A Novel Production of γ-Butyrolactone Catalyzed by Homogeneous Ruthenium Complexes

γ-Butyrolactone (hereafter abbreviated GBL) is produced by the two-stage hydrogenation of maleic anhydride(MAH) in the liquid phase: the hydrogenation of MAH to succinic anhydride(SAH) in the first stage and the subsequent hydrogenation of SAH to GBL in the second stage. A novel ruthenium catalyst system consisting of Ru salts, trialkylphosphine and p-toluene sulfonic acid (p-TsOH) was found very effective for the hydrogenation of SAH affording GBL, which exhibited excellent catalyst performance, exceeding 97% selectivity for GBL and high activity.     

Chemically enhanced alpha-energy spectroscopy in liquids

Summary The determination of transuranic (TRU) content in nuclear wastes, reactor materials, process solutions, and various other matrices is required in support of material assessment, environmental restoration, and waste processing activities. We have found that direct measurement of TRU is possible using surface passivated ion implanted planar silicon diode detectors. The performance and durability of modern silicon diodes enables direct detection of alpha-particles, with retention of some spectral information, through small air gaps or under direct contact with liquid or solid samples. We will present results on the performance of silicon diode detectors for the determination of TRU in liquids.     

Chromatographic molecular recognition for catechol-related compounds using thiacalix[4]arene as an effective selector

Thiacalix[4]arene (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrahydroxy-2,8,14,20-tetrathiacalix[4]arene) is an amphiphilic molecule comprising four p-tert-butylphenol-like groups ortho-linked by single sulfur atoms. This molecule has a high electron density area owing to the close proximity of the hydroxyl groups and sulfur atoms. We studied the applicability of this interesting compound as a selector for high-performance liquid chromatography (HPLC) thereby presumably exploiting this feature. Firstly, uniformly sized polymer particles were prepared by using a multi-step swelling and polymerization method with ethylene glycol dimethacrylate (EDMA) as a cross-linker. Methacrylic acid (MAA) was introduced onto the surface of the resulting polymer particles through a new modification method. Thiacalix[4]arene was chemically bonded through the MAA group by using 1,4-dibromobutane as a spacer to reduce steric hindrance around the MAA and the polymer particle itself. The performance of the prepared polymer-based thiacalix[4]arene-modified stationary phase was evaluated with HPLC. Specific chromatographic retention behavior was observed for catechol relative to positional isomers of xylene, cresol, and benzene-diol. Catecholamine and catechol showed specific chromatographic retention behavior.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

FLUORESCENCE LIFETIME OF ACRIDINE ORANGE IN SODIUM DODECYL SULFATE PREMICELLAR SOLUTIONS

Abstract— The absorption and fluorescence spectra, and the fluorescence lifetime of acridine orange (AO) were measured in a wide range of the sodium dodecyl sulfate (SDS) concentration below and above the critical micelle concentration (cmc). The fluorescence consisted of two components with different lifetimes; short (<3 ns) and long (>3 ns). The short and long lifetime components are attributed to the AO monomer and dimer associated with detergent, respectively. The lifetime of the dimer increased with increasing the SDS concentration just below the cmc. It decreased suddenly to a constant value just above the cmc. The lifetime of the monomer showed only a slight increase in the concentration range of SDS employed.     

Electron-transfer polymers. XXXIV. Redox polyurethanes from p-benzoquinone-2,5-diols and diisocyanates

It is possible to prepare polyurethanes from p-benzoquinone-diols and diisocyanates by using dibutyltin diacetate catalyst at room temperature or below, since the benzoquinone group does not react with isocyanate under these conditions. This permits preparation of new redox polymers. In preparing the polyurethanes excess isocyanate groups must be destroyed at the end of the reaction time in order to prevent crosslinking during work-up. These polymers are readily reduced by aqueous hydrosulfite. Good viscosity numbers are obtained; and, in general, upon reduction the viscosity increases over that of the oxidized form. There is no evidence of crosslinking. When oxidized and reduced forms of these polymers are mixed there is no evidence of charge transfer.     

Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Stereoselective synthesis of 1,4-disubstituted 1,3-diene

New synthetic methods for the preparation of 1,3-dienes are described.     

Determination of chemical form of antimony in contaminated soil around a smelter using X-ray absorption fine structure.

Only limited information is available about the behavior of antimony (Sb) in contaminated soils. However, understanding the behavior of Sb in contaminated soils is important, because the toxicity or solubility of this element depends on its chemical state. In this study, we investigated the levels of Sb and the chemical forms of Sb in the soil around a smelter using X-ray absorption fine structure (XAFS) spectra. The highest Sb concentration in the contaminated soil was 2900 mg/kg dry soil. According to Sb-K edge X-ray absorption near edge (XANE) spectra, the Sb in the soil was in the form of Sb(V) compounds. The similarity of extended XAFS (EXAFS) spectra suggests that Sb speciation was independent of the sampling site, which indicates that Sb or Sb2O3 emitted from the smelter was converted into Sb(V) compounds in the soil.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.