Enhancement of the catalytic activity of [Cu2(TS)(OH)2(OAc)] using superconductor cuprate sample

A superconducting sample (Nd_0.1Y_0.9Ba₂Cu₃O_7-δ) has been tried as a catalyst for H₂O₂ decomposition. All parameters affecting the reaction rate (concentration of H₂O₂, weight of catalyst, temperature and pH) were studied and the optimum conditions were evaluated. A mixture of the superconducting cuprate with [Cu₂(TS)(OH)(OAc)] using different percentages of the sample has been prepared and tried kinetically under the same mentioned conditions. An attempt was made to increase the activity of the complex. The data show that the cuprate sample alone was found to be almost inactive when compared with that of the mixture. The catalytic mechanism in the absence and presence of the complex was suggested.     

Effects of hydrophobic chain length on the characteristics of the micelles of octaoxyethylene tetradecyl C(14)E(8), hexadecyl C(16)E(8), and octadecyl C(18)E(8) ethers

Size, shape, and flexibility of micelles of octaoxyethylene tetradecyl C(14)E(8), hexadecyl C(16)E(8), and octadecyl C(18)E(8) ethers in dilute aqueous solutions were determined at finite surfactant concentrations c by static light scattering (SLS) and dynamic light scattering experiments at several temperatures T below the critical points. The SLS results were successfully analyzed with the aid of the thermodynamic theory formulated with wormlike spherocylinder model for SLS of micelle solutions. The analysis yielded the molar mass M(w) of the micelles as a function of c and the cross-sectional diameter d. The hydrodynamic radius R(H) and the radius of gyration S(2)(1/2) of the micelles as functions of M(w) were found to be also well-described by the corresponding theories for the wormlike spherocylinder or wormlike chain models. The results of the stiffness parameter lambda(-1) have revealed that the micelles are far from rigid rods but rather stiff compared with typical flexible polymers and they grow in size with increasing T to greater length for longer hydrophobic chains, i.e., alkyl groups of the surfactants. As the alkyl group becomes longer, the d value increased, while the spacings s between adjacent hexaoxyethylene chains on the micellar surface were found to remain substantially constant.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Analysis of scintigrams using fuzzy theory

Textural features for phantom images were extracted. Texture parameters which represent RI distribution--skew, energy, entropy and angular second moment were used. But, it was difficult to analyse the images using discriminant analysis for textural features, because textural features had statistical noise. Therefore fuzzy reasoning was adapted to analyse the images. Textural features for six kinds of images were showed using membership function. The possibility to the image was evaluated using the value of membership function on each images. Fuzzy reasoning could be done easily using max-min composition formula. The reasoning was found more suitable to analyse the images than discriminant analysis and will be considered useful for analysis of clinical scintigrams.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

Studies on reactions of the N-phosphonium salts of pyridines. XIV. Wholly aromatic polyamides by the direct polycondensation reaction by using phosphites in the presence of metal salts

Poly-p-benzamide of high molecular weight (η_inh = ～ in H₂SO₄) was obtained by the direct polycondensation reaction of p-aminobenzoic acid (p-ABA) by means of diphenyl and triaryl phosphites in N-methylpyrrolidone (NMP)-pyridine solution containing lithium and calcium chlorides. Molecular weight of polymer varied with the amount of these salts, showing maximum values at the concentration of about 4 wt-% of LiCl or about 8 wt-% of CaCl₂ in the reaction mixture. The reaction temperature at around 80°C gave a polymer of the highest viscosity. The polycondensation reaction was also affected by monomer concentration, solvents, and tertiary amines like pyridine. Similarly, aromatic polyamides with high molecular weight (η_inh values up to 1.34 in H₂SO₄) were prepared from isophthalic acid and aromatic diamines, whereas terephthalic acid gave only low-viscosity polymers.     

Inter- and intramolecular activation of aromatic C-H bonds by diphosphine and hydrido-bridged dinuclear iridium complexes

Reactions of [(Cp*Ir)2(mu-dmpm)(mu-H)2]2+ (1) with NaOtBu in aromatic solvent at room temperature give [(Cp*Ir)(H)(mu-dmpm)(mu-H)(Cp*Ir)(Ar)]+ [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furanyl (5a), 3-furanyl (5b)] via intermolecular aromatic C-H activation. Treatment of [(Cp*Ir)2(mu-dppm)(mu-H)2]2+ (2) with base (Et2NH) results in intramolecular C-H activation of the phenyl group in the dppm ligand to give [(Cp*Ir)(H){mu-PPh(C6H4)CH2PPh2}(mu-H)(Cp*Ir)]+ (6). The structures of 3, 5a, and 6 have been determined by X-ray diffraction methods.