Isobaric metabolite interferences and the requirement for close examination of raw data in addition to stringent chromatographic separations in liquid chromatography/tandem mass spectrometric analysis of drugs in biological matrix

In addition to matrix effects, common interferences observed in liquid chromatography/tandem mass spectrometry (LC/MS/MS) analyses can be caused by the response of drug-related metabolites to the multiple reaction monitoring (MRM) channel of a given drug, as a result of in-source reactions or decomposition of either phase I or II metabolites. However, it has been largely ignored that, for some drugs, metabolism can lead to the formation of isobaric or isomeric metabolites that exhibit the same MRM transitions as parent drugs. The present study describes two examples demonstrating that interference caused by isobaric or isomeric metabolites is a practical issue in analyzing biological samples by LC/MS/MS. In the first case, two sequential metabolic reactions, demethylation followed by oxidation of a primary alcohol moiety to a carboxylic acid, produced an isobaric metabolite that exhibits a MRM transition identical to the parent drug. Because the drug compound was rapidly metabolized in rats and completely disappeared in plasma samples, the isobaric metabolite appeared as a single peak in the total ion current (TIC) trace and could easily be quantified as the drug since it was eluted at a retention time very close to that of the drug in a 12-min LC run. In the second example, metabolism via the ring-opening of a substituted isoxazole moiety led to the formation of an isomeric product that showed an almost identical collision-induced dissociation (CID) MS spectrum as the original drug. Because two components were co-eluted, the isomeric product could be mistakenly quantified and reported by data processing software as the parent drug if the TIC trace was not carefully inspected. Nowadays, all LC/MS data are processed by computer software in a highly automated fashion, and some analysts may spend much less time to visually examine raw TIC traces than they used to do. Two examples described in this article remind us that quality data require both adequate chromatographic separations and close examination of raw data in LC/MS/MS analyses of drugs in biological matrix.     

Click approaches in sol–gel chemistry

The combination of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction with sol–gel processing enables the versatile preparation of sol–gel materials under different shapes with targeted functionalities through a diversity-oriented approach. In this account, the development of the CuAAC reaction under anhydrous conditions for the synthesis of sol–gel precursors and for the assembling of magnetic nanoparticles on self-assembled monolayers is related, as well as the use of the classical CuAAC methodologies for the functionalization of mesoporous silica nanoparticles and microdots arrays. Coupling CuAAC and Sol–Gel will result in simplified preparations of multifunctional materials with controlled morphologies.     

SYNTHESIS AND REACTVITY OF N-[N-PHOSPHORAMIDO-1H-BENZIMIDAZOL-2-YL] IMIDATES

N-(-1H-Benzimidazol-2-yl) imidates 1a–c react with chlorophosphoramide to give the N-[-1-N,N,N′,N′-tetramethylphosphoramidoyl-1H-benzimidazol-2-yl]-imidates 2a–c or with dichlorophosphoramide to yield the bis[(N-1-benzimidazol-2-yl)-imidate] phosphoramide derivatives 3a–b. The reaction of compounds 2a–c toward primary amines is studied. The obtained amidine derivatives 4a–b were unambiguously characterized by different spectroscopic techniques (IR, ¹H, ¹³C, and ³¹P NMR, and in some cases MS).     

Synthesis and characterization of polyesters derived from sebacic acid,hexanediol, and hydroquinone

Oils and fats derived from animals and plants provide a good renewable source for polymer precursors. In this investigation, fatty acids derived from plant oils and diols were used as monomers to produce polyesters by melt polycondensation. Sebacic acid, hexanediol, and hydroquinone were used as precursors in the polymer synthesis. The polymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, three-bending point flexural test, X-ray diffraction, tensile testing, and contact angle. The resulting polyesters were blended with epoxies to create materials with an increased elongation at break without affecting other mechanical properties.     

