Toward a new generation of therapeutics

Scientific evidence in the prevention and treatment of various disorders is accumulating regarding probiotics. The health benefits supported by adequate clinical data include increased resistance to infectious disease, decreased duration of diarrhea, management of inflammatory bowel disease, reduction of serum cholesterol, prevention of allergy, modulation of cytokine gene expression, and suppression of carcinogen production. Recent ventures in metabolic engineering and heterologous protein expression have enhanced the enzymatic and immunomodulatory effects of probiotics and, with time, may allow more active intervention among critical care patients. In addition, a number of approaches are currently being explored, including the physical and chemical protection of cells, to increase probiotic viability and its health benefits. Traditional immobilization of probiotics in gel matrices, most notably calcium alginate and κ-carrageenan, has frequently been employed, with noted improvements in viability during freezing and storage. Conflicting reports exist, however, on the protection offered by immobilization from harsh physiologic environments. An alternative approach, microencapsulation in “artificial cells,” builds on immobilization technologies by combining enhanced mechanical stability of the capsule membrane with improved mass transport, increased cell loading, and greater control of parameters. This review summarizes the current clinical status of probiotics, examines the promises and challenges of current immobilization technologies, and presents the concept of artificial cells for effective delivery of therapeutic bacterial cells.     

Use of kinetic plots for relative assessment of reactor throughput and energy consumption

The progress of high temperature processes is generally described in terms of variation of the degree of conversion () with time (t). The present paper outlines a procedure for making use of-t plots for comparative assessment of productivity and energy requirements for a test system with respect to a reference, on the basis of some simplifying assumptions. It is assumed that the throughput is inversely proportional to reaction time as in the case of batch reactors and plug flow reactors. It is also assumed that the energy requirement is a simple function of process temperature. The principles outlined is illustrated with reference to some laboratory data for reduction of iron oxide by coal.The authors wish to thank Prof. P. R. Rao, Director National Metallurgical Laboratory, Jamshedpur, India, for providing facilities for experimental work and for according permission to publish this work.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

A polypyrrole/polymethylene pattern on gold using a micro-contact printing technique

A micro-contact printing technique was used to fabricate a polypyrrole/polymethylene pattern on a gold surface. ω-(N-Pyrroyl)undecanethiol (PyC₁₁SH) acts as ink for the generation of a pyrrole-terminal monolayer patterned on gold. This monolayer-patterned surface functions as a resist for the selective growth of polymethylene by catalytic decomposition of diazomethane on the gold surface. It also functions as a monomer for the electrochemical polymerization of pyrrole on the PyC₁₁SH monolayer-patterned surface. The polypyrrole/polymethylene pattern was fabricated by an electrochemical polymerization method. The polypyrrole was grown on the pyrrole-patterned surface by potential scanning between 0.0 and 1.2 V vs. Ag wire. The thickness of the polypyrrole growth increases with the increasing number of cycles. The structural features of the patterned surface can be determined by scanning electron microscopy and atomic force microscopy. Electronic Publication     

HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Phenomenological renormalization of free nucleon-nucleon interaction

Low-lying spectra of⁶Li,¹⁸F,¹⁸O,⁴²Sc,⁴²Ca,⁵⁸Ni and⁹²Zr are studied with Sussex matrix elements (SME) and their central, spin-orbit and tensor components. It is observed that major contribution to level energies comes from the central part, while the tensor part provides the finer details of spectra, particularly forT=0 levels. The spin-orbit part does not make any appreciable contribution to level energies. A phenomenological renormalization of the SME is carried out to improve the agreement with the experimental results. It turns out that some of the low-lyingT=0 levels can be satisfactorily described if the SME in the³S₁ relative state are made (1+α) times their bare interaction value, whereα is a constant to be determined from a comparison with experimental level energies. Similarly, forT=1 levels, better agreement with the experimental results is obtained if aδ-function-plus-quadrupole interaction is added to the SME.     

Purification and Characterization of Gum-Derived Polysaccharides of Moringa oleifera and Azadirachta indica and Their Applications as Plant Stimulants and Bio-Pesticidal Agents

Plant gums are bio-organic substances that are derived from the barks of trees. They are biodegradable and non-adverse complex polysaccharides that have been gaining usage in recent years due to a number of advantages they contribute to various applications. In this study, gum was collected from Moringa oleifera and Azadirachta indica trees, then dried and powdered. Characterizations of gum polysaccharides were performed using TLC, GC-MS, NMR, etc., and sugar molecules such as glucose and xylose were found to be present. Effects of the gums on Abelmoschus esculentus growth were observed through root growth, shoot growth, and biomass content. The exposure of the seeds to the plant gums led to bio stimulation in the growth of the plants. Poor quality soil was exposed to the gum polysaccharide, where the polysaccharide was found to improve soil quality, which was observed through soil analysis and SEM analysis of soil porosity and structure. Furthermore, the plant gums were also found to have bio-pesticidal activity against mealybugs, which showed certain interstitial damage evident through histopathological analysis.     

Recent study of nanomaterials prepared by inert gas condensation using ultra high vacuum chamber

The ultra high vacuum chamber was developed in the Department of Nuclear Physics, University of Madras with the funding from DST, India. This UHV chamber is used to prepare nanocrystalline materials by inert gas condensation technique (IGCT). Nanocrystalline materials such as PbF₂, Mn²⁺-doped PbF₂, Sn-doped In₂O₃ (ITO), ZnO, Al₂O₃, Ag₂O, CdO, CuO, ZnSe:ZnO etc., were prepared by this technique and characterized. Results of some of these materials will be presented in this paper. In solid-state²⁰⁷Pb NMR on PbF₂ a separate signal due to the presence of grain boundary has been observed. The structural phase transition pressure during the phase transformation from the cubic phase to orthorhombic phase under high pressure shows an increase with the decrease in grain size. Presence of electronic centres in nanocrystalline PbF₂ is observed from Raman studies and the same has been confirmed by photoluminescence studies. Al₂O₃ was prepared and⁵⁶Fe ions were implanted. After implantation segregation of⁵⁶Fe ions was examined by SEM. The oxidation properties of ITO were studied by HRTEM. As against the expectation of oxide coating on individual nanograins of In-Sn alloy, ITO nanograins grew into faceted nanograins on heat treatment in air and O₂ atmosphere. The growth of ITO under O₂ atmosphere showed pentagon symmetry. The PMN was initially prepared by solid-state reaction. Further, this PMN relaxor material will be used to convert into nanocrystalline PMN by IGCT with sputtering and will be studied     

Cycloaddition profile of pentafulvenes with 3-oxidopyrylium betaine: experimental and theoretical investigations

A detailed investigation on the effect of solvent polarity, temperature, and microwave irradiation on periselectivity in cycloaddition reactions of pentafulvenes with 3-oxidopyrylium betaine is described. The base catalyzed generation of 3-oxidopyrylium betaine in CHCl₃ resulted in the exclusive formation of [6+3] adducts. With increase in solvent polarity and temperature, mixtures of [6+3] and [3+2] adducts were formed, where as under microwave irradiation, [3+2] adducts were formed exclusively. The experimental results have been rationalized on the basis of theoretical calculations.