Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

Enantioselective synthesis of an aziridinomitosane and selective functionalizations of a key intermediate

An enantioselective synthesis of mitosane core (-)-1 has been achieved. Key steps include a rapid assembly of a key eight-membered-ring intermediate employing ring-closing metathesis. Kinetic resolution of an advanced secondary alcohol was then accomplished by using a peptide-based asymmetric acyl transfer catalyst that was discovered from a parallel screen of catalyst candidates. Optically pure material was then converted to the mitosane core, which was the subject of additional studies on the selective modification to produce several substituted compounds containing a mitosane ring system.     

Synthesis, structural characterization, and biological studies of new antimony(III) complexes with thiones. The influence of the solvent on the geometry of the complexes

Five new antimony(III) complexes with the heterocyclic thiones 2-mercapto-benzimidazole (MBZIM), 5-ethoxy-2-mercapto-benzimidazole (EtMBZIM), and 2-mercapto-thiazolidine (MTZD) of formulas {[SbCl(2)(MBZIM)4]+.Cl-.2H(2)O. (CH(3)OH)} (1), {[SbCl(2)(MBZIM)4]+.Cl-.3H(2)O.(CH3CN)} (2), [SbCl(3)(MBZIM)2] (3), [SbCl(3)(EtMBZIM)(2)] (4), and [SbCl(3)(MTZD)2] (5) have been synthesized and characterized by elemental analysis, FT-IR, far-FT-IR, differential thermal analysis-thermogravimetry, X-ray diffraction, and conductivity measurements. Complex {[SbCl2(tHPMT)(2)]+Cl-}, (tHPMT = 2-mercapto-3,4,5,6-tetrahydro-pyrimidine), already known, was also prepared, and its X-ray crystal structure was solved. It is shown that the complex is better described as {[SbCl3(tHPMT)(2)]} (6). Crystal structures of all other complexes (1-5) have also been determined by X-ray diffraction at ambient conditions. The crystal structure of the hydrated ligand, EtMBZIM.H2O is also reported. Compound [C(28)H(24)Cl(2)N(8)S(4)Sb.2H(2)O.Cl.(CH(3)OH)] (1) crystallizes in space group P2(1), with a = 7.7398(8) A, b = 16.724(3) A, c = 13.717(2) A, beta = 98.632(11) degrees, and Z = 2. Complex [C(28)H(24)Cl(2)N(8)S(4)S(b).Cl.3H(2)O.(CH(3)CN)] (2) corresponds to space group P2(1), with a = 7.8216(8) A, b = 16.7426(17) A, c = 13.9375(16) A, beta = 99.218(10) degrees , and Z = 2. In both 1 and 2 complexes, four sulfur atoms from thione ligands and two chloride ions form an octahedral (Oh) cationic [SbS(4)Cl(2)]+ complex ion, where chlorides lie at axial positions. A third chloride counteranion neutralizes it. Complexes 1 and 2 are the first examples of antimony(III) compounds with positively charged Oh geometries. Compound [C(14)H(12)Cl(3)N(4)S(2)S(b)] (3) crystallizes in space group P, with a = 7.3034(5) A, b = 11.2277(7) A, c = 12.0172(8) A, alpha = 76.772(5) degrees, beta = 77.101(6) degrees, gamma = 87.450(5) degrees, and Z = 2. Complex [C(18)H(20)Cl(3)N(4)O(2)S(2)S(b)] (4) crystallizes in space group P1, with a = 8.6682(6) A, b = 10.6005(7) A, c = 13.0177(9) A, alpha = 84.181(6) degrees, beta = 79.358(6) degrees, gamma = 84.882(6) degrees, and Z = 2, while complex [C(6)H(10)Cl(3)N(2)S(4)S(b)] (5) in space group P2(1)/c shows a = 8.3659(10) A, b = 14.8323(19) A, c = 12.0218(13) A, beta = 99.660(12) degrees, and Z = 4 and complex [C(8)H(16)Cl(3)N(4)S(2)S(b)] (6) in space group P1 shows a = 7.4975(6) A, b = 10.3220(7) A, c = 12.1094(11) A, alpha = 71.411(7) degrees, beta = 84.244(7) degrees, gamma = 73.588(6) degrees, and Z = 2. Crystals of complexes 3-6 grown from acetonitrile solutions adopt a square-pyramidal (SP) geometry, with two sulfur atoms from thione ligands and three chloride anions around Sb(III). The equatorial plane is formed by two sulfur and two chloride atoms in complexes 3-5, in a cis-S, cis-Cl arrangement in 3 and 5 and a trans-S, trans-Cl arrangement in 4. Finally, in the case of 6, the equatorial plane is formed by three chloride ions and one sulfur from the thione ligand while the second sulfur atom takes an axial position leading to a unique SP conformation. The complexes showed a moderate cytostatic activity against tumor cell lines.     

