Critical evaluation of additivity schemes for estimating heats of atomization

Additivity schemes for estimating heats of formation and heats of atomization of alkanes and halo- alkanes are scrutinized. A least squares analysis of the heats of atomization of alkanes leads to a revision of the values of the parameters. The improvement in the estimated heats of atomization over the values obtained with parameters previously suggested amounts to at least 100%. The reasons for the deviations from the experimental values are discussed. These parameters can be transfered to haloalkanes. Additional parameters necessary for estimating heats of atomization of haloalkanes are also obtained through least squares analyses.     

Enhancement of combinatorial chemistry by microwave-assisted organic synthesis

It was in the 1980 s that the first papers in which the use of either combinatorial methods or microwave heating in organic chemistry were published. Unlike combinatorial chemistry, which quite readily became an accepted method, particularly in the pharmaceutical industry, it is only now that microwave heating is truly gaining acceptance. Our aim in this review is to attempt to rationalize this slow acceptance and to show the benefits to be gained by employing microwave heating in tandem with combinatorial chemistry. We will also give a number of examples of successful applications.     

f-Element disiloxanediolates: novel Si-O-based inorganic heterocycles

The preparation and structural characterization of scandium and f-element complexes derived from the disiloxanediolate dianion, [(Ph2SiO)2O]2-, are reported. Reactions of in situ prepared Ln[N(SiMe3)2]3 (Ln = Eu, Sm, Gd) with (Ph2SiOH)2O in different stoichiometries afforded the lanthanide disiloxanediolates [Eu[[(Ph2SiO)2O]Li(Et2O)]3] (1), [[[(Ph2SiO)2O]Li(dme)]2SmCl(dme)] (2), and [[[((Ph2SiO)2O]Li(thf)2]2GdN(SiMe3)2] (3). In situ formed (Ph2SiOLi)2O reacted with anhydrous NdBr3 (molar ratio 3:1) to give polymeric [[Nd[(Ph2SiO)2O]3[mu-Li(thf)]2[mu2LiBrLi(thf)(Et2O)]]n] (4). Treatment of 3 with Ph2Si(OH)2 in the presence of acetonitrile yielded the dilithium trisiloxanediolate derivative [[Ph2Si(OSiPh2O)2][Li(MeCN)]2]2 (5), which according to an X-ray analysis displays an Li4O4 heterocubane structure. The trinuclear scandium complex [[[(Ph2SiO)2O]Sc(acac)2]2Sc(acac)] (6) was obtained by reaction of [(C5Me5)Sc(acac)2] (C5Me5 = eta5-pentamethylcyclopentadienyl) with (Ph2SiOH)2O in a 3:2 molar ratio. Selective formation of the colorless uranium(VI) derivative [U[Ph2Si(OSiPh20)2]2[(Ph2SiO)2O]] (7) was observed when uranocene, U(eta8-C8H8)2, was allowed to react with (Ph2SiOH)2O. An X-ray diffraction study of the solvated derivative [U[Ph2Si(OSiPh2O)2]2[(Ph2SiO)2O]].Et2O.TMEDA (TMEDA= N,N,N',N'-tetramethyl-ethylenediamine) (7a) revealed the presence of both the original [(Ph2SiO)2O]2- dianion as well as the ring-enlarged [Ph2Si(OSiPh2O)2]2- ligand in the same molecule.     

The behaviour of micro-bitumen drops in aqueous clay environments

This study summarises the rheological behaviour of emulsion bitumen drops in the presence of aqueous solutions of de-ionised or process water (DIW or PW) containing montmorillonite clays (M) and/or calcium ions (Ca++). The presence of calcium ions and montmorillonite clays resulted in the plastic behaviour of bitumen drops. In a DIW+M+Ca++ system, increasing temperature and calcium ion concentration resulted in an increase in the number and degree of plastic bitumen drops. In the presence of considerable amounts of Ca++ ions and/or at higher experimental temperature, bitumen drops in a PW+M system exhibited no significant overall plasticity of their surfaces. Both calcium and sodium ions contained in process water compete with each other to occupy the montmorillonite clay surface. At the pH value of process water (pH congruent with8), increasing the temperature did not change the value of bitumen droplet zeta potential. Stability of bitumen-in-water emulsions at 22 degrees C showed that bitumen droplets coalesced upon contact in the DIW+M system. The addition of calcium ions (Ca++) led to the inhibition of coagulation and coalescence of bitumen droplets, which may indicate the formation of CaM aggregates at the bitumen-water interface.     

{Pt

Prolonged evacuation of [{Pt(CO)(3)}(2)](2+) (1), the first homoleptic, dinuclear, cationic platinum(I) carbonyl complex, results in reversible disproportionation. Complex 1 was formed by dissolution of PtO(2) in concentrated H(2)SO(4) under an atmosphere of CO [Eq. (a)], and completely characterized by NMR ((13)C, (195)Pt), IR, and Raman spectroscopy.     

Intercalation of trioxatriangulenium ion in DNA: binding,electron transfer,x-ray crystallography,and electronic structure

Trioxatriangulenium ion (TOTA(+)) is a flat, somewhat hydrophobic compound that has a low-energy unoccupied molecular orbital. It binds to duplex DNA by intercalation with a preference for G-C base pairs. Irradiation of intercalated TOTA(+) causes charge (radical cation) injection that results in strand cleavage (after piperidine treatment) primarily at GG steps. The X-ray crystal structure of TOTA(+) intercalated in the hexameric duplex d[CGATCG](2) described here reveals that intercalation of TOTA(+) results in an unusually large extension of the helical rise of the DNA and that the orientation of TOTA(+) is sensitive to hydrogen-bonding interactions with backbone atoms of the DNA. Electronic structure calculations reveal no meaningful charge transfer from DNA to TOTA(+) because the lowest unoccupied molecular orbital of TOTA(+), (LUMO)(T), falls in the gap between the highest occupied molecular orbital, (HOMO)(D), and the (LUMO)(D) of the DNA bases. These calculations reveal the importance of backbone, water, and counterion interactions, which shift the energy levels of the bases and the intercalated TOTA(+) orbitals significantly. The calculations also show that the inserted TOTA(+) strongly polarizes the intercalation cavity where a sheet of excess electron density surrounds the TOTA(+).     

Influence of anchored cerium ions on the dispersity and activity of Pd/SiO2 catalysts

(Pd+Ce)/SiO₂ catalysts prepared by decomposition of organometallic complexes of Ce and Pd have higher activity, dispersity and selectivity in methanol synthesis than Pd/SiO₂ catalysts.

---

, (Pd+Ce)/SiO₂ , Ce Pd, Pd/SiO₂.

     

Comparison of total folate concentrations in foods determined by microbiological assay at several experienced U.S. commercial laboratories

Analysis of total folate concentration measured by microbiological assay in a variety of foods submitted in a routine manner to experienced laboratories that regularly perform folate analysis on fee-for-service basis was evaluated. Homogenates of fresh strawberries, frozen spinach, orange juice, frozen meat and vegetable pizza, dry macaroni, and dried pinto beans were prepared and stored under conditions previously determined to maintain stability of folate content. An aliquot of each composite and of 3 certified reference materials were sent on each of 4 occasions to 4 laboratories. Results for macaroni and pizza, the only folic acid-fortified foods, had considerably lower between-laboratory variation (CV(B)) with CV(B) of 9-11% versus >45% for other foods. Mean total folate ranged from 14 to 279 microg/100 g for a mixed vegetable reference material, from 5 to 70 microg/100 g for strawberries, and from 28 to 81 microg/100 g for wholemeal flour. Only 1 laboratory reported using a tri-enzyme extraction, and all laboratories used folic acid fortified foods as internal control materials. Users of commercial total folate analysis should understand the uncertainty in values determined by microbiological assay, particularly for foods containing primarily naturally occurring folate, which may not be apparent when replicate samples are not submitted for analysis.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

SEDIMENTATION ANALYSIS OF DNA PHOTOOXIDIZED IN THE PRESENCE OF THIOPYRONINE

Abstract. Illumination of single-stranded φ×174 phage DNA with visible lightλ > 500 nm) in the presence of the sensitizer thiopyronine results in both chain scissions detectable by velocity sedimentation in neutral medium and in alkali-labile bonds which yield secondary strand breaks after alkaline treatment. Compared with the generation of primary strand breaks, the formation of alkali-labile sites seems to be the predominant reaction.
Photodynamic treatment of homogeneous double-stranded Ta, phage DNA leads to changes in the overall conformation of DNA as revealed by an initial increase of the sedimentation coefficient. The simultaneous occurrence of different effects (decrease of molecular weight, increase of effective DNA flexibility) is particularly evident from changes in the sedimentation coefficient distribution. The fact that both processes influence the sedimentation behaviour questions the common procedure of calculating double-strand break numbers from sedimentation coefficient distributions on the basis of s#-M relations which are valid for intact DNA only.
Photooxidized double-stranded DNA exhibits an increased sensitivity against shear forces.