Subcomponent self-assembly of circular helical Dy6(L)6 and bipyramid Dy12(L)8 architectures directed via second-order template effects

In situ metal-templated (hydrazone) condensation also called subcomponent self-assembly of 4,6-dihydrazino-pyrimidine, o-vanillin and dysprosium ions resulted in the formation of discrete hexa- or dodecanuclear metallosupramolecular Dy₆(L)₆ or Dy₁₂(L)₈ aggregates resulting from second-order template effects of the base and the lanthanide counterions used in these processes. XRD analysis revealed unique circular helical or tetragonal bipyramid architectures in which the bis(hydrazone) ligand L adopts different conformations and shows remarkable differences in its mode of metal coordination. While a molecule of trimethylamine acts as a secondary template that fills the void of the Dy₆(L)₆ assembly, sodium ions take on this role for the formation of heterobimetallic Dy₁₂(L)₈ by occupying vacant coordination sites, thus demonstrating that these processes can be steered in different directions upon subtle changes of reaction conditions. Furthermore, Dy₆(L)₆ shows an interesting spin-relaxation energy barrier of 435 K, which is amongst the largest values within multinuclear lanthanide single-molecular magnets.

Subcomponent self-assembly gave access to Dy₁₂(L)₈ and Dy₆(L)₆ architectures via second-order template effects. The Dy₆(L)₆ assembly behaves as a single-molecule magnet exhibiting a high anisotropy barrier and butterfly-shaped magnetic hysteresis.     

Electrification of a Milstein-type catalyst for alcohol reformation

Novel energy and atom efficiency processes will be keys to develop the sustainable chemical industry of the future. Electrification could play an important role, by allowing to fine-tune energy input and using the ideal redox agent: the electron. Here we demonstrate that a commercially available Milstein ruthenium catalyst (1) can be used to promote the electrochemical oxidation of ethanol to ethyl acetate and acetate, thus demonstrating the four electron oxidation under preparative conditions. Cyclic voltammetry and DFT-calculations are used to devise a possible catalytic cycle based on a thermal chemical step generating the key hydride intermediate. Successful electrification of Milstein-type catalysts opens a pathway to use alcohols as a renewable feedstock for the generation of esters and other key building blocks in organic chemistry, thus contributing to increase energy efficiency in organic redox chemistry.

Electrification of the Milstein catalyst enabled successful molecular electrocatalytic oxidation of ethanol to the four-electron products acetate and ethyl acetate.

In order to achieve the goals of the Sustainable Development Scenario (SDS) of the International Energy Agency, the chemical industry''s emission should decline by around 10% before 2030.^1,2 This could be achieved by increasing energy efficiency and the usage of renewable feedstocks. In this respect, molecular electrocatalytic alcohol oxidation could be powerful tool by potentially providing energy and atom efficiency for organic synthesis and energy applications.^2–7 Besides the use of aminoxyl-derivatives,^8–13 especially the seminal work of Vizza, Bianchini and Grützmacher demonstrated that (transfer)-hydrogenation (TH) catalysts could be activated electrochemically and used in a so-called “organometallic fuel cell”.¹⁴ Other TH systems are however mostly limited to two electron oxidations of secondary or benzylic alcohols (Scheme 1A).^15–21Open in a separate windowScheme 1(A) Advantages/limitation of electrochemical homogeneous alcohol oxidation using well-defined catalysts. (B) Current efforts to electrify acceptor-less alcohol dehydrogenation (AAD) systems due to their large range of application in thermal catalysis.As an exception, Waymouth et al. recently reported an example of the intramolecular coupling of vicinal benzylic alcohols to the corresponding esters.^19,22 In order to extend the range of possible catalysts candidates, the Waymouth group recently also explored the possibility to use an iron-based acceptor-less alcohol dehydrogenation (AAD) catalysts²³ for electrocatalytic alcohol oxidation (Scheme 1B).²⁴ The stability under electrochemical conditions in this case is limited to <2 turnovers, but it opens the door to explore a wide range of AAD reactions under electrochemical conditions. Here, we demonstrate that a commercially available Milstein-type AAD catalyst (1)²⁵ is competent for the electrocatalytic alcohol oxidation of ethanol to ethyl acetate and acetate (Scheme 1B).The cyclic voltammogram (CV) of complex 1 (Fig. 1) shows a quasi-reversible diffusive one electron oxidation wave at 0.2 V (all potentials are referenced vs. Fc⁺/Fc⁰) in 0.2 M NaPF₆ THF/DFB (2 : 1) (DFB = 1,2 difluoro benzene) assigned to the Ru(ii)–Ru(iii) couple (see ESI, section 2.2^†). The addition of 1 to a 10 mM sodium ethoxide (NaOEt) solution in 200 mM ethanol (EtOH) in 0.1 M NaPF₆ (2 : 1 THF/DFB) gives rise to several waves at ca. −0.5, 0.0 and 0.2 V with currents significantly higher than in the absence of catalysts or substrate, indicative of possible catalytic turnover (Fig. 2). Gradual increase of the EtOH concentration from 200 mM to 1 M is accompanied by the disappearance of the first wave at −0.5 V, while a new oxidation wave appears at ca. −0.25 V (Fig. 2, light to dark green traces).Open in a separate windowFig. 1Scan rate dependence of a 1 mM solution of 1 in in 2 : 1 THF/DFB + 0.2 M NaPF6 (from light to dark green: 0.05, 0.1, 0.2, 0.3, 0.4 and 0.5 V s⁻¹, 3 mm GC electrode). Inset: evolution of the peak current as a function of the square root of the scan rate.Open in a separate windowFig. 2CVs of 10 mM NaOEt (grey) and of 5 mM 1 + 5 mM NaOEt with increasing concentrations of EtOH (from light to dark green: 200, 400, 600, 800 and 1000 mM) in 2 : 1 THF/DFB + 0.2 M NaPF₆. Scan rate 0.1 V s⁻¹, electrode: 3 mm diameter GC electrode.Increasing the base loading gradually from 5 to 20 mM yields a stark increase of current at this new wave at ca. −0.25 V (Fig. 3). Using (TBA)PF₆ instead of NaPF₆ (used to avoid Hofmann-elimination²⁶) gave similar results (see ESI, section 2.2–2.5 and section 4^†). In order to assess catalytic turnover under preparative conditions, controlled potential electrolysis (CPE) was performed. CPE experiments were run in pure ethanol (to reduce cell resistance) in the presence of 0.1 M electrolyte of well soluble bases (e.g. NaOEt, LiOH, see ESI section 4^†). CPE in 0.1 M LiOH with 1 mM 1 at E = 0 V vs. Fc^0/+ delivered ca. 15 mM of acetate and 6 mM of ethyl acetate, corresponding to 21 turnovers (per 4 electrons, or 42 turnovers per two electrons) and a faradaic efficiency (FE) of ca. 62% (see ESI section 4.3^†). In the absence of applied potential (OCP, open circuit potential), no ethyl acetate was formed (see ESI, section 4.4^†). Likewise, in the absence of catalyst, the passed charge was significantly lower (7C vs. 40C) with no detected formation of ethyl acetate. The low FE could be due to catalyst degradation, as Ru-nanoparticle formation is observed on the electrode post CPE (confirmed by SEM/Elemental mapping, see ESI section 5^†). Noteworthy, rinse-test CPE and a CPE using a simple Ru-precursor, RuCl₃, did not show any ethyl acetate formation and gave similar results to blank experiments, indicating that Ru-nanoparticles are probably not the active catalyst species and that catalyst instability could be responsible for low FE. Further studies are underway to fully understand catalyst speciation under preparative conditions (see ESI section 4.7^†) the observed catalytic activity of 1 compares well in terms of TON and product selectivity with other molecular homogeneous TH systems, with most systems being limited to the two-electron oxidation of secondary or benzylic alcohols. The Waymouth group reported a NNC ruthenium pincer for the oxidation of isopropanol to acetone with a TON of 4.¹⁸ The same group reported on the usage of phenoxy mediators with an iridium pincer complex, reaching a TON of 8 for the same reaction.²² Bonitatibus and co-workers demonstrated the activity of an iridium-based systems with a TON of 32 for the formation of p-benzaldehyde.¹⁷ Appel and co-workers reported on a nickel (TON = 3.1)¹⁵ and a cobalt triphos systems (TON = 19.9)¹⁶ for benzaldehyde formation from benzyl alcohol. To the best of our knowledge, there is only one acceptor-less alcohol dehydrogenation (AAD) catalyst that has been activated electrochemically so-far,²⁴ generating acetone with a TON <2. Only a handful of molecular systems are known to catalyze the electrochemical four electron alcohol reformation to esters, however at significantly higher potentials (1.15 V vs. Fc⁺/Fc⁰).