Determination of 13 synthetic food colorants in water-soluble foods by reversed-phase high-performance liquid chromatography coupled with diode-array detector

A reversed-phase high performance liquid chromatographic method for the successful separation and determination of 13 synthetic food colorants (Tartrazine E 102, Quinoline Yellow E 104, Sunset Yellow E 110, Carmoisine E 122, Amaranth E 123, Ponceau 4R E 124, Erythrosine E 127, Red 2G E 128, Allura Red AC E 129, Patent Blue V E 131, Indigo Carmine E 132, Brilliant Blue FCF E 133 and Green S E 142) was developed. A C18 stationary phase was used and the mobile phase contained an acetonitrile-methanol (20:80 v/v) mixture and a 1% (m/v) ammonium acetate buffer solution at pH 7.5. Successful separation was obtained for all the compounds using an optimized gradient elution within 29 min. The diode-array detector was used to monitor the colorants between 350 and 800 nm. The method was thoroughly validated. Detection limits for all substances varied between 1.59 (E 142) and 22.1 (E 124) μg L⁻¹. The intra-day precision (as R.S.D._r) ranged from 0.37% (E 122 in fruit flavored drink at a concentration of 100 mg L⁻¹) to 4.8% (E 142 in icing sugar at a level of 0.9 mg kg⁻¹). The inter-day precision (as R.S.D._R) was between 0.86% for E 122 in fruit flavored drink at 100 mg L⁻¹ and 10% for E142 in jam at a concentration of 9 mg kg⁻¹. Satisfactory recoveries, ranging from 94% (E 142 in jam) to 102% (E 131 in sweets), were obtained. The method was applied to the determination of colorants in various water-soluble foods, such as fruit flavoured drinks, alcoholic drinks, jams, sugar confectionery and sweets, with simple pre-treatment (dilution or water extraction).     

Simultaneous liquid chromatographic determination of metals and organic compounds in pharmaceutical and food-supplement formulations using evaporative light scattering detection

A novel method for the non-derivatization liquid chromatographic determination of metals (potassium, aluminium, calcium and magnesium) and organic compounds (ascorbate and aspartate) was developed and validated based on evaporative light scattering detection (ELSD). Separation of calcium, magnesium and aluminium was achieved by the cation exchange column Dionex CS-14 and an aqueous TFA mobile phase according to the following time program: 0-6 min TFA 0.96 mL L⁻¹, 6-7 min linear gradient from TFA 0.96-6.4 mL L⁻¹. Separation of potassium, magnesium and aspartate was achieved by the lipophilic C₁₈ Waters Spherisorb column and isocratic aqueous 0.2 mL L⁻¹ TFA mobile phase. Separation of sodium, magnesium, ascorbate and citrate was also achieved by the C₁₈ analytical column, according to the following elution program: 0-2.5 min aqueous nonafluoropentanoic acid (NFPA) 0.5 mL L⁻¹; 2.5-3.5 min linear gradient from 0.5 mL L⁻¹ NFPA to 1.0 mL L⁻¹ TFA. In all cases, evaporation temperature was 70 °C, pressure of the nebulizing gas (nitrogen) 3.5 bar, gain 11 and the flow rate 1.0 mL min⁻¹. Resolution among calcium and magnesium was 1.8, while for all other separations was ≥3.2. Double logarithmic calibration curves were obtained within various ranges from 3-24 to 34-132 μg mL⁻¹, and with good correlation (r > 0.996). Asymmetry factor ranged from 0.9 to 1.9 and limit of detection from 1.3 (magnesium) to 17 μg mL⁻¹ (ascorbate).The developed method was applied for the assay of potassium, magnesium, calcium, aluminium, aspartate and ascorbate in pharmaceuticals and food-supplements. The accuracy of the method was evaluated using spiked samples (%recovery 95-105%, %R.S.D. < 2) and the absence of constant or proportional errors was confirmed by dilution experiments.     

Synthesis of novel tantalum oxide sub-micrometer hollow spheres with tailored shell thickness

Sub-micrometer-sized hollow tantalum oxide (Ta2O5) spheres with tunable shell thickness and void size have been fabricated exploiting beta-diketone-functionalized polystyrene (PS) beads as sacrificial templates in a sol-gel process. First, a controlled precipitation of Ta2O5 nanoparticles was carried out on the template surface by hydrolyzing tantalum ethoxide (Ta(OEt)5) at room temperature, and subsequently, the polymer core was removed either via chemical treatment with toluene or calcination at 650 degrees C. The thickness of the tantala shell precipitated on the PS core during the coating process was tuned between 100 and 142 nm by varying the concentration of tantala precursor in the reaction media. The obtained Ta2O5-coated PS particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Due to the unique optical and dielectric properties, these nanostructured materials are envisaged to be used in applications such as novel building blocks for the fabrication of advanced materials, surface coatings, catalysts, and drug delivery systems.     

Fabrication of hollow titania microspheres with tailored shell thickness

Submicron hollow spheres are an interesting class of materials that receive significant attention nowadays. Closed and mechanically robust homogeneous hollow titania microspheres with as much shell thickness as 130 nm were fabricated by coating polystyrene beads with titania nanoparticles using sol–gel chemistry and subsequently removing the core either via heating or a chemical dissolution process. The thickness of the titania shell deposited on polystyrene core was finely tuned between 100 and 130 nm by varying the concentration of titania precursor, i.e., Ti(OEt)₄ salt from 0.5 to 2 mM during the coating process. The obtained hybrid core–shell particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermo-gravimetric analysis. The approach employed is well suited to the preparation of titania-coated polystyrene hybrid particles and hollow titania spheres, which can find their applications as novel building blocks with unique optical properties for fabrication of advanced materials, catalyst, and drug delivery system.