Parking Capacity and Pricing in Park'n Ride Trips: A Continuous Equilibrium Network Design Problem

In this paper we consider the problem of designing parking facilities for park'n ride trips. We present a new continuous equilibrium network design problem to decide the capacity and fare of these parking lots at a tactical level. We assume that the parking facilities have already been located and other topological decisions have already been taken.The modeling approach proposed is mathematical programming with equilibrium constraints. In the outer optimization problem, a central Authority evaluates the performance of the transport network for each network design decision. In the inner problem a multimodal traffic assignment with combined modes, formulated as a variational inequality problem, generates the share demand for modes of transportation, and for parking facilities as a function of the design variables of the parking lots. The objective is to make optimal parking investment and pricing decisions in order to minimize the total travel cost in a subnetwork of the multimodal transportation system.We present a new development in model formulation based on the use of generalized parking link cost as a design variable.The bilevel model is solved by a simulated annealing algorithm applied to the continuous and non-negative design decision variables. Numerical tests are reported in order to illustrate the use of the model, and the ability of the approach to solve applications of moderate size.     

An attempt on the calculation of relativistic potential energy curves: Noble gas difluorides

Total energy SCF calculations were performed for noble gas difluorides in a relativistic procedure and compared with analogous non-relativistic calculations. The discrete variational method with numerical basis functions was used. Rather smooth potential energy curves could be obtained. The theoretical Kr-F and Xe-F bond distances were calculated to be 3.5 a.u. and 3.6 a.u. which should be compared with the experimental values of 3.54 a.u. and 3.7 a.u. Although the dissociation energies are off by a factor of about five it was found that ArF₂ may be a stable molecule. Theoretical ionization energies for the outer levels reproduce the experimental values for KrF₂ and XeF₂ to within 2 eV.     

On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.     

Dual frames in connected with generalized sampling in shift-invariant spaces

The aim of this article is to derive stable generalized sampling in a shift-invariant space by using some special dual frames in L²(0,1). These sampling formulas involve samples of filtered versions of the functions in the shift-invariant space. The involved samples are expressed as the frame coefficients of an appropriate function in L²(0,1) with respect to some particular frame in L²(0,1). Since any shift-invariant space with stable generator is the image of L²(0,1) by means of a bounded invertible operator, our generalized sampling is derived from some dual frame expansions in L²(0,1).     

Preparation of activated carbons from cherry stones by activation with potassium hydroxide

Using cherry stones, the preparation of activated carbon has been undertaken in the present study by chemical activation with potassium hydroxide. A series of KOH-activated products was prepared by varying the carbonisation temperature in the 400-900 °C range. Such products were characterised texturally by gas adsorption (N₂, −196 °C), mercury porosimetry, and helium and mercury density measurements. FT-IR spectroscopy was also applied. The carbons prepared as a rule are microporous and macroporous solids. The degree of development of surface area and porosity increases with increasing carbonisation temperature. For the carbon heated at 900 °C the specific surface area (BET) is 1624 m² g⁻¹, the micropore volume is 0.67 cm³ g⁻¹, the mesopore volume is 0.28 cm³ g⁻¹, and the macropore volume is 1.84 cm³ g⁻¹.     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

Asymptotic Behavior of Sobolev-Type Orthogonal Polynomials on a Rectifiable Jordan Curve or Arc

Our object of study is the asymptotic behavior of the sequence of polynomials orthogonal with respect to the discrete Sobolev inner product <formula> \langle f, g \rangle = ∈t_{E} f(ξ) \overline{g(ξ)} ρ(ξ) |d ξ|+ f(Z) A g(Z)^H, </formula> where E is a rectifiable Jordan curve or arc in the complex plane f(Z) = (f(z_1), \ldots, f^{(l_1)}(z_1) , \ldots , f(z_m) , \ldots ,f^{(l_m)}(z_m)), A is an M \times M Hermitian matrix, M l ₁ + ⋅s + l _m + m , |d ξ| denotes the arc length measure, ρ is a nonnegative function on E , and z _i ∈Ω, i=1,2,\ldots,m , where Ω is the exterior region to E . July 23, 1999. Dates revised: September 11, 2000 and February 16, 2001. Date accepted: February 26, 2001.     

The phase composition of tin-nickel electrodeposited alloys

It was studied the tin phase composition of the electrodeposited alloys produced at different temperatures and current densities from an acid chloride/fluoride electrolyte and an acid chloride bath. Mössbauer spectra were consistent with a Ni₃Sn₄ intermetallic compound, dissolved tin, and a Cu?Sn intermetallic compound formed at the interface of the copper substrate.