Solid-phase extraction of fluoxetine and norfluoxetine from serum with gas chromatography-electron-capture detection

A rapid, selective, and sensitive method is described for the purification and analysis of fluoxetine and norfluoxetine using a solid-phase extraction column and gas chromatography-electron-capture detection. Linear quantitative response curves for fluoxetine and norfluoxetine are generated over a concentration range of 20-200 ng/ml. Overall extraction efficiency of the extraction procedure is found to be greater than 90% and greater than 75% with correlation coefficients of 0.997 and 0.993 for fluoxetine and norfluoxetine, respectively.     

Zeta-potentials of self-assembled surface micelles of ionic surfactants adsorbed at hydrophobic graphite surfaces

The zeta-potentials of the self-assembled surface ionic surfactants (sodium dodecyl sulfate—SDS and hexadecyltrimethyl ammonium bromide—CTAB) on graphite surfaces were determined both from streaming potential and electrophoretic mobility measurements. The adsorption of the surfactants at graphite–liquid interfaces has been studied using atomic force microscopy (AFM) soft-contact imaging which shows the formation of linear, parallel hemicylinders with headgroups oriented towards the solution. The magnitude of the zeta-potential increased with an increase in surfactant concentration, reaching a constant value at a concentration corresponding to the point of surface micelle formation as confirmed from AFM imaging. The streaming potential and electrophoretic mobility measurements showed that the zeta-potentials of SDS and CTAB surface micelles adsorbed at the graphite surface were about −75 and +70 mV, respectively, well in agreement with the values reported for bulk phase micelles in the literature.     

Gas Hydrate Formation in Reversed Micelles

We describe a technique to modify protein solubility and optimize enzyme activity in reversed micellar solutions. The technique is based on the ability of hydrates of natural gas to form in the micro-aqueous phase. Clathrate hydrates are crystalline inclusions of water and gas, and their formation in bulk water has traditionally been studied with relevance to natural gas recovery. We have found that hydrates can form in the environment of the microaqueous pools of reversed micelles, and that their extent of formation can be well controlled through the thermodynamic variables of temperature and pressure. Additionally, formation of hydrates affects the size and aggregation number of the micelles, and thus influences the solubility and conformation of encapsulated proteins. We demonstrate how the concept can be used in two applications: (i) protein extraction into reversed micelles and subsequent recovery, and (ii) optimization of enzyme activity in reversed micelles.     

Modification of the electrokinetic properties of reversible electrophoresis gels for the separation and preparation of DNA

The effect of adding linear polymers to a novel reversible electrophoretic was measured. Reversible gels are formed using the polyanionic carbohydrate polymer, gellan gum. Gellan gum forms strong stable gels in the presence of divalent cations or diamines. The gels are reversible (return to solution) by changing the ionic environment or pH. Gellan gum is an anionic polymer, and the electrophoresis gels have considerable electroosmotic flow (EOF) toward the negative electrode. We measured the EOF in gellan gum electrophoresis gels as a function of gel concentration, buffer composition, and linear polymer additive. The linear polymers used in this study were polyethylene oxide and hydroxyethyl cellulose. Both polymers reduced EOF in the gels, in a manner dependent on molecular weight. Polymers with high molecular weight were more effective at reducing EOF. The addition of polymers increased the resolution of low molecular weight DNA. Native gellan gum resolved DNA from approx 50,000 to 1000 bp. Addition of the polymers resolved DNA down to approx 50 bp, in some instances. The influence of the polymers on circular plasmid DNA was also investigated. Addition of high molecular weight polyethylene oxide reduced the electrophoretic mobility of the nicked circular form compared to the supercoiled form.     

Steps to demarcate the effects of chromophore aggregation and planarization in poly(phenyleneethynylene)s. 2. The photophysics of 1,4-diethynyl-2-fluorobenzene in solution and in crystals

Crystals of 1,4-bis(2-hydroxy-2-methyl-3-butynyl)-2-fluorobenzene 4 have a rich packing structure with four distinct molecules in the unit cell. A complex hydrogen bonding network results in the formation of cofacial trimers, cofacial dimers, and monomers within the same unit cell. Given a remarkable opportunity to investigate the effect of aggregation on the photophysics of 1,4-diethynylbenzenes, we analyzed the absorption, diffuse reflectance, and emission spectra of compound 4 in solutions and in crystals. Diffuse reflectance and fluorescence excitation revealed a red-shifted absorption that is absent in dilute solution but becomes observable at high concentrations and low temperatures. The fluorescence emission in the solid state is dual with components assigned to monomers and aggregates. The excitation and emission assigned to the monomer are nearly identical in crystals and dilute solutions. The absorption and emission bands assigned to aggregates are broad and red-shifted by 60--80 nm. As expected for a sample with absorbers and emitters with different energies and incomplete equilibration, efficient monomer-to-aggregate energy transfer was observed by a proper selection of excitation wavelengths. The fluorescence quantum yield of 4 in solution is relatively low (Phi(F) = 0.15) and the singlet lifetime short (tau(F) = 3.8 ns). A lower limit for the triplet yield of Phi(T) = 0.64 was determined indirectly in solution by (1)O(2) sensitization, and a relatively strong and long-lived phosphorescence was observed in low-temperature glasses and in crystals at 77 K.     

A study of the gold/aqueous electrolyte interphase by modulated reflection spectroscopy

The admittance and differential reflectivity of an electrode of polycrystalline gold in contact with aqueous 0.02 M NaF, KClO₄, 0.01 M Na₂SO₄ and KCl have been measured in the range of potential where the electrode is ideally polarized (?0.7 V to 0.8 V NHE). In NaF and KClO₄ evidence was obtained for the compression of the adsorbed layer of water. The increase of the number of water molecules, with respect to the number in the least original state (at?4μC cm^?2), is 3% at +8 μC cm^?2 and at?17 μC cm^?2. At the potential of zero charge the water dipoles are oriented preferentially with the oxygen towards the metal. In KCl the optical measurements confirm the existence of two types of Au?Cl^? interaction and the covalent character of the bond at the most positive charges.     

Synthesis of PI3K inhibitor GDC-0077 via a stereocontrolled N-arylation of α-amino acids

An efficient synthesis of PI3K inhibitor GDC-0077, featuring two consecutive Cu-catalyzed CN coupling reactions, is reported. The described synthetic route involves a chemoselective Ullmann-type coupling of a chiral difluoromethyl-substituted oxazolidinone, a Cu-catalyzed N-arylation of l-alanine with high stereochemical integrity, and a high-yielding final amide bond formation step to produce GDC-0077 in >99.5 area % HPLC purity.     

A laser desorption fourier transform mass spectrometric study of dimethyl 8-acetyl-3,7,12,17-tetramethylporphyrin-2,18-dipropanoate

Laser desorption Fourier transform ion cyclotron resonance positive- and negative-ion mass spectra are presented for dimethyl 8-acetyl-3,7,12,17-tetramethylporphyrin-2,18-dipropanoate. The 248-nm laser ionization thresholds for both positive and negative ions are observed to be about 2.5 MW cm^?2. The M⁺˙ molecular ion is assigned to the base peak in the low-power spectra whereas it is the M^?˙ ion for the corresponding anion spectra. Increased intensities of [M + H]⁺ and [M ? H]^? are observed with increased laser fluences of up to 38 MW cm^?2. At high laser powers the negative-ion results reveal that a series of carbon-nitrogen cumulene and polyacetylene cluster ions are formed. Laser evaporation/multiphoton ionization/ and thermal evaporation/electron impact ionization/collision-induced dissociation experiments carried out on the porphyrin M⁺˙ and [M + H]⁺ ions over a range of translational kinetic energies and delay times after acceleration are compared and used to obtain mechanistic and structural information. In contrast to the electron impact experiments, which show only side-chain cleavage, the laser-based collision-induced dissociation experiments reveal that, in addition to side-chain cleavage, it is possible to cleave the porphyrin ring to various extents depending on the ion translational energy selected.     

Access to 2-fluoroacrylates and their 3-chloro derivatives by chemical hydrogenolysis of 3,3-dichloro-2-fluoroacrylates

The formation of 3-chloro-2-fluoroacrylates 2 and 2-fluoroacrylates 3 by hydrogenolysis of 3,3-dichloro-2-fluoroacrylates 1 was studied by using Bu₃SnH, zinc, the sodium sulphite/sodium formate mixture or iron pentacarbonyl in the presence of a hydrogen donor (Et₃SiH or CH₃OH). The two last couples can be used to prepare the 3-chloro derivatives 2, whereas for the preparation of the 3,3-dihydro derivatives 3, zinc is the most appropriate reducing agent. Keywords: 2-Fluoroacrylate; 3-Chloro-2-fluoroacrylate; 3,3-Dichloro-2-fluoroacrylate; Tributyltin hydride; Zinc; Sodium sulphite; Sodium formate; Iron pentacarbonyl; NMR spectroscopy; IR spectroscopy