Plasmophore sensitized imaging of ammonia release from biological tissues using optodes

A plasmophore sensitized optode was developed for imaging ammonia (NH(3)) concentrations in muscle tissues. The developed ammonia sensor and an equivalent non plasmophore version of the sensor were tested side by side to compare their limit of detection, dynamic range, reversibility and overall imaging quality. Bio-degradation patterns of ammonia release from lean porcine skeletal muscle were studied over a period of 11 days. We demonstrate that ammonia concentrations ranging from 10nM can be quantified reversibly with an optical resolution of 127 μm in a sample area of 25 mm × 35 mm. The plasmophore ammonia optode showed improved reversibility, less false pixels and a 2 nM ammonia detection limit compared to 200 nM for the non-plasmophore sensor. Main principles of the sensing mechanism include ammonia transfer over a gas permeable film, ammonia protonation, nonactin facilitated merocyanine-ammonium coextraction and plasmophore enhancement. The vast signal improvement is suggested to rely on solvatochroism, nanoparticle scattering and plasmonic interactions that are utilized constructively in a fluorescence ratio. In addition to fundamental medicinal and biological research applications in tissue physiology, reversible ammonia quantification will be possible for a majority of demanding imaging and non imaging applications such as monitoring of low ammonia background concentrations in air and non-invasive medicinal diagnosis through medical breath or saliva analysis. The nanoparticle doped sensor constitutes a highly competitive technique for ammonia sensing in complex matrixes and the general sensing scheme offers new possibilities for the development of artificial optical noses and tongues.     

On the origins of core-electron chemical shifts of small biomolecules in aqueous solution: insights from photoemission and ab initio calculations of glycine(aq)

The local electronic structure of glycine in neutral, basic, and acidic aqueous solution is studied experimentally by X-ray photoelectron spectroscopy and theoretically by molecular dynamics simulations accompanied by first-principle electronic structure and spectrum calculations. Measured and computed nitrogen and carbon 1s binding energies are assigned to different local atomic environments, which are shown to be sensitive to the protonation/deprotonation of the amino and carboxyl functional groups at different pH values. We report the first accurate computation of core-level chemical shifts of an aqueous solute in various protonation states and explicitly show how the distributions of photoelectron binding energies (core-level peak widths) are related to the details of the hydrogen bond configurations, i.e. the geometries of the water solvation shell and the associated electronic screening. The comparison between the experiments and calculations further enables the separation of protonation-induced (covalent) and solvent-induced (electrostatic) screening contributions to the chemical shifts in the aqueous phase. The present core-level line shape analysis facilitates an accurate interpretation of photoelectron spectra from larger biomolecular solutes than glycine.     

Lanthanide Clusters with Chalcogen Encapsulated Ln: NIR Emission from Nanoscale NdSe(x)

Ln(SePh)(3) (Ln = Ce, Pr, Nd) reacts with elemental Se in the presence of Na ions to give (py)(16)Ln(17)NaSe(18)(SePh)(16), a spherical cluster with a 1 nm diameter. All three rare-earth metals form isostructural products. The molecular structure contains a central Ln ion surrounded by eight five-coordinate Se(2-) that are then surrounded by a group of 16 Ln that define the cluster surface, with additional μ(3) and μ(5) Se(2-), μ(3) and μ(4) SePh(-), and pyridine donors saturating the vacant coordination sites of the surface Ln, and a Na ion coordinating to selenolates, a selenido, and pyridine ligands. NIR emission studies of the Nd compound reveal that this material has a 35% quantum efficiency, with four transitions from the excited state (4)F(3/2) ion to (4)I(9/2), (4)I(11/2), (4)I(13/2), and (4)I(15/2) states clearly evident. The presence of Na(+) is key to the formation of these larger clusters, where reactions using identical concentrations of Nd(SePh)(3) and Se with either Li or K led only to the isolation of (py)(8)Nd(8)Se(6)(SePh)(12).     