^2,27,28 Thus, although not designed for electrochemical applications, 1 shows high activity for the challenging 4 electron oxidation of aliphatic substrates.Open in a separate windowFig. 3CV of 5 mM NaOEt (grey), 5 mM of 1 + 1 M EtOH with varying concentrations of base (5, 10, 15, and 20 mM NaOEt, light to dark green) in 2 : 1 THF/DFB + 0.2 M NaPF₆. Scan rate 0.1 V s⁻¹, electrode: 3 mm diameter GC electrode.To achieve the transposition from thermal to electrochemical TH, both Grützmacher et al. and Waymouth took advantage of a fast equilibrium between the alcohol substrate and a metal hydride intermediate that could be readily oxidized. The chemistry of ruthenium pincer AAD systems is well studied (Scheme 2)^25,29–33 and allows for a putative assignment of the observed CV-behavior. In the presence of excess base and alcohol (Fig. 2 and ​and3),3), 1 is expected to yield dearomatized complex 2,²⁵ as well as the alkoxide species 3.^25,32 We might therefore assign the first wave at −0.5 V to the oxidation of dearomatized complex 2 and the wave around 0 V to the oxidation of the alkoxide complex 3. Indeed, independently synthesized samples of 2 and 3 (in the presence of excess ethanol) give rise to oxidation half-waves at −0.45 V and −0.1 V respectively (see ESI, section 3 and 5.2^†). This is also in agreement with the observed behavior upon increasing the alcohol concentration with the expected consumption of dearomatized species 2 and concomitant disappearance of the first oxidation wave at −0.5 V. The equilibrium between 2, 3 and 4 has been reported³² and addition of excess ethanol to 2 is thus not only generating 3, but also is expected to deliver 4 (Scheme 2). The appearance of a new anodic wave at ca. −0.25 V (Fig. 2) is thus attributed to the increasing formation of 4 upon addition of larger amounts of EtOH. Complex 4 is relatively unstable in solution,^25,32,33 and decomposes in the presence of electrolyte (see ESI section 3.1^†). DFT calculations were thus used to predict its oxidation potential (see ESI, section 6^†), which was in reasonable agreement with the observed wave (−0.19 V). The DFT calculations also confirmed the assignment of the other waves related to the dearomatized complex 2 (−0.33 V) and the ethoxide species 3 (−0.1 V). A more detailed mechanistic analysis remains currently hampered by the chemical instability of 4 under the employed reaction conditions, as well as difficulties to isolate 3 in the solid state (limiting kinetic measurements). DFT calculations were thus used to get a better view on possible reaction pathways (Schemes 2, ​,33 and ESI section 6.3^†). The oxidation of 4 at −0.19 V (DFT) yields the radical cation 5, with a calculated pK_a in THF of 8.2. In the presence of NaOEt, 5 should thus deprotonate readily to give radical 6, which has an extremely negative oxidation potential of −2.1 V. At the potential it is generated, 6 should thus directly be oxidized to cationic complex 7. This cationic species 7 has a calculated pK_a of 22.7 in THF, which is in good agreement with experimental data from the Saouma group on a similar system.²⁶ The high pK_a of 7 in THF also validates the need for a strong base (e.g. NaOEt) to reform dearomatized 2. Both Grützmacher and co-workers,¹⁴ as well as Waymouth²⁴ have noted that the accelerating effect during electrocatalysis stems from the oxidation of a metal hydride intermediate that is generated by fast chemical steps. In order to verify this hypothesis and to exclude an electrochemical activation of this hydride formation step, transition state barriers were computed (Scheme 3). Taking the dearomatized complex 2 as a reference point, a first step will form the alkoxide species 3 (TS₀ = 21.2 kcal mol⁻¹). Oxidizing 2 to 8 slows down the formation of the alkoxide species (T_S0^ox = 27.5 kcal mol⁻¹), most-likely due to decreased basicity of the ligand. From the alkoxide species 3 dihydride 4 is formed via a linear, charge-separated transition state TS₁ (15.7 kcal mol⁻¹). The role of such linear transition states was highlighted recently in the case of ruthenium pincer catalysis for alcohol oxidation.^34–37 In principle, it might be envisioned that the oxidation of the metal center could be an additional driving force for this hydride abstraction step. However, after oxidation, the energy span^38,39 rises by about 11 kcal mol⁻¹ (TS₁^ox = 24.7 kcal mol⁻¹). Likewise, a beta-hydride elimination via side-arm opening is not accelerated either by oxidation (TS₂^ox = 37.5 kcal mol⁻¹, see ESI section 6.4^†). It thus seems that the generation of 4 is not accelerated by electron transfer steps and relies on a thermally activated chemical step. Importantly, alkoxide solutions were shown to be excellent hydride donors electrochemically, further corroborating that under the employed basic conditions, generation of 4 from 3 should be fast.⁴⁰ Oxidation of 4 to 5 also doesn''t accelerate thermal intramolecular release of H₂ (TS_3B^ox = 37.5 kcal mol⁻¹), which is significantly higher than neutral thermal H₂-releasing states (TS_3A and TS_3B). The experimentally observed acceleration via electron-transfer is thus proposed to follow a classical ECEC mechanism initiated by the oxidation of 4 to 5 (at roughly −0.19 V (DFT)), followed by deprotonation and re-oxidation as described above, finally delivering 2 at the electrode surface. Importantly, at the electrode surface 2 and 3 should be oxidized at the employed potentials, but based on DFT-calculations, these pathways are thought to be non-productive (Scheme 3) and could explain the low catalyst life-time and degradation under electrochemical conditions.Open in a separate windowScheme 2Reactivity of pyridine-based ruthenium complexes via dearomatization/aromatization, as well as DFT-based.Open in a separate windowScheme 3DFT-calculated energy landscape for the neutral (black dotted lines and bars) and cationic surface (blue dotted lines and bars) of ethanol dehydrogenation starting from 2 or its cationic analogue 8.     

