Coaxially gated in-wire thin-film transistors made by template assembly

Nanowire field effect transistors were prepared by a wet chemical template replication method using anodic aluminum oxide membranes. The membrane pores were first lined with a thin SiO2 layer by the surface sol-gel method. Au, CdS (or CdSe), and Au wire segments were then sequentially electrodeposited within the pores, and the resulting nanowires were released by dissolution of the membrane. Electrofluidic alignment of these nanowires between source and drain leads and evaporation of gold over the central CdS (CdSe) stripe affords a "wrap-around gate" structure. At VDS = -2 V, the Au/CdS/Au devices had an ON/OFF current ratio of 103, a threshold voltage of 2.4 V, and a subthreshold slope of 2.2 V/decade. A 3-fold decrease in the subthreshold slope relative to that of planar nanocrystalline CdSe devices can be attributed to coaxial gating. The control of dimensions afforded by template synthesis should make it possible to reduce the gate dielectric thickness, channel length, and diameter of the semiconductor segment to sublithographic dimensions while retaining the simplicity of the wet chemical synthetic method.     

Symmetry and electronic structure of noble-metal nanoparticles and the role of relativity

We present high resolution UV-photoelectron spectra of cold mass selected Cun-, Agn-, and Aun- with n=53-58. The observed electron density of states is not the expected simple electron shell structure, but is strongly influenced by electron-lattice interactions. Only Cu55- and Ag55- exhibit highly degenerate states. This is a direct consequence of their icosahedral symmetry, as is confirmed by density functional theory calculations. Neighboring sizes exhibit perturbed electronic structures, as they are formed by removal or addition of atoms to the icosahedron and therefore have lower symmetries. Gold clusters in the same size range show completely different spectra with almost no degeneracy, which indicates that they have structures of much lower symmetry. This behavior is related to strong relativistic bonding effects in gold, as demonstrated by ab initio calculations for Au55-.     

Using path sampling to build better Markovian state models: predicting the folding rate and mechanism of a tryptophan zipper beta hairpin

We propose an efficient method for the prediction of protein folding rate constants and mechanisms. We use molecular dynamics simulation data to build Markovian state models (MSMs), discrete representations of the pathways sampled. Using these MSMs, we can quickly calculate the folding probability (P(fold)) and mean first passage time of all the sampled points. In addition, we provide techniques for evaluating these values under perturbed conditions without expensive recomputations. To demonstrate this method on a challenging system, we apply these techniques to a two-dimensional model energy landscape and the folding of a tryptophan zipper beta hairpin.     

Effects of Spiro-Cyclohexane Substitution of Nitroxyl Biradicals on Dynamic Nuclear Polarization

Spiro-substituted nitroxyl biradicals are widely used as reagents for dynamic nuclear polarization (DNP), which is especially important for biopolymer research. The main criterion for their applicability as polarizing agents is the value of the spin–spin exchange interaction parameter (J), which can vary considerably when different couplers are employed that link the radical moieties. This paper describes a study on biradicals, with a ferrocene-1,1′-diyl-substituted 1,3-diazetidine-2,4-diimine coupler, that have never been used before as DNP agents. We observed a substantial difference in the temperature dependence between Electron Paramagnetic Resonance (EPR) spectra of biradicals carrying either methyl or spirocyclohexane substituents and explain the difference using Density Functional Theory (DFT) calculation results. It was shown that the replacement of methyl groups by spirocycles near the N-O group leads to an increase in the contribution of conformers having J ≈ 0. The DNP gain observed for the biradicals with methyl substituents is three times higher than that for the spiro-substituted nitroxyl biradicals and is inversely proportional to the contribution of biradicals manifesting the negligible exchange interaction. The effects of nucleophiles and substituents in the nitroxide biradicals on the ring-opening reaction of 1,3-diazetidine and the influence of the ring opening on the exchange interaction were also investigated. It was found that in contrast to the methyl-substituted nitroxide biradical (where we observed the ring-opening reaction upon the addition of amines), the ring opening does not occur in the spiro-substituted biradical owing to a steric barrier created by the bulky cyclohexyl substituents.     

1,3‐Dipolar Cycloadditions to (5Z)‐1‐Acyl‐5‐(cyanomethylidene)‐ imidazolidine‐2,4‐diones: Synthesis and Transformations of Spirohydantoin Derivatives

Cycloadditions of various 1,3‐dipoles to (5Z)‐1‐acyl‐5‐(cyanomethylidene)‐3‐methylimidazolidine‐2,4‐diones 8 or 9 , prepared in 3 steps from hydantoin ( 1 ) (Schemes 1 and 2), were studied. In all cases, reactions proceeded regio‐ and stereoselectively. The type of product depended on the 1,3‐dipole and/or dipolarophile employed as well as on reaction conditions. Thus, with stable dipoles under neutral conditions, spirohydantoin derivatives 12 – 16 were obtained (Scheme 2), while under basic or acidic conditions, pyrazole‐ or isoxazole‐5‐carboxamides 18 and 23 – 26 and carboxylate 27 were formed via aromatization of the newly formed dihydroazole ring, followed by the simultaneous cleavage of the hydantoin ring (Schemes 3 – 5).     

In situ vinylindole synthesis. Diels-alder reactions with maleimides to give tetrahydrocarbazoles

Tetrahydrocarbazoles have been prepared in one-flask syntheses from indoles, ketones or aldehydes, and maleimides, with acid catalysis. The reactions involve a condensation of the indole with the ketone or aldehyde, followed by an in situ trapping of the vinylindole in a Diels-Alder addition with a maleimide. Isomerization of the double bond into the indole nucleus gave the tetrahydrocarbazoles which were isolated ( 6, 9 , and 10 ). Variation of the indole, carbonyl compound, and maleimide has been explored. The predominant stereochemistry of the tetrahydro ring in the products is all-cis, although a second stereoisomer has been isolated. Two regioisomers were generated from all unsymmetrical 2-alkanones, except 2-butanone, which gave the single isomer 9a . Aromatization of tetrahydrocarbazoles 6 to carbazoles 7 was accomplished with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone.