Operational characteristics and power scaling of a transverse flow transversely excited CW CO<Subscript>2</Subscript> laser

Transverse flow transversely excited (TFTE) CO₂ lasers are easily scalable to multikilowatt level. The laser power can be scaled up by increasing the volumetric gas flow and discharge volume. It was observed in a TFTE CW CO₂ laser having single row of pins as an anode and tubular cathode that the laser power was not increasing when the discharge volume and the gas volumetric flow were increased by increasing the electrode separation keeping the gas flow velocity constant. The discharge voltage too remained almost constant with the change of electrode separation at the same gas flow velocity. This necessitated revision of the scaling laws for designing this type of high power CO₂ laser. Experimental results of laser performance for different electrode separations are discussed and the modifications in the scaling laws are presented.     

Mixing characteristics of motionless mixers

Motionless mixers have found a large range of applications, including blending, reaction, dispersion, heat transfer and mass transfer. Understanding the mixing processes that occur in these diverse systems is essential for predicting many aspects of practical importance. The objective of this study is to perform the experimental investigations of mixing characteristics for three different motionless mixers. The red color dye tracer was mixed in the main stream of green hair styling gel, and then the mixing efficiency was quantified by calculating the percentage area concentration of red color at the outlet cross section using a digital image processing technique. In the Sulzer SMX and YHC mixer, a single element mixes the fluid nearly in two dimensions, and three-dimensional mixing is accomplished by the next elements aligned at 90o to their former one. In the Sulzer SMX mixer, the flow appears to be globally well mixed after 5 elements, while in the YHC and YNU mixers, it is necessary to globally well mix more than 1 and 2 elements.     

An Enhancement of the Drezner—Wesolowsky Algorithm for Single-Facility Location with Maximin of Rectilinear Distance

In this note, we examine the algorithm of Drezner and Wesolowsky for locating a facility with maximin rectilinear distance to a given set of demand points. The concept of the closest-point constraint is introduced as a technique for increasing the efficiency of the algorithm. This potential increase in efficiency is demonstrated by an example.     

Scheduling Parts in a Combined Production-transportation Work Cell

This paper is concerned with a combined production-transportation scheduling problem. The problem comprises a simple, two-machine, automated manufacturing cell, which either stands alone or is a subunit of a complete flexible manufacturing system. The cell consists of two machines in series with a dedicated part-handling device such as a crane or robotic arm for transferring parts from the first machine to the second. The loading of a new piece on the first machine and the ejection of a finished piece from the second machine are performed by dedicated automated mechanisms. The introduction of parts into the system is done n at a time, whereby the parts are reshuffled into a sequence that minimizes completion time. All processing and transfer times are considered deterministic—a reasonable assumption for a cell comprising a robotic transfer device and two CNC machining units. What complicates the problem is the assumption of a non-negligible time for the transfer device to return (empty) from the second machine to the first. The operation is a generalization of a two-machine flowshop problem, and is formulated as a specially structured, asymmetric travelling salesman problem. An approximate polynomial time 0(n log n) algorithm is proffered. The procedure incorporates a lower bound using the Gilmore–Gomory algorithm for the no-wait, two-machine flowshop problem.     

Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Clumping Data in 2-Way Tables: A User-Orientated Perspective

Following a critique of existing algorithms, an algorithm is presented which will re-organize a 2-way data table to bring like rows together, and like columns together. Extensions of the method are described, and justified, to accommodate distances measured in modular arithmetic, and with bipolar columns/rows, as in repertory grid analysis. One value of the algorithms is that the user can see relationships in the tables without the data in the cells themselves ever having been transformed. Thus, users will continue to feel they own their data.     

Refining the Diffusion Approximation for the <Emphasis Type="Italic">GI</Emphasis><Superscript><Emphasis Type="Italic">x</Emphasis></Superscript><Emphasis Type="Italic">/G/c</Emphasis> Queue

This paper deals with the GI ^x /G/c queueing system in a steady state. We refine a diffusion approximation method incorporating the constraint of traffic conservation for general queueing systems. An approximate expression for the distribution of the number of customers is obtained. Numerical results are presented to show that the refined model provides improved performance.     

Investigations of the interlayer coupling in high-<Emphasis Type="Italic">T</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript> cuprates

Low-field magnetizationM(H) measurements can be used to probe the nature of the screening currents and the interlayer coupling in high-T _c cuprates. Here we compare theM(H) behaviour of single crystals of Bi₂Sr₂CaCu₂O₈ and fully oxygenated and oxygen reduced YBa₂Cu₃O_7??. In YBa₂Cu₃O₇, theM(H) behaviour is consistent with anisotropic 3D superconductivity whilst in Bi₂Sr₂CaCu₂O₈, the surface screening currents are strongly affected by the presence of vortices, implying that the CuO₂ planes are coupled via a weak Josephson interaction. In oxygen-deficient YBa₂Cu₃O_6.7 (T _c =63K), theM(H) behaviour at low temperatures is similar to that found for Bi₂Sr₂CaCu₂O₈, implying that the removal of oxygen from the chains has resulted in a dimensional crossover of the superconducting state in YBa₂Cu₃O_7??. As the temperature approachesT _c , the 3D behaviour is eventually restored as thec-axis coherence length ξ _c becomes comparable with the interlayer spacingd.