Über die Stefan'sche Entwicklung der Maxwell'schen Gleichungen für gleichartige Mittel und ihre Voraussetzungen

Ohne Zusammenfassung     

Microstructured cocultures of cardiac myocytes and fibroblasts: a two-dimensional in vitro model of cardiac tissue.

Cardiac myocytes and fibroblasts are essential elements of myocardial tissue structure and function. In vivo, myocytes constitute the majority of cardiac tissue volume, whereas fibroblasts dominate in numbers. In vitro, cardiac cell cultures are usually designed to exclude fibroblasts, which, because of their maintained proliferative potential, tend to overgrow the myocytes. Recent advances in microstructuring of cultures and cell growth on elastic membranes have greatly enhanced in vitro preservation of tissue properties and offer a novel platform technology for producing more in vivo-like models of myocardium. We used microfluidic techniques to grow two-dimensional structured cardiac tissue models, containing both myocytes and fibroblasts, and characterized cell morphology, distribution, and coupling using immunohistochemical techniques. In vitro findings were compared with in vivo ventricular cyto-architecture. Cardiac myocytes and fibroblasts, cultured on intersecting 30-microm-wide collagen tracks, acquire an in vivo-like phenotype. Their spatial arrangement closely resembles that observed in native tissue: Strands of highly aligned myocytes are surrounded by parallel threads of fibroblasts. In this in vitro system, fibroblasts form contacts with other fibroblasts and myocytes, which can support homogeneous and heterogeneous gap junctional coupling, as observed in vivo. We conclude that structured cocultures of cardiomyocytes and fibroblasts mimic in vivo ventricular tissue organization and provide a novel tool for in vitro research into cardiac electromechanical function.     

