Anisotropic diffraction and elliptic discrete solitons in two-dimensional waveguide arrays

We demonstrate that both the linear (diffraction) and the nonlinear dynamics of two-dimensional waveguide arrays are considerably more complex and versatile than their one-dimensional counterparts. The discrete diffraction properties of these arrays can be effectively altered, depending on the propagation Bloch k-vector within the first Brillouin zone of the lattice. In general, this diffraction behavior is anisotropic and therefore permits the existence of a new class of discrete elliptic solitons in the nonlinear regime.     

QuEChERS and solid phase extraction methods for the determination of energy crop pesticides in soil,plant and runoff water matrices

QuEChERS and solid phase extraction (SPE) methods were applied for determining four herbicides (metazachlor, oxyfluorfen, quizalofop-p-ethyl, quinmerac) and one insecticide (α(±)-cypermethrin) in runoff water, soil, sunflower and oilseed rape plant matrices. Determination was performed using gas chromatography mass spectrometry (GC-MS), whereas high-pressure liquid chromatography mass spectrometry (HPLC-MS) was used for quinmerac. In all substrates linearity was evaluated using matrix-matched calibration samples at five concentration levels (50–1000 ng L^?1 for water, 5–500 μg kg^?1 for soil and 2.5–500 μg kg^?1 for sunflower or oilseed rape plant). Correlation coefficient was higher than 0.992 for all pesticides in all substrates. Acceptable mean recovery values were obtained for all pesticides in water (65.4–108.8%), soil (70.0–110.0%) and plant (66.1–118.6%), with intra- and inter-day RSD% below 20%. LODs were in the range of 0.250–26.6 ng L^?1 for water, 0.10–1.8 μg kg^?1 for soil and 0.15–2.0 μg kg^?1 for plants. The methods can be efficiently applied for field dissipation studies of the pesticides in energy crop cultivations.     

Determination of the thiol redox state of organisms: new oxidative stress indicators

This study describes a new methodology by which the concentrations of non-protein (NP) thiols glutathione (GSH), cysteine (CSH), N-acetylcysteine (AcCSH), and protein (P) thiols (PSH), as well as the contribution of these components to symmetric and mixed disulfides (NPSSR, NPSSC, NPSSCAc, PSSR, PSSC, PSSCAc, PSSP) can reliably be measured. The methodology consists of a strict sequence of methods which are applied to every sample. Free thiols at any given state of the procedure are measured by Ellmans assay, the CSH fraction is measured by its unique response in the ninhydrin assay, AcCSH is selectively measured with ninhydrin after enzymatic deacylation, proteins are separated from non-protein thiols/disulfides by precipitation with trichloroacetic or perchloric acid, disulfides are reduced into free thiols with borohydride, mixed disulfides between a protein and a non-protein component are measured by extracting the non-protein thiol from the protein pellet after borohydride treatment, and protein thiols/disulfides are measured after resolubilization of the protein pellet.When this method was applied to animal and fungal tissue, new molecular indicators of the thiol redox state of living cells were identified. The findings of the present study clearly show that the new parameters are very sensitive indicators of redox state, while at the same time the traditional parameters GSH and GSSG often remain constant even upon dramatic changes in the overall redox state of biological tissue. Therefore, unbiased assessment of the redox state also requires explicit measurement of its most sensitive thiol indicators.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Formation of alkane‐phosphonic acid self‐assembled monolayers on alumina: an in situ SPR study

The formation process of n‐alkane phosphonic acid CH₃ (CH₂)_n?1 PO(OH)₂ (n = 10,12,14,18) self‐assembled monolayers (SAMs), deposited from ethanol solutions on aluminum oxide, has been monitored in situ using surface plasmon resonance (SPR) spectroscopy. In addition, the two‐solvent approach is used to obtain both film thickness and refractive index of the fully formed adsorbed layers. A densely packed adsorbed layer is formed only for the longest molecules with n = 18. The chain length and solution concentration dependence of formation kinetics are studied, and the existence of two distinct kinetic steps is revealed. Fittings of the experimental results with various kinetic models are performed. Our analysis suggests that during the first kinetic step, a transition from a lying‐down to a standing‐up phase takes place, and the growth of this standing‐up phase is governed by second‐order kinetics. The second slow kinetic step is described by a modified first‐order Langmuir law. Copyright © 2009 John Wiley & Sons, Ltd.     