Ionic-charge dependence of the intermolecular coulombic decay time scale for aqueous ions probed by the core-hole clock

Auger electron spectroscopy combined with theoretical calculations has been applied to investigate the decay of the Ca 2p core hole of aqueous Ca(2+). Beyond the localized two-hole final states on the calcium ion, originating from a normal Auger process, we have further identified the final states delocalized between the calcium ion and its water surroundings and produced by core level intermolecular Coulombic decay (ICD) processes. By applying the core-hole clock method, the time scale of the core level ICD was determined to be 33 ± 1 fs for the 2p core hole of the aqueous Ca(2+). The comparison of this time constant to those associated with the aqueous K(+), Na(+), Mg(2+), and Al(3+) ions reveals differences of 1 and up to 2 orders of magnitude. Such large variations in the characteristic time scales of the core level ICD processes is qualitatively explained by different internal decay mechanisms in different ions as well as by different ion-solvent distances and interactions.     

Oxidation of Au by surface OH: nucleation and electronic structure of gold on hydroxylated MgO(001)

The nucleation and electronic structure of vapor-deposited Au on hydroxylated MgO(001) surfaces has been investigated under ultrahigh vacuum conditions. Hydroxylated MgO(001) surfaces with two different hydroxyl coverages, 0.4 and 1 monolayer, respectively, were prepared by exposure to water (D(2)O) at room temperature. Scanning tunneling microscopy experiments show significantly higher gold particle densities and smaller particle sizes on the hydroxylated MgO surface as compared to gold deposited on clean MgO(001). Infrared spectroscopy and X-ray photoelectron spectroscopy experiments were performed to reveal details about the initial nucleation of gold. Gold atoms are found to chemically interact with a specific type of hydroxyl groups on the MgO surface, leading to the formation of oxidized gold particles. The enhanced adhesion of Au particles, which is due to the formation of strong Au-O interfacial bonds, is responsible for the observed higher stability of small Au clusters toward thermal sintering on hydroxylated MgO surfaces. The results are compared to similar studies on Au/TiO(2)(110) model systems and powder samples prepared by the deposition-precipitation route.     

Optimization of preparative chromatographic separation of multiple rare earth elements

This work presents a method to optimize multi-product chromatographic systems with multiple objective functions. The system studied is a neodymium, samarium, europium, gadolinium mixture separated in an ion exchange chromatography step. A homogeneous Langmuir Mobile Phase Modified model is calibrated to fit the experiments, and then used to perform the optimization task. For the optimization a multi-objective Differential Evolution algorithm was used, with weighting based on relative value of the components to find optimal operation points along the Pareto front. The objectives of the Pareto front are weighted productivity and weighted yield with purity as an equality constraint. A prioritizing scheme based on relative values is applied for determining the pooling order. A simple rule of thumb for pooling strategy selection is presented. The multi-objective optimization gives a Pareto front which shows the rule of thumb, as a gap in one of the objective functions.     

Exploring new mass regions with the ISOLTRAP spectrometer

First direct mass measurements on rare earth isotopes around ¹⁴⁶Gd have been performed with the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. More than 40 isotopes of the elements Pr, Nd, Pm, Sm, Eu, Dy and Ho have been measured with an accuracy of typically 1 × 10^-7. In the case of ¹⁴¹Sm isomeric and ground state (ΔE = 175 keV) were resolved. Since isobaric contaminations are present in the ISOLDE beam, these measurements on rare earth isotopes became only possible after the installation of a new cooler trap which acts an isobar separator. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrical properties of semiconductor surfaces

The formation of space charge layers by the action of surface states and the influence of more than one bulk impurity level are treated. Special attention is given to compound semiconductors. Recent experimental results are reported of subband spectroscopy, work function measurements, and metal semiconductor junction investigations. Requirements for simultaneous surface conductivity and LEED measurements are given. The contribution of various scattering processes to the dc conductivity is discussed. Finally the relations between surface reactions and space charge layers are considered.