyllane Chemotype Essential Oil of Eugenia patrisii Vahl Occurring in the Brazilian Amazon

Eugenia patrisii Vahl is a native and non-endemic myrtaceous species of the Brazilian Amazon. Due to few botanical and phytochemical reports of this species, the objective of the present work was to evaluate the seasonal variability of their leaf essential oils, performed by GC and GC-MS and chemometric analysis. The results indicated that the variation in oil yields (0.7 ± 0.1%) could be correlated with climatic conditions and rainy (R) and dry seasons (D). (E)-caryophyllene (R = 17.1% ± 16.0, D = 20.2% ± 17.7) and caryophyllene oxide (R = 30.1% ± 18.4, D = 14.1% ± 19.3) are the major constituents and did not display significant differences between the two seasons. However, statistically, a potential correlation between the main constituents of E. patrisii essential oil and the climatic parameters is possible. It was observed that the higher temperature and insolation rates and the lower humidity rate, which are characteristics of the dry season, lead to an increase in the (E)-caryophyllene contents, while lower temperature and insolation and higher humidity, which occur in the rainy season, lead to an increase in the caryophyllene oxide content. The knowledge of variations in the E. patrisii essential oil composition could help choose the best plant chemical profile for medicinal purposes.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Condensation and Crystal Nucleation in a Lattice Gas with a Realistic Phase Diagram

We reconsider model II of Orban et al. (J. Chem. Phys. 1968, 49, 1778–1783), a two-dimensional lattice-gas system featuring a crystalline phase and two distinct fluid phases (liquid and vapor). In this system, a particle prevents other particles from occupying sites up to third neighbors on the square lattice, while attracting (with decreasing strength) particles sitting at fourth- or fifth-neighbor sites. To make the model more realistic, we assume a finite repulsion at third-neighbor distance, with the result that a second crystalline phase appears at higher pressures. However, the similarity with real-world substances is only partial: Upon closer inspection, the alleged liquid–vapor transition turns out to be a continuous (albeit sharp) crossover, even near the putative triple point. Closer to the standard picture is instead the freezing transition, as we show by computing the free-energy barrier relative to crystal nucleation from the “liquid”.     

Evolution of first-order sidebands from multiple FWM processes in HiBi optical fibers

The generation of two idler waves inside a high birefringent (HiBi) optical fiber through three four-wave mixing (FWM) processes is studied theoretically. The coupled-equations for the field amplitudes are derived and analytically solved, in the co-polarized and orthogonal polarization schemes. The obtained solutions take into account the delayed Raman response of the medium. The polarization sensitivity of the generation of the idler waves is analyzed. Results show that the stimulated Raman scattering does not change the efficiency of the idler wave generation in the co-polarized scheme, whereas in the orthogonal polarization scheme that nonlinear process decreases the efficiency of the four-wave mixing processes. Results also show that this set of multiple four-wave mixing processes is physically quite different from the typical single or dual pump four-wave mixing configurations. Findings show that the power transfer from the pumps to the idler fields can lead to a monotonous growth, or a periodic evolution of the sidebands along the fiber. Results show that the process efficiency varies greatly with the angle between the two pump polarizations.     

Vortices and Jacobian varieties

We investigate the geometry of the moduli space of N$N$ vortices on line bundles over a closed Riemann surface Σ$\Sigma$ of genus g>1$g>1$, in the little explored situation where 1≤N<g$1\le N<g$. In the regime where the area of the surface is just large enough to accommodate N$N$ vortices (which we call the dissolving limit), we describe the relation between the geometry of the moduli space and the complex geometry of the Jacobian variety of Σ$\Sigma$. For N=1$N=1$, we show that the metric on the moduli space converges to a natural Bergman metric on Σ$\Sigma$. When N>1$N>1$, the vortex metric typically degenerates as the dissolving limit is approached, the degeneration occurring precisely on the critical locus of the Abel–Jacobi map of Σ$\Sigma$ at degree N$N$. We describe consequences of this phenomenon from the point of view of multivortex dynamics.     

Effect of contact angle on the morphology of nanostructures produced by solution wetting of anodized aluminum oxide templates

Template-assisted nanofabrication is a simple and effective method to produce various nanostructure morphologies by controlling the polymer, solvent, and template characteristics. In this study, the importance of the surface interactions between the solution and the template in controlling the morphology of the nanostructures has been highlighted. Contact angles between various polymer solutions and anodized aluminum oxide (AAO) templates have been determined. The morphology of the resultant nanostructures has been correlated with the measured contact angles between solution and template. It is generally observed that nanorods (diameter of 100–350 nm) are produced at low contact angles, whereas nanotubes (diameter of 200–400 nm) tend to form at high contact angles. Therefore, desired nanostructure morphology for a given application can be obtained by controlling the initial wetting interaction between solution and template.     

Likelihood analysis of the minimal AMSB model

We perform a likelihood analysis of the minimal anomaly-mediated supersymmetry-breaking (mAMSB) model using constraints from cosmology and accelerator experiments. We find that either a wino-like or a Higgsino-like neutralino LSP, \(\tilde{\chi }^0_{1}\), may provide the cold dark matter (DM), both with similar likelihoods. The upper limit on the DM density from Planck and other experiments enforces \(m_{\tilde{\chi }^0_{1}} \lesssim 3 \,\, \mathrm {TeV}\) after the inclusion of Sommerfeld enhancement in its annihilations. If most of the cold DM density is provided by the \(\tilde{\chi }^0_{1}\), the measured value of the Higgs mass favours a limited range of \(\tan \beta \sim 5\) (and also for \(\tan \beta \sim 45\) if \(\mu > 0\)) but the scalar mass \(m_0\) is poorly constrained. In the wino-LSP case, \(m_{3/2}\) is constrained to about \(900\,\, \mathrm {TeV}\) and \(m_{\tilde{\chi }^0_{1}}\) to \(2.9\pm 0.1\,\, \mathrm {TeV}\), whereas in the Higgsino-LSP case \(m_{3/2}\) has just a lower limit \(\gtrsim 650\,\, \mathrm {TeV}\) (\(\gtrsim 480\,\, \mathrm {TeV}\)) and \(m_{\tilde{\chi }^0_{1}}\) is constrained to \(1.12 ~(1.13) \pm 0.02\,\, \mathrm {TeV}\) in the \(\mu >0\) (\(\mu <0\)) scenario. In neither case can the anomalous magnetic moment of the muon, \((g-2)_\mu \), be improved significantly relative to its Standard Model (SM) value, nor do flavour measurements constrain the model significantly, and there are poor prospects for discovering supersymmetric particles at the LHC, though there are some prospects for direct DM detection. On the other hand, if the \(\tilde{\chi }^0_{1}\) contributes only a fraction of the cold DM density, future LHC Open image in new window -based searches for gluinos, squarks and heavier chargino and neutralino states as well as disappearing track searches in the wino-like LSP region will be relevant, and interference effects enable \(\mathrm{BR}(B_{s, d} \rightarrow \mu ^+\mu ^-)\) to agree with the data better than in the SM in the case of wino-like DM with \(\mu > 0\).