Analysis of anaesthetics and analgesics in human urine by headspace SPME and GC

The determination of widely used anaesthetic and analgesic drugs in biological fluids is of major clinical importance. Typical methods used for sample preparation employ liquid–liquid extraction protocols which are complex, costly, not handy and not amenable to automation. In the present communication, we report the development of a methodology that employs headspace solid‐phase microextraction (HS‐SPME) for the determination of four anaesthetic (lidocaine, midazolam, diazepam and ketamine) and three analgesic drugs (fentanyl, remifentanyl and codeine) in human urine. Important parameters controlling SPME were studied: selection of SPME fibre, type and amount of salt added, preheating and extraction time, extraction temperature, sample volume and desorption time. GC with nitrogen phosphorus detection (GC‐NPD) facilitates sensitive and selective detection of the anaesthetics. The developed method renders an efficient tool for the precise and sensitive determination of the anaesthetics and analgesics in human urine (RSDs ranged from 7.7 to 12.6%, whereas LODs ranged from 0.01 to 1.5 ng/mL). The method was applied to the determination of the anaesthetics and analgesics in human urine from patients that had undergone coronary by‐pass surgery operations. The proposed protocol can function as an attractive alternative for clinical acute intoxications and medico‐legal cases.     

Improper hydrogen-bonded cyclohexane C-Hax?Yax contacts: experimental evidence from H NMR spectroscopy of suitable axial cyclohexane models

B3LYP/6-31+G(d,p) calculations predicted the presence of improper hydrogen-bonded C-H_ax?Y_ax contacts of different strength in cyclohexane derivatives;¹ it was predicted that the addition of an appropriate bridging fragment X_ax between an axial substituent Y₁ and a cyclohexane carbon would strengthen the improper hydrogen-bonded contact C-H_ax?Y₁ when the X_ax-Y₁ bond vector bisects the cyclohexane ring. To support the theoretical predictions with experimental evidence for this effect, several 2-substituted adamantane analogues with suitable improper H-bonded C-H_ax?O contacts of different strength were synthesized, as models of the corresponding cyclohexane derivatives, and their ¹H NMR spectra were recorded at 298 K. The ¹H NMR signal separation within the cyclohexane ring γ-CH₂s is increased when the B3LYP/6-31+G(d,p)-calculated strength of the H-bonded C-H_ax?O=C_ax contact interaction is increased.     

Adsorption of block copolymers in nanoporous alumina

We have studied the adsorption of end-attaching block copolymer chains inside the cylindrical pores of nanoporous alumina. Highly asymmetric PS-PEO block copolymers, with a small PEO anchoring block and a long PS dangling block, were allowed to adsorb onto porous alumina substrates with an average pore diameter of ∼200 nm from toluene solution. The adsorption process was monitored using FTIR spectroscopy, whereas depth profile analysis was performed by means of XPS and Ar⁺ ion sputtering. It is found that the PS-PEO adsorption kinetics in porous alumina are ∼4 orders of magnitude slower than the corresponding case of a flat alumina substrate. It appears that chains adsorbed near the pore entrance early on tend to form a barrier for chains entering the pore at later times, thereby slowing down the adsorption process significantly. This effect is much more pronounced for large chains whose dimensions are comparable with the pore diameter. The equilibrium adsorbance value is also affected by chain size due to the additional entropic penalty associated with chain confinement, the adsorbance falling substantially when the chain dimensions become comparable with the pore diameter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1676–1682, 2010     

Structural Characterization of Graphene Nanosheets for Miniaturization of Potentiometric Urea Lipid Film Based Biosensors

The present article describes a miniaturized potentiometric urea lipid film based biosensor on graphene nanosheets. Structural characterization of graphene nanosheets for miniaturization of potentiometric urea lipid film based biosensors have been studied through atomic force microscopy (AFM) and transmission electron microscopy (TEM) measurements. UV‐Vis and Fourrier transform IR (FTIR) spectroscopy have been utilized to study the pre‐ and postconjugated surfaces of graphene nanosheets. The presented potentiometric urea biosensor exhibits good reproducibility, reusability, selectivity, rapid response times (～4 s), long shelf life and high sensitivity of ca. 70 mV/decade over the urea logarithmic concentration range from 1×10^?6 M to 1×10^?3 M.     

2,4‐Diamino‐5‐(1‐naphthyl)‐3,5‐diaza‐1‐azoniaspiro[5.5]undeca‐1,3‐diene chloride

The title salt, C₁₈H₂₂N₅⁺·Cl^?, is a member of a new series of lipophilic 4,6‐di­amino spiro‐s‐triazines which are potent in­hib­itors of di­hydro­folate reductase. The protonated triazine ring deviates from planarity, whereas the cyclo­hexane ring adopts a chair conformation. A rather unusual hydrogen‐bonding scheme exists in the crystal. There is a centrosymmetric arrangement involving two amino groups and two triazine ring N atoms, with graph‐set R(8) and an N?N distance of 3.098 (3) Å, flanked by two additional R(8) systems, involving two amino groups, a triazine ring N atom and a Cl^? anion, with N?Cl distances in the range 3.179 (2)–3.278 (2) Å. Furthermore, the Cl^? anion, the protonated triazine ring N atom and an amino group form a hydrogen‐bonding system with graph‐set R(6).