Elastic electron scattering from state-selected molecules

Electronically elastic, electron scattering cross sections are calculated for molecules in particular rotational states in order to establish the sensitivity of the scattering pattern to the quantum state. For the examples of diatomic molecules and symmetric tops considered here, the scattering pattern provides a unique fingerprint of the quantum state if one measures the scattered intensity for different orientations of the scattering vectors. The structure in the scattered intensity reflects the anisotropy of the square of the rotational wavefunction. Even for low angular momentum states which have diffuse rotational wavefunctions, very large differences in intensity are the result at certain scattering angles for states whose quantum numbers differ even by only one unit.     

Synthesis of Optically Active endo,endo Bicyclo[2.2.2]octane-2,5-diol, Bicyclo[2.2.2]octane-2,5-dione, and Related Compounds

Optically active C(2)-symmetric (1S,2S,4S,5S)-bicyclo[2.2.2]octane-2,5-diol ((+)-12; 98% ee) and several selectively protected optically active intermediates useful for synthetic transformations were synthesized via a 1,2-carbonyl transposition route starting from the easily available optically active (1R,4S,6S)-6-hydroxybicyclo[2.2.2]octan-2-one ((-)-2). The synthetic route also allowed the preparation of optically active (1S,4S)-bicyclo[2.2.2]octane-2,5-dione ((+)-14; 98% ee).     

Carbon dioxide reduction by an Al–O–P frustrated Lewis pair

The reaction of tBu₂P(O)H with Bis₂AlH (Bis = CH(SiMe₃)₂) afforded the adduct tBu₂P(H)–O–Al(H)Bis₂ (3). It slowly releases H₂ to form the first oxygen-bridged geminal Al/P frustrated Lewis pair tBu₂P–O–AlBis₂. It is capable of reversibly binding molecular hydrogen to afford 3, shown by NMR and H/D scrambling experiments, and forms a 1,2-adduct with CO₂. Importantly, the H₂ adduct 3 reduces CO₂ in a stoichiometric reaction leading to the formic acid adduct tBu₂P(H)–O–Al(CO₂H)Bis₂. The formation of the different species was explored by density functional theory calculations which provide support for the experimental results. All products were characterized by NMR spectroscopy as well as X-ray diffraction experiments and elemental analyses.

Addition vs. reduction: the geminal FLP Bis₂Al–O–PtBu₂ can reversibly bind molecular hydrogen, it reacts with CO₂ to give an adduct, and its hydrogen adduct reduces CO₂ to an adduct of formic acid.     

Study of perrhenate reduction by capillary electrophoresis

The influence of perrhenate concentration, the concentration of the reducing agent and pH of the reaction mixture on the yield of perrhenate reduction were studied to find a possibility to decrease the stannous chloride concentration in the reaction mixture without negative changes on the yield of perrhenate reduction. Britton-Robinson buffer solutions were selected as the background electrolytes because of their buffering capacity in a wide pH interval. The highest degree of perrhenate reduction was obtained at pH 2 at perrhenate concentrations ranging from 10(-4) to 10(-3) mol/L. The stability of reduced rhenium against pH change from 2 to 5.5 and against dilution of rhenium in the reaction mixture to the concentration suitable for the application in radiotherapy were studied as well. The results obtained by capillary electrophoresis and by thin-layer chromatography with radiometric detection were compared.     

Measurement of the electric form factor of the neutron at Q2 = 0.3-0.8 (GeV/ c) 2 ⋆

The electric form factor of the neutron, G_E,n, has been measured at the Mainz Microtron by recoil polarimetry in the quasielastic D(¯e, e¯n)p reaction. Three data points have been extracted at squared four-momentum transfers Q ² = 0.3, 0.6 and 0.8 (GeV/c)². Corrections for nuclear binding effects have been applied.This revised version was published online in March 2005. In the previous version, the email address of one author was inadvertently assigned to multiple authors.