Unprecedented base effect on the synthesis of chiral phosphinate esters: A new route to P-chiral phosphine oxides of high enantiomeric purity

The stereochemical outcome of the reaction of chiral secondary alcohols with a phosphinyl chloride was found to be highly dependent on the achiral base used. Thus, the reaction of the readily available sugar derived carbinols, 1 and 2, with methylphenylphosphinyl chloride in the presence of triethylamine yields stereoselectively the corresponding Snp-phosphinates 3Sp and 5Sp in 94 and 92% diastereomeric excess (de). Simply changing the base from triethylamine to pyridine affords Rp-phosphinates 4Rp and 6Rp epimers to 3Sp and 5Sp at the phosphinyl phosphorus in 50 and 40% de respectively. These phosphinate esters were found to be good P-chiral transferring intermediates, they react with Grignard reagents under very mild conditions to give the corresponding phosphine oxides. Both enantiomers Sp- and Rp-o-anisylmethylphenylphosphine oxide (PAMPO) as well Sp- and Rp- methylphenylpropyl phosphine oxide were obained enantiomerically pure in high yields     

Averaging and periodic solutions in the plane and parametrically excited pendulum

We first approximate the solutions of the nonautonomous oscillating suspension point pendulum equation by the solutions of a second order autonomous differential equation. Using the strict monotonicity of the periodic solutions of the approximating equation, we prove the existence of a large number of subharmonic periodic solutions of the plane pendulum when its point of suspension is excited parametrically.     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

A Comprehensive Study of N-Butyl-1H-Benzimidazole

Imidazole derivatives have found wide application in organic and medicinal chemistry. In particular, benzimidazoles have proven biological activity as antiviral, antimicrobial, and antitumor agents. In this work, we experimentally and theoretically investigated N-Butyl-1H-benzimidazole. It has been shown that the presence of a butyl substituent in the N position does not significantly affect the conjugation and structural organization of benzimidazole. The optimized molecular parameters were performed by the DFT/B3LYP method with 6-311++G(d,p) basis set. This level of theory shows excellent concurrence with the experimental data. The non-covalent interactions that existed within our compound N-Butyl-1H-benzimidazole were also analyzed by the AIM, RDG, ELF, and LOL topological methods. The color shades of the ELF and LOL maps confirm the presence of bonding and non-bonding electrons in N-Butyl-1H-benzimidazole. From DFT calculations, various methods such as molecular electrostatic potential (MEP), Fukui functions, Mulliken atomic charges, and frontier molecular orbital (HOMO-LUMO) were characterized. Furthermore, UV-Vis absorption and natural bond orbital (NBO) analysis were calculated. It is shown that the experimental and theoretical spectra of N-Butyl-1H-benzimidazole have a peak at 248 nm; in addition, the experimental spectrum has a peak near 295 nm. The NBO method shows that the delocalization of the aσ-electron from σ (C1–C2) is distributed into antibonding σ* (C1–C6), σ* (C1–N26), and σ* (C6–H11), which leads to stabilization energies of 4.63, 0.86, and 2.42 KJ/mol, respectively. Spectroscopic investigations of N-Butyl-1H-benzimidazole were carried out experimentally and theoretically to find FTIR vibrational spectra.     

Effect of Microwave Plasma Pre-Treatment on Cotton Cellulose Dissolution

The utilization of cellulose to its full potential is constrained by its recalcitrance to dissolution resulting from the rigidity of polymeric chains, high crystallinity, high molecular weight, and extensive intra- and intermolecular hydrogen bonding network. Therefore, pretreatment of cellulose is usually considered as a step that can help facilitate its dissolution. We investigated the use of microwave oxygen plasma as a pre-treatment strategy to enhance the dissolution of cotton fibers in aqueous NaOH/Urea solution, which is considered to be a greener solvent system compared to others. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, and Powder X-ray Diffraction analyses revealed that plasma pretreatment of cotton cellulose leads to physicochemical changes of cotton fibers. Pretreatment of cotton cellulose with oxygen plasma for 20 and 40 min resulted in the reduction of the molecular weight of cellulose by 36% and 60% and crystallinity by 16% and 25%, respectively. This reduction in molecular weight and crystallinity led to a 34% and 68% increase in the dissolution of 1% (w/v) cotton cellulose in NaOH/Urea solvent system. Thus, treating cotton cellulose with microwave oxygen plasma alters its physicochemical properties and enhanced its dissolution.