Electrochemical properties of two dimensional assemblies of insulating diamond particles

The electrochemical properties of two-dimensional assemblies of 500 nm type Ib diamond particles are investigated as a function of their surface oxidation state. High Pressure High Temperature particles are sequentially exposed to a hot strong acid bath and to H(2) plasma in order to generate oxygen (ODP) and hydrogen surface terminations (HDP). Changes in the surface composition following the chemical treatments are confirmed by FTIR. Electrophoretic mobility measurements show that the diamond particles exhibit a negative surface charge at pH above 7 independently of the surface termination. Oxidation in the acid bath and subsequent reduction in the H(2) plasma only affects about 30% of the particle surface charge. The intrinsic negative charge allows the formation of 2D assemblies by electrostatic adsorption on poly(diallyldimethylammonium chloride) (PDADMAC) modified In-doped SnO(2) electrodes (ITO). The particle number density in the assembly was controlled by the adsorption time up to a maximum coverage of ca. 40%. Cyclic voltammetry in the absence of redox species in solution show that the acid treatment effectively removes responses associated with sp(2) carbon impurities, resulting in a potential independent capacitive signal. On the other hand, HDP assemblies are characterized by a charging process at a potential above 0.1 V vs Ag/AgCl. These responses are associated with hole-injection into the valence band edge which is shifted to approximately -4.75 eV vs vacuum upon hydrogenation. Information concerning the position of the valence band edge as well as hole number density at the HDP surface as a function of the applied potential are extracted from the electrochemical analysis.     

Controlling E. coli adhesion on high-k dielectric bioceramics films using poly(amino acid) multilayers

The influence of high-k dielectric bioceramics with poly(amino acid) multilayer coatings on the adhesion behavior of Escherichia coli (E. coli) was studied by evaluating the density of bacteria coverage on the surfaces of these materials. A biofilm forming K-12 strain (PHL628), a wild-type strain (JM109), and an engineered strain (XL1-Blue) of E. coli were examined for their adherence to zirconium oxide (ZrO(2)) and tantalum oxide (Ta(2)O(5)) surfaces functionalized with single and multiple layers of poly(amino acid) polyelectrolytes made by the layer-by-layer (LBL) deposition. Two poly(amino acids), poly(l-arginine) (PARG) and poly(l-aspartic acid) (PASP), were chosen for the functionalization schemes. All three strains were found to grow and preferentially adhere to bare bioceramic film surfaces over bare glass slides. The bioceramic and glass surfaces functionalized with positively charged poly(amino acid) top layers were observed to enhance the adhesion of these bacteria by up to 4-fold in terms of bacteria surface coverage. Minimal bacteria coverage was detected on surfaces functionalized with negatively charged poly(amino acid) top layers. The effect of different poly(amino acid) coatings to promote or minimize bacterial adhesion was observed to be drastically enhanced with the bioceramic substrates than with glass. Such observed enhancements were postulated to be attributed to the formation of higher density of poly(amino acids) coatings enabled by the high dielectric strength (k) of these bioceramics. The multilayer poly(amino acid) functionalization scheme was successfully applied to utilize this finding for micropatterning E. coli on bioceramic thin films.     

Phase networks of cross-β peptide assemblies

Recent evidence suggests that simple peptides can access diverse amphiphilic phases, and that these structures underlie the robust and widely distributed assemblies implicated in nearly 40 protein misfolding diseases. Here we exploit a minimal nucleating core of the Aβ peptide of Alzheimer's disease to map its morphologically accessible phases that include stable intermolecular molten particles, fibers, twisted and helical ribbons, and nanotubes. Analyses with both fluorescence lifetime imaging microscopy (FLIM) and transmission electron microscopy provide evidence for liquid-liquid phase separations, similar to the coexisting dilute and dense protein-rich liquid phases so critical for the liquid-solid transition in protein crystallization. We show that the observed particles are critical for transitions to the more ordered cross-β peptide phases, which are prevalent in all amyloid assemblies, and identify specific conditions that arrest assembly at the phase boundaries. We have identified a size dependence of the particles in order to transition to the para-crystalline phase and a width of the cross-β assemblies that defines the transition between twisted fibers and helically coiled ribbons. These experimental results reveal an interconnected network of increasing molecularly ordered cross-β transitions, greatly extending the initial computational models for cross-β assemblies.     

Monovalent ion adsorption at the muscovite (001)-solution interface: relationships among ion coverage and speciation, interfacial water structure, and substrate relaxation

The interfacial structure between the muscovite (001) surface and aqueous solutions containing monovalent cations (3 × 10(-3) m Li(+), Na(+), H(3)O(+), K(+), Rb(+), or Cs(+), or 3 × 10(-2) m Li(+) or Na(+)) was measured using in situ specular X-ray reflectivity. The element-specific distribution of Rb(+) was also obtained with resonant anomalous X-ray reflectivity. The results demonstrate complex interdependencies among adsorbed cation coverage and speciation, interfacial hydration structure, and muscovite surface relaxation. Electron-density profiles of the solution near the surface varied systematically and distinctly with each adsorbed cation. Observations include a broad profile for H(3)O(+), a more structured profile for Li(+) and Na(+), and increasing electron density near the surface because of the inner-sphere adsorption of K(+), Rb(+), and Cs(+) at 1.91 ± 0.12, 1.97 ± 0.01, and 2.26 ± 0.01 ?, respectively. Estimated inner-sphere coverages increased from ~0.6 to 0.78 ± 0.01 to ~0.9 per unit cell area with decreasing cation hydration strength for K(+), Rb(+), and Cs(+), respectively. Between 7 and 12% of the Rb(+) coverage occurred as an outer-sphere species. Systematic trends in the vertical displacement of the muscovite lattice were observed within ~40 ? of the surface. These include a <0.1 ? shift of the interlayer K(+) toward the interface that decays into the crystal and an expansion of the tetrahedral-octahedral-tetrahedral layers except for the top layer in contact with solution. The distortion of the top tetrahedral sheet depends on the adsorbed cation, ranging from an expansion (by ~0.05 ? vertically) in 3 × 10(-3)m H(3)O(+) to a contraction (by ~0.1 ?) in 3 × 10(-3) m Cs(+). The tetrahedral tilting angle in the top sheet increases by 1 to 4° in 3 × 10(-3) m Li(+) or Na(+), which is similar to that in deionized water where the adsorbed cation coverages are insufficient for full charge compensation.     

