1H and 19F ultra-fast MAS double-quantum single-quantum NMR correlation experiments using three-spin terms of the dipolar homonuclear Hamiltonian

Measuring internuclear distances through dipolar interaction is a major challenge for solid-state nuclear magnetic resonance (NMR) spectroscopy. Obtaining reliable interatomic distances provides an access to the local structure in ordered or disordered solids. We show that at magic angle spinning (MAS) frequencies larger than ca. 50 kHz, some of the three-spin terms of the homogeneous homonuclear dipolar Hamiltonian can be used to promote the creation of double-quantum coherences between neighbouring (1)H or (19)F spins without using dipolar recoupling pulse sequences in the Dipolar Homonuclear Homogeneous Hamiltonian (DH(3)) double-quantum/single-quantum correlation experiment. This makes it possible to probe inter-nuclear spatial proximity with limited risk of probe or sample damage from radio-frequency (RF) irradiation, and is fully appropriate for fast repetition rate offering sensitivity gains in favourable cases. Experimental demonstrations are supported by multi-spin numerical simulations, which points to new possibilities for the characterization of spin-system geometries.     

Determination of seven arsenic species in seafood by ion exchange chromatography coupled to inductively coupled plasma-mass spectrometry following microwave assisted extraction: method validation and occurrence data

The determination of seven arsenic species in seafood was performed using ion exchange chromatography on an IonPac AS7 column with inductively coupled plasma mass spectrometry detection after microwave assisted extraction. The effect of five parameters on arsenic extraction recoveries was evaluated in certified reference materials. The recoveries of total arsenic and of arsenic species with the two best extraction media (100% H₂O and 80% aqueous MeOH) were generally similar in the five seafood certified reference materials considered. However, because MeOH co-elutes with arsenite, which would result in a positively biased arsenite concentration, the 100% H₂O extraction conditions were selected for validation of the method. Figures of merit (linearity, LOQs (0.019-0.075 mg As kg⁻¹), specificity, trueness (with recoveries between 82% (As(III)) and 104% (As(V) based on spikes or certified concentrations), repeatability (3-14%), and intermediate precision reproducibility (9-16%) of the proposed method were satisfactory for the determination of arsenite, monomethylarsonic acid, dimethylarsinic acid, arsenate, arsenobetaine and arsenocholine in fish and shellfish. The performance criteria for trimethylarsine oxide, however, were less satisfactory. The method was then applied to 65 different seafood samples. Arsenobetaine was the main species in all samples. The percentage of inorganic arsenic varied between 0.4-15.8% in shellfish and 0.5-1.9% at the utmost in fish. The main advantage of this method that uses only H₂O as an extractant and nitric acid as gradient eluent is its great compatibility with the long-term stability of both IEC separation and ICP-MS detection.     

Thermal and odd–even behaviour in a homologous series of lithium n-alkanoates

Thermotropic phase transition temperatures, enthalpies and entropies of phase changes and odd–even alternation, in a homologous series of anhydrous lithium n-alkanoates, LiC_nH_2n?1O₂ (LiC_8–19 inclusive), have been investigated by differential scanning calorimetry (d.s.c.), hot stage polarizing microscopy and solid state ¹³C NMR spectroscopy. The number of phases observed, between the room temperature microcrystalline solid and isotropic melt, shows a clear dependence on chain length. For LiC_8–13, only one intermediate lamellar II crystalline phase is observed. For LiC_14–19, a lamellar II and high temperature phase are evident. The high temperature phase is characterized by pre-melting and disordering of hydrocarbon chains as they change from nearly all-trans to one with increased gauche conformers. It is probably a solid rotator phase. Odd–even alternation in melting temperature, density and some thermodynamic data result from the relative distance between methyl groups, from opposite layers in a bi-layer. Molecular models indicate that the methyl groups in odd chains are more favourably orientated which lead to a more energetically favoured staggered conformer. As a consequence, the methyl groups, for odd chains, are in closer proximity than even chains. This subtle change in the molecular lattice could account for the presence of polymorphic structures on cooling from the melt.     

A mild synthesis of bis(indolyl)methanes using a deep eutectic solvent

Deep eutectic solvents (such as the combination of urea and choline chloride) are effective solvents/organocatalysts for the condensation of indole and aryl or alkenyl aldehydes to form bis(indolyl)methanes. The reaction conditions are quite mild and do not require additional Bronsted or Lewis acid catalyst, though they fail with ketones or aliphatic aldehydes. Given the inexpensive, non-toxic, and recyclable nature of the DES, these reaction conditions are simple and highly environmentally friendly.     

Analysis of green copper pigments in illuminated manuscripts by micro-Raman spectroscopy

In the majority of the literature describing green coloured materials used on ancient painting layers (15th or 16th century), two copper greens are mainly cited: malachite [CuCOr3 x Cu(OH)2] and verdigris [Cu(CH3COO)2 x [Cu(OH)2]3 x 2H2O]. It is shown, by micro-Raman spectroscopy, that the artists were actually employing more than these two copper greens, in particular various copper sulfates, among which the most common pigment found is posnjakite [CuSO4 x 3Cu(OH)2 x H2O]. In contrast to the PIXE (particle induced X-ray emission) technique, Raman spectroscopy is a technique of choice, able to distinguish not only a copper sulfate from a carbonate or acetate but also the different sulfates themselves; in this respect, we found that the high wavenumber region (2800-4000 cm(-1)), characteristic of H2O vibrations, is of particular interest. It is also shown that numerous green areas were created with mixtures of a copper sulfate mixed with other pigments, for instance to enhance the colour depth. Finally, in some cases, no green pigment is actually employed but the colour is obtained by intimately mixing yellow and blue pigments. All these results led to a new look at the pigments which were in use on the palettes of the ancient artists.     

Détermination de l'énergie de conjugaison des acides naphtoǐques

The present paper deals with the experimental and theoretical determination of energies of conjugation of organic molecules.A computation process has been applied, first to simple molecules comprising an hydrocarbon (styrene), an oxygen function (benzaldehyde) and a nitrogen function (aniline). The results are compared with those obtained from the literature.The application of this computation process to naphthoic acids permits the determination of energies of conjugation and isomerization of these molecules.     

Kinetics and mechanism of the reaction of tetracobalt dodecacarbonyl with carbon monoxide under pressure

The kinetics of the reaction of tetracobalt dodecacarbonyl with carbon monoxide to form dicobalt octacarbonyl in n-hexane have been investigated over a wide range of temperature and CO pressure. The reaction is first order in [Co₄(CO)₁₂]; the order in [CO] changes between one (at low pressures and high temperatures) and two (at high pressures and low temperatures).Activation parameters have been estimated and a mechanism involving initial reversible breaking of one CoCo bond, followed by irreversible breaking of a second, is proposed. The first step involves concerted addition of CO while the second can proceed with or without such addition.     

Solitonic waves in polyene dications and principles of charge carrier localization in π‐conjugated organic materials

The quantum‐chemical investigations by ab initio method (restricted Hartree–Fock/6‐31G**) have been performed for a series of unsubstituted, monosubstituted, and disubstituted neutral polyenes and their double charged cations. The waves of charge alternation (characterized by the difference in the electron densities at the nearest carbon atoms or Δq function) and bond length alternation (characterized by the lengths difference of the nearest carbon–carbon bonds or Δl function) are reported. Comparisons are made with the corresponding monocationic polymethine molecules. We found that ionization by two electrons results in formation of two solitonic waves of charge alternation, rather than superposition of two overlapping solitonic waves into one. These waves behave similar to two independent elastic particles, which do not penetrate into each other despite the special confinement by the length of chromophore π‐system. In monosubstituted polyene dication, Δq and Δl functions contain two waves each; however, only one wave is mobile and sensitive to a change of the chemical nature of the terminal group, whereas the second wave remains practically unchanged. The introduction of one oxymethyl or phenyl terminal groups leads to a relatively small shift of the mobile wave from the center to a direction of the terminal group. The effect of the amino or tropilium terminal groups is much more pronounced and leads to a shift of the mobile wave to the end of the molecule. In disubstituted polyene dication, both solitonic waves become mobile and shift symmetrically to both ends. The general principles of the charge localization described in this study may be used in molecular design and fine‐tuning of the charge transport properties in plastic photovoltaics and other organic semiconducting materials. © 2012 Wiley Periodicals, Inc.     

Polymer microfluidic chips for electrochemical and biochemical analyses

Our recent developments concerning the fabrication of polymer microchips and their applications for biochemical analyses are reviewed. We first describe two methods of fabrication of polymer microfluidic chips, namely UV-laser photoablation and plasma etching that are well suited for the prototyping and mass fabrication of microchannel networks with integrated microelectrodes. These microanalytical systems can be coupled with various detection means including mass spectrometry, and their applications in capillary electrophoresis are presented here. We also present how UV laser photoablation can be used for the patterning of biomolecules on polymer surfaces for generating two-dimensional arrays of microspots to carry out affinity assays. Finally, the use of the microchips for the development of fast affinity and immunological assays with electrochemical detection is presented, demonstrating the potential of these polymer microchips for medical diagnostics and drug discovery.