Evidence for the Preservation of Native Inter- and Intra-Molecular Hydrogen Bonds in the Desolvated FK-Binding Protein·FK506 Complex Produced by Electrospray Ionization

It is now well established that electrospray ionization (ESI) is capable of introducing noncovalent protein assemblies into a desolvated environment, thereby allowing their analysis by mass spectrometry. The degree to which native interactions from the solution phase are preserved in this environment is less clear. Site-directed mutagenesis of FK506-binding protein (FKBP) has been employed to probe specific intra- and inter-molecular interactions within the complex between FKBP and its ligand FK506. Collisional activation of wild-type and mutant-FKBP?FK506 ions, generated by ESI, demonstrated that removal of native protein-ligand interactions formed between residues Asp37, Tyr82, and FK506 significantly destabilized the complex. Mutation of Arg42 to Ala42, or Tyr26 to Phe26 also resulted in lower energy dissociation of the FKBP·FK506 complex. Although these residues do not form direct H-bonds to FK506, they interact with Asp37, ensuring its correct orientation to associate with the ligand. Comparison with solution-based affinity measurements of these mutants has been discussed, including the stabilization afforded by ordered water molecules. Ion mobility spectrometry (IMS) has been employed to provide gas-phase structural information on the unfolding of the complexes. The [M + 6H](6+) complexes of the wild-type and mutants have been shown to resist unfolding and retain compact conformations. However, removal of the basic Arg42 residue was found to induce significant structural weakening of the [M + 7H](7+) complex when raised to dissociation-level energies. Overall, destabilization of the FKBP·FK506 complex, resulting from targeted removal of specific H-bonds, provides evidence for the preservation of these interactions in the desolvated wild-type complex.     

The electrochemical detection of tagged nanoparticles via particle-electrode collisions: nanoelectroanalysis beyond immobilisation

The use of particle-impact coulometry in identifying and quantifying nanoparticles tagged (or labelled) with electroactive molecules is demonstrated via the detection of 1,4-nitrothiophenol-tagged silver nanoparticles in aqueous dispersion at potentials more negative than -0.17 V (vs. Ag/AgCl, the reduction potential of nitrothiophenol) via monitoring of particle-electrode collisions.     

Synthesis and characterisation of BODIPY radical anions

The redox processes associated with BODIPY analogues are studied by electrochemical and spectroscopic methods revealing a characteristic profile for the persistent BODIPY radical and quenching of fluorescence upon reduction.     

An efficient computational model to predict the synthetic utility of heterocyclic arynes

Think before you act: a computational approach is reported for evaluating the synthetic potential of heterocyclic arynes. Routine and rapid calculations of arene dehydrogenation energies and aryne angle distortion predict the likelihood that a given hetaryne can be generated, as well as the degree of regioselectivity expected in a reaction between a given hetaryne and a nucleophilic trapping agent.     

High current density electrodeposition from silver complex ionic liquids

Liquid metal salts are electrolytes with the highest possible metal concentration for electrodeposition, because the metal ion is an integral part of the solvent. This paper introduces the new ionic silver complexes [Ag(MeCN)(4)](2)[Ag(Tf(2)N)(3)], [Ag(MeCN)][Tf(2)N] and [Ag(EtIm)(2)][Tf(2)N], where MeCN stands for acetonitrile, EtIm for 1-ethylimidazole and Tf(2)N is bis(trifluoromethylsulfonyl)imide. These complexes have been characterized by differential scanning calorimetry, single crystal X-ray crystallography, thermogravimetrical analysis, Raman spectroscopy and cyclic voltammetry. [Ag(MeCN)(4)](2)[Ag(Tf(2)N)(3)] is a room temperature ionic liquid. Smooth silver layers of good quality could be deposited from it, at current densities of up to 25 A dm(-2) in unstirred solutions. [Ag(EtIm)(2)][Tf(2)N] melts at 65 °C and can be used as an electrolyte for silver deposition above this temperature. [Ag(MeCN)][Tf(2)N] has a melting point that is too high to be useful in electrodeposition. Addition of thiourea or 1H-benzotriazole to the electrolyte decreased the surface roughness of the silver coatings. The morphology of the metal layers was investigated by atomic force microscopy (AFM). Adsorption of 1H-benzotriazole on the silver metal surface has been proven by Raman spectroscopy. This work shows the usefulness of additives in improving the quality of metal films electrodeposited from ionic liquids.     

Regioselectivity of Diels-Alder reactions between 6,7-dehydrobenzofuran and 2-substituted furans

We describe the first report of the generation of 6,7-dehydrobenzofuran(6,7-benzofuranyne) from 6,7-dihalobenzofurans via metal-halogen exchange and elimination, in a manner similar to our previous work with 6,7-indole arynes. This benzofuranyne undergoes highly regioselective Diels-Alder cycloadditions with 2-